1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Suppressed Kahr

Discussion in 'Handguns: Autoloaders' started by The Burnside Ninja, Nov 23, 2006.

  1. The Burnside Ninja

    The Burnside Ninja Well-Known Member

    Would it be easier to use a Kahr T-9 barrel in a P-9 for the extra length needed to thread for a suppressor? I believe that the T-9 barrel is 4 inches long and the P-9 is 3.5 inches long. I figured that I could simply swap the barrels. (thus giving the P-9 the extra 1/2 inch for threading) Or is it impossible to interchange Kahr barrels?
  2. Third_Rail

    Third_Rail Well-Known Member

    The folks over at Silencer Tests might know better than people here. :)
  3. Rem700SD

    Rem700SD Well-Known Member

    Wherever you intend on buying your silencer from, call them. They should be able to help you.
  4. HCfan

    HCfan Well-Known Member

    Look around, they probably make a threaded barrel for it already. If not then you can have one made.

    If you do buy a longer barrel and have it threaded, ensure that the person doing so knows what they are doing, I had one threaded and the guy messed up which caused the can to not line up correctly.

    I caught it before I fired it so all is well, but, just be careful.
  5. Hawaiian

    Hawaiian Well-Known Member

    I would ask Kahr if the barrels are interchangable. A glock 17 barrel won't work in a G19.

Share This Page