1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Our "new" reloading bench

Discussion in 'Handloading and Reloading' started by MarshallDodge, May 11, 2006.

  1. MarshallDodge

    MarshallDodge Well-Known Member

    I said 'our' because my wife helped out on the project. :D

    After moving last year I decided to rebuild my reloading bench. The old one was about 10 years old and had been moved four times so I felt it was time to upgrade.
    I used the original 2" solid core door and put a piece of 3/4" waferboard (or whatever it's called) on top letting overhang on the front 1.25". This was critical because the mounting holes on the Dillon 550B straddle the 2X6 underneath. The rear bolts on the Dillon go through the top and door, the front bolts just go through the top and seems very rigid. I finished the top with two coats of polyurethane that gave it a really cool look and mounted it to a base made from 4X4's and 1X4's.
    The cabinet is a wardrobe that the previous owners left so I cut it down and mounted it to the top with 1"X1" angle.

    The total cost was less than $50 because I had most of the stuff laying around.

    Here are some pictures:

    The Dillon on the left has not been permanently mounted yet. I am reserving that spot for the MEC's but I placed it there to make sure the cabinet would open and there is plenty of clearance.

  2. armoredman

    armoredman Well-Known Member

  3. robctwo

    robctwo Well-Known Member

    Very nice. I like the cabinet with the doors. I'll put up a picture of mine when I get it cleaned up enough to see. That might be in a few years. I put mine together this past year after a move as well. More of a shop bench look. It's in the shop.
  4. MarshallDodge

    MarshallDodge Well-Known Member

    It's hard to keep them clean and organized.
    Mine won't stay this clean for long. Have you ever read ABC's of reloading? Some of the pictures of his cluttered benches are a safety hazard.
  5. LAH

    LAH Well-Known Member

    Neat place there Marshall........Creeker

Share This Page