1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Pressure testing ?

Discussion in 'Handloading and Reloading' started by harley45, Jan 2, 2004.

  1. harley45

    harley45 Member

    Is there a lab out there that will allow a person to send handloads to be pressure tested? I've got some 9x23 loads I'd like to see about.
  2. Kamicosmos

    Kamicosmos Well-Known Member

    I know JD Jones's SKS Industries does pressure testing. No idea what the cost would be though.
  3. Clark

    Clark Well-Known Member

    You could use Dane's whoosy loads, or my hot loads for the 9x23mm, or something in between.
  4. harley45

    harley45 Member

    I'm usuing a load close to the ones you sent me but was just curious where I was at.

    WESHOOT2 Well-Known Member

    Yes, but for the life of me I don't immediately remember who; recent, too.
  6. sm

    sm member

  7. Clark

    Clark Well-Known Member

    CAUTION: The following post includes loading data beyond currently published maximums for this cartridge. USE AT YOUR OWN RISK. Neither the writer, The High Road, nor the staff of THR assume any liability for any damage or injury resulting from use of this information.


    1) Win data: 6.3 gr 231, 125 gr, 46,000 psi, 1300 fps

    2) Dane Burns Data: 9 gr 3N37, 125 gr. 1452 fps

    3) my data w/ Win brass, 1.36" in a Tokarev:
    a) 10 gr 3N37, 130 gr. primer falls out. poor velocity
    b) 16 gr Power Pistol, 158 gr. no pressure problems, highest velocity and best load
  8. harley45

    harley45 Member

    Webshoot2 let me know if you come up with it I e-mailed the above link so we'll see.
  9. JohnK

    JohnK Well-Known Member

  10. FireInTheHole

    FireInTheHole Well-Known Member

    Thanks for the link johnK.... I might have to try that sometime.
  11. Clark

    Clark Well-Known Member

    John K,
    Thanks, I was unable to retrieve that location in my worn out brain.

    So the head bottle washer at Handloads.Com is here in Western WA?
    I live on Mercer Island's tough South end where the rats are big and the dogs are mean.

    You are always so positive.... I want to switch to your brand of coffee.
  12. JohnK

    JohnK Well-Known Member

    Maybe that's the trick Clark - no coffee :) Whatever brand my parents drank when I was growing up was so foul I never developed a taste for the stuff.

    I'm just a tad NE of you, up near Duvall - but I work just across the water from Mercer Island in Bellevue.
  13. Clark

    Clark Well-Known Member

    I built a home on acrage [with windows that opened in the correct direction for shooting] North of Monroe and lived there in the 80's and 90's.

    When I would leave work in the Bellevue/Redmond area electronics companys, I would only be half way home when I went through Duvall.

    Just North of Duvall there is Cherry Creek pheasant release site. I have had some fun there:)
  14. kidcoltoutlaw

    kidcoltoutlaw Well-Known Member

    what is the cost

    for a pressure testing rig.i already have a p35 chronograph can i get an addon pressure tester for it,thanks,keith

Share This Page