1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

I quit

Discussion in 'Handguns: Holsters and Accessories' started by WALKERs210, Mar 17, 2014.

  1. WALKERs210

    WALKERs210 Well-Known Member

    I have always preferred the 1911 as my choice hand gun. Recently I picked up a new pistol and liked it enough that I decided to carry it instead of a revolver. Went into a local gun shop, bought a paddle type holster for the 1911 that uses passive retention. I had intended to get the one that required the use of button to release but didn't read close enough. Took it back but true to form I had lost the receipt, so just decided to get the correct model, but none available. Last Friday I ordered a shoulder holster that carries the pistol in a vertical position. It came in today and after a bit of adjustment I felt comfortable with it. Later on I had to make a trip to store for milk and bread so I put the rig on. While shopping in the store I moved and for some reason the pistol slipped past the tie down strap and the gun hit the floor just behind a lady. Her words were not so lady like. Re holstered the gun and came home, while putting the groceries away same thing happened again. I am to the point now I think I am going to attach a nylon cord to the lanyard clip on pistol and hang it around the neck.
  2. Noah

    Noah Well-Known Member

    Get a good kydex holster designed specifically for your gun. I bet I won't be the last to say this.
  3. JTQ

    JTQ Well-Known Member

    It doesn't have to be kydex, just get a good holster.

    Did your shoulder holster happen to by nylon? Just a guess.
  4. WALKERs210

    WALKERs210 Well-Known Member

    Should holster Nylon YES, first and last time. The other fits great, retains with no issue just had a brain fart for the shoulder holster. After all if one drops $800-900 dollars on a 1911 why would anyone skimp on a cheap holster. Kydex is now in the GOOGLE search as I post this.
  5. Valkman

    Valkman Well-Known Member

    Any good holster, kydex or leather, will do the job. I use a Sparks MV2 or a Galco Miami Classic 2 shoulder holster.
  6. JohnKSa

    JohnKSa Well-Known Member

    First rule of holsters.

    Get a holster made SPECIFICALLY for the particular type, size, model and barrel length of firearm you will be carrying. The way you can tell a holster is a poor choice is if it says on the package or in the description words to the effect: "Fits the following models/sizes of firearms" and follows those words with than just a SINGLE item.

    The larger and heavier the gun, the more important the rule is.
  7. WALKERs210

    WALKERs210 Well-Known Member

    Your abosoutly correct about getting the correct holster for your firearm from the start. The shoulder hoslter was a shot in the dark while I was waiting for local company to restock the ones I wanted But looks like the Kydex will be here before the local company will be able to restock.
  8. mljdeckard

    mljdeckard Well-Known Member

    Yeah. We all try the cheap ones. We all learn the hard way. You know what is more expensive than a good holster? Buying a cheap one and THEN buying a good one. :)

    I tell my carry students to plan on at least doubling the price of the gun with magazines, holsters, training, and carry ammo.
  9. mljdeckard

    mljdeckard Well-Known Member

    The basic Serpas aren't to expensive, and I just got a Versacarry in the mail today for my wife's XD. It's cheap, but it looks like it will be great.
  10. hartcreek

    hartcreek member

    You didnt state what brand shoulder rig you bought. I buy Michaels as in Uncle Mikes and I have never had a problem with fit and I use both vertical and horizontal models.
  11. rcmodel

    rcmodel Member in memoriam

    Good Grief!

    You went to the grocery store with a new holster that let your gun fall out?
    And you didn't test it out enough to even know it was a very remote possibility?

    Then came home and let it fall out and hit the floor again??
    Twice in the same day????

    Do you have to have a ND and shoot yourself or somebody else to figure out how to buy a safe holster that fits your gun??

    And safely carry it in public?????

    And not know when to toss it in the trash after the first time it hit the floor???

    Good heavens again!

  12. freepunk

    freepunk Member

    I'm pretty new around here but I have been lurking long enough to know the guy above me knows what he's talking about. Second everything rc said...why even take the chance a second time?
  13. JTQ

    JTQ Well-Known Member

    Here are some holster sources.

    Milt Sparks http://www.miltsparks.com

    Mitch Rosen http://www.mitchrosen.com

    Alessi http://www.alessigunholsters.com

    Ritchie http://www.ritchieholsters.com

    Your gun will not fall out of a holster from the above. If you don't want to wait on those above, you can find them at the following retailers.

    Brownell's http://www.brownells.com/shooting-accessories/holsters-belt-gear/holsters/index.htm

    Top Gun Supply http://www.topgunsupply.com/gun-holsters/

    Lightning Arms Sports http://www.lightningarms.com/products.htm
  14. kbbailey

    kbbailey Well-Known Member

    Man, that's beyond embarrassing Walkers210. I feel for you.
    I have used the Uncle Mikes brand in the past. I had one for my 7.5" Blackhawk. It was primarily used as a hunting rig. One day the plastc/rubber belt loop tore in two as I strapped on the rig. I tested my other Uncle Mikes holster and easily tore the belt loop in two with my fingers. Granted, they were both many years old....but still.
    Over the years I have had a few handguns hit the floor. It is never a good thing. The last was a loaded cap 'n ball.
  15. Mainsail

    Mainsail Well-Known Member

    You don't need to wait until it is stocked locally- that may never happen. My local big box sporting goods store stocks 198 holsters, for four gun models. There are dozens of websites that have a holster for your gun.
  16. 340PD

    340PD Well-Known Member

    Good lesson in now NOT to save money. Top name holsters and gunbelts are generally all worth what their makers charge for them.
  17. Robert

    Robert Moderator

    I carry my Gov't Model 1911 in an UBG iwb holster and have had no issues what so ever. Good holsters are worth every penny.
  18. WALKERs210

    WALKERs210 Well-Known Member

    The best horizontal carry rig for the 1911 was one that I gave to my son along with a Springfield. Still can't find out why the pistol slipped thru, pass, over, under or how ever it got past the retention strap. Already have a new one on order now.
  19. Drail

    Drail Well-Known Member

    Milt Sparks Summer Special. Nothing else even comes close. I tried carrying a 1911 in a Galco Miami rig and I hated it. IWB for me from now on. When you get your new shoulder rig spend some time and try as hard as you can to make the gun slip past the retention strap or make the strap pop open. If there is any doubt at all that it can - any - it will. Really try to make it fail. I have dropped a few guns in my early years and I won't take any chances on ever "dropping" one again. Ever. Really bad stuff can happen if you drop one in the wrong place.
  20. herrwalther

    herrwalther Well-Known Member

    That holster would certainly be going in the junk holster box or just the trash. Or maybe even return to get your money back. I have had some uncomfortable holsters over the years but only one has ever had a firearm slip out, and that was when I was hanging almost upside down.

    I carry all my firearms in a White hat holster and haven't had any issue with it.

Share This Page