1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

reload Data for 380ACP Bullseye, 100grfmj

Discussion in 'Handloading and Reloading' started by Didereaux, Feb 16, 2012.

  1. Didereaux

    Didereaux Member

    Hope this is not a repost. I recently did some test loads using Bullseye and Berry's 100gr FMJ. Here's the results
  2. Robert101

    Robert101 Well-Known Member

    Very nice. Thank you so much for the data. Good post on the .380.
  3. benzuncle

    benzuncle Well-Known Member

    I load 3.2gr of Bullseye behind 102gr Remington Golden Sabers. So I'm in "your ballpark" with the 100gr Berry's.
    Thanks for sharing your info.
  4. ssyoumans

    ssyoumans Well-Known Member

    2.8 gr of Bullseye is my standard load with the Berrys bullet, it gets me 782 fps out of my SIG P238. It functions down to 2.3gr of BE.

    I also shoot a lot of MBC 95gr LRN. 3.0gr does 829 fps

    Another good powder for 380 is W231. 3.5gr with the MBC 95gr does 883 fps. All of these loads are still under factory SD loads. It in line with 95gr FMJ factory loads.

    The SIG has a shorter barrel than your Bersa.
  5. fecmech

    fecmech Well-Known Member

    I load 3.6/BE and a Ranch Dog 100 gr RNFP in my Keltec P3AT, gives an even 900 fps.

Share This Page