1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

How to contact Sig Sauer?

Discussion in 'Handguns: Autoloaders' started by AcceptableUserName, May 20, 2010.

  1. I don't feel like calling cross country and sitting on hold for 15 minutes to haggle about warranty. Does anyone know of an alternative contact method? The website is unhelpful in classi Sig fashion, but I did rediscover this laugher :

    "If the gun was manufactured or imported by us, we can get the date of manufacture from our Records Department. This is offered as a service: SIG OFFICIAL DATE OF MANUFACTURE CERTIFICATE $12.95 To order, please call customer service @ (603) 418-8102 with a Visa, MasterCard or American Express. We do not recommend sending credit card information via email. Please allow 2-3 weeks for research, printing and shipping "

    Ha ha ha. I love Sigs, but will NEVER buy a new one. This company's CS is terrible.
  2. rellascout

    rellascout member

    No they do not answer emails very often. Phone is your best option.
  3. 357SIG

    357SIG Well-Known Member

    Phone is it.
  4. TurboFC3S

    TurboFC3S Well-Known Member

    So you haven't even tried to call them, but can still somehow say their CS is terrible? I've used their CS twice. Both times had a person on the phone inside of 30 seconds, within 5 minutes had the pre-paid return label in my email, and the gun repaired and back in my hands in a week.
  5. rellascout

    rellascout member

    I have dealt with their CS department several times. I have taken issues to Bill Silver th VP of commercial sales and Diane Chapman the head of customer service and I can say without a doubt from the top down they do not care about the avg commercial customer.

    As their volume has gone up they have not scaled their CS to handle the increased volume that their CS department now sees. This was told to me directly by Ms. Chapman. They know that they have a problem and most consumers when they call also become aware of the issues.

  6. ACTUALLY, I've tried to call them three times, sat on hold for 15 minutes each time, and 2 of the three left a polite voicemail that went unreturned. Their customer service is terrible. Paying to find out the date your pistol was manufactured is a joke. Where in my original statement did I expressly say I hadn't tried to contact them?

    Also, the lack of customer service WILL hurt them. There's been plenty of statistics to show how poor customer service drives business away.
  7. JohnBT

    JohnBT Well-Known Member

    I got through the first time after less than 5 minutes on hold.

    If you don't like waiting, well, write 'em a letter. :cool:
  8. rellascout

    rellascout member

    Why do people feel the need to defend Sig Customer service? Do you have a personal stake in Sig? The reality is that Sig customer service is not good these days.

    PS They used to tell you that info for free.
    Last edited: May 20, 2010
  9. SigP229R

    SigP229R Well-Known Member

    I have contacted sig on two or three different occasions and have never had a problem and have NOT had to be on hold more than 3 mins at any one given time. If you get connected with Victoria Martin your CS experience will be nothing but top flight.
  10. what happens if you don't happen to get through to ms. martin? :eek:
  11. M2 Carbine

    M2 Carbine Well-Known Member

    I've called SIG twice recently (888-285-3858). Both times I wasn't on hold more than 4-5 minutes.
    The two people were helpful.

    First time I needed the parts that are giving recoil spring trouble in the 522 rifle.
    Second time was a couple days ago because I have to send in my P238. (I don't really expect them to fix the gun because the problem seems to be too common in the P238).
    They immediately e-mailed a shipping label to me.

    Each time the people I talked to did their job as I would want them to.

    So far I can't say much for their products but the CS has been OK.
  12. Lonestar49

    Lonestar49 Well-Known Member


    Agreed, just make the call.. IF you're pleasant, they're pleasant, and in my 2 calls/needs, last year, they went up, and beyond, my expectations sending me 2 "free" P229/40 return springs when my 229 9mms "kit" showed up 5 days later but the 40cal kits were back-ordered..

    Second call: I really just needed the return springs, kits were a more save-money long term second thought.. Sigs CS (she) said "hang-on".. Mr. Ls, I show 800 40cal return springs in stock, kits are about 25 days away from being filled.. 2 springs leaving today..

    Arrived 3 days later: no charge.. Kits arrived 3 weeks later, with return springs, what I paid for, but expected the kits to not have return springs in them..

    Company takes care of those that "communicate politely/well"..

    Give them a call,

  13. Rule3

    Rule3 Well-Known Member

    I called Sig this morning. "Your call is the 2nd call to be answered"

    You need to call early.

