1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Hoppes Ethan Allen Pepperbox

Discussion in 'Blackpowder' started by josiewales, Mar 17, 2012.

  1. josiewales

    josiewales Well-Known Member

    Hi guys,
    I just got a Hoppes Ethen Allen Pepperbox. I was working the action(not dry firing btw) and the spring broke:fire::cuss::banghead::confused::mad:. My question is; where can I get another spring. I looked at dixie gun works but, that was a no go. Any help would be really appreciated. Thanks.
  2. Chawbaccer

    Chawbaccer Well-Known Member

    That a flat spring? Used to be that if you sent the broken spring pieces to Dixie, they would get you one that would work.
  3. arcticap

    arcticap Well-Known Member

    You may need to make one yourself or find a good black powder gunsmith that will make one for you.
    Or perhaps a similar spring can be found that can be modified to work.
    A pamphlet that is highly recommended by some of the many spring makers on the American Longrifles Forum is Simplified V-Springs Manual by Kit Ravenshear which is sold by Dixie Gun Works.


    Dixie also sells spring stock in 5 different thickness to use for making a variety of springs.

    There's also many helpful threads on ALR about how to make springs:



    Last edited: Mar 18, 2012
  4. josiewales

    josiewales Well-Known Member

    Thanks a lot guys.

Share This Page