1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Mossberg Plinkster Any Good?

Discussion in 'Rifle Country' started by jpwilly, Dec 8, 2007.

  1. jpwilly

    jpwilly Well-Known Member

    Are the Mossberg Plinksters any good for a low end rifle. Will they hold up to thousands upon thousands of rounds or is the design just that...cheap? I'm looking for a good buy in a 22lr rifle.
  2. TCB in TN

    TCB in TN Well-Known Member

    Bought one for my son to beat around with last Christmas, and he has run 10,000+ rounds through it and it has worked just fine. It is NOT the rifle that the lil Marlin 60 is, but it is a pretty decent little gun. I would hit the pawn shops pick up a used 60 for the same, or a little less money, or spend another $40 for a new 60 were it me, but if you want to open a NIB gun for $100 bucks then it is pretty much fine.
  3. EHCRain10

    EHCRain10 Well-Known Member

    Ive got one and it never has been extremely reliable even after extensive cleaning sessions
    it does shoot more reliably after the hard cleaning
    about 40% of the time the gun wont chamber another round after firinging and it has alot of light strikes on the primers
    maybe i just have a dud but id suggest you save for a better quality gun
  4. George Hill

    George Hill Well-Known Member

    No. Not even close. For 129 there are better ways to spend that gun money... such as throwing another $20 on it and get a Marlin. Done. Then you have a solid gun. Can't afford a new Marlin? Then buy a used Marlin for 75 bucks to 80 bucks... done deal.
  5. Clipper

    Clipper Well-Known Member

    My wife's plinkster has been flawless. It's extremely lightweight for a fully stocked .22, and is actually quite accurate. She loves it, and I like it a lot too...
  6. KONY

    KONY Well-Known Member

    Our plinkster just went through its first range session with my boy and performance was flawless. :cool:

    I believe these Plinksters are Brazilian copies of the Marlin 795. You just need to clean them well before your first shoot as it comes with lots of packing grease around the bolt when new from the factory. So much so that I doubt it would have run well if I went straight to the range from the store with it. :uhoh:
  7. Onmilo

    Onmilo Well-Known Member

    Yeah, I think you are right.
    The internals look about the same and the Marlin 795 is a clip fed version of the Model 60.
    Mossberg doesn't feature that pesky microgroove rifling either.

    I have to say I have never considered this particular design to be the end all of all other .22 rifle lines.
    Reliability can be iffy and a target grade rifle they are not, but as trainers and general purpose shooters they do just fine.
  8. ArmedBear

    ArmedBear Well-Known Member

    Uh, they do tend to be accurate .22's with that pesky stuff...

    Turner's in California has wood Marlin 60s new for $120 as part of their holiday sale. They sometimes sell 795's for $100.

    $129 for the Mossberg is too much. Marlin's guns tend to be top quality for whatever segment they're in, IMO, so for the same or similar price, I'd get a Marlin.
  9. Clipper

    Clipper Well-Known Member

    Who says they're $129.00?? I bought my wife's for $99.00 at Gander Mountain.
  10. jdc1244

    jdc1244 Well-Known Member

    No, they're junk, even at $99.

    Buy something else - anything else - used.
  11. KONY

    KONY Well-Known Member

    Dick's has sold the Plinksters for $80 as part of their Black Friday sale for the last two years.
  12. Clipper

    Clipper Well-Known Member

    Just for the record, jdc, tell us how the one you had was junk...
  13. john paul

    john paul Well-Known Member

    my buddy brought one over and we decided it was the same gun as the magtech .22 i bought for my wife years ago. (i told everyone it was love because i bought her a gun!) neither of us have ever had any problems with ours except maybe needing more time off to shoot them!
  14. PirateRadio

    PirateRadio Well-Known Member

    I shot my Plinkster for the first time today. For the most part, it worked very well. The gun itself functioned flawlessly. I have two clips, the one that came with it and an extra I bought with the gun. One of them kept jamming. It didn't seem to want to let go of the round. I think it's the one that came with the gun. Once I stopped using that clip everything worked great! I put about 100 rounds through it today without a single issue. The gun is a blast to shoot.
  15. ohioarmedneutrality

    ohioarmedneutrality Well-Known Member

    I got a Plinkster a little less than a year ago. Have had no problems with it except for wishing I had bought extra magazines so I could keep shooting it with less interruptions for reloading.

Share This Page