    I have called twice in the last few weeks and both times I got Victoria. She is excellent, I think I am in love.:)
  14. The Lone Haranguer

    The Lone Haranguer Well-Known Member

    Just call them; it wasn't that bad

    I called them several times in 2007 about a problematic gun. I was not on hold for an excessive length of time and the people I talked to (a Jason, Victoria Martin and a Ray) were 100% professional.
  15. swiftak

    swiftak Well-Known Member

    So sell your Sig and buy something else.:banghead:
    Last edited: May 20, 2010
  16. inSight-NEO

    inSight-NEO Well-Known Member

    There are two sides to this coin...Why do people feel the need to blast Sig CS all of the time? My own experience (the one time I actually needed them), involved a 10 minute wait via phone, a type written letter and 2 weeks later, my gun was returned to me...with the problem solved.

    I wont argue that Sig CS is the best in the business. But, the worst? It all depends on the time of day and which day you call. Unfortunately, along with this, the individual who answers the phone could either be a detriment or a time-saver. This gives you about a 60/40 chance (60 being on the better end). Great? No. But, the worst? Im not buying it.

    Either way. Keep calling. The only manufacturer(s) I have had experience with who are quite expeditious at returning e-mails would be Springfield Armory and Benelli.

    Oh..and to those who constantly opine about the new Sigs being crap... I will agree that they have lost "focus," thanks to relatively new management, and that they need to "step things up." But, I completely disagree with the idea that all new Sigs are crap. As with many manufacturers these days (save a small few), it all depends on which model you buy. Do I long for the "old days" in terms of Sig Sauer? You bet. But, it is what it is. No sense in complaining about it.

    Back when I was trying to find out similar information on various revolvers I owned (S&W and Colt), I also was "asked" to pay for such background information. Its just one of those things. Sig Sauer is not exclusive to this issue.
    Last edited: May 20, 2010
  17. GoodKat

    GoodKat Well-Known Member

    You may be calling outside their hours, especially if you live in a different time zone.
  18. haha@ these people defending terrible customer service. Guess you have money to throw away, I don't. A company ought to back up their product for life, within reason. Let alone having to pay to find out the date their pistol was produced.

    You can keep giving them money, I won't. The W. German guns are better anyway. I'll pick up another Sig somewhere along the line I'm sure, but it won't be a new purchase. There's too many other companies more deserving of that sale right now.

    I don't need to call at any particular time, asx I said I left a message TWICE, TWO seperate occasions. Am I supposed to stalk this company to be treated like I matter? I didn't mention that I've spoken to Sig once before this - the guy I talked to didn't sound out of his teens and answered questions like where can I obtain an extractor for a W. German P220 with responses like "....uhhhhh" and "....ummmm" and I got off the phone more confused than I was when I called.

  19. Thought about it, believe me. But selling a gun I like, all things considered, because the company are a bunch of clowns doesn't change the fact that I like the gun. They make quality pistols...but even quality pistols can have issues. How the company handles that varies widely apparently.
  20. inSight-NEO

    inSight-NEO Well-Known Member

    Wrong. I do not defend terrible CS. I simply have not experienced it thus far (and yes, I have used Sig CS in the recent past). Also, once again, paying for "background" info on a gun is not exclusively a "Sig Sauer" issue.

    What bothers me is those who constantly complain about an isolated CS issue that, in affect, has absolutely nothing to do with the gun itself.

    I will also reiterate my opinion that I do agree with you on one point....Sigs are not the quality item they used to be. This upsets me as much as the next guy, trust me. However, they still make several high quality weapons...depending on the model that, for whatever reason, they tend to focus on the most.

    For instance, my wife "recently" bought a P239 which has seen over 1,000 rounds without one failure. It also looks as good as the day she bought it roughly 10 months ago. Also, my "recent" P220 needed a minor slide refinishing (out of the box). A 10 minute phone call (including waiting time), along with a typed letter and a 2 week turn around time, was all it took to get the problem solved. I have other stories, if you like.

    Hey, if you do not like Sig Sauer (for whatever the reason), fine man. I do understand. But, it does no good to chastise others who actually like these weapons and yes, have actually had decent results via their CS department. Fair enough?
    Last edited: May 20, 2010

Share This Page