1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Trigger Question

Discussion in 'Gunsmithing and Repairs' started by rev579, Nov 5, 2012.

  1. rev579

    rev579 Active Member

    I am looking at tweaking my 03-A3, specifically the trigger. So much has been said about the Timney, and while there are a handful of others out there, I was looking for some feedback from you guys here.
    Thanks in advance.
  2. rcmodel

    rcmodel Member in memoriam

    Timney has a time-tested design used on Mausers and Springfields since the 1950's, and that is what I would go with if I were doing it.

  3. velocette

    velocette Well-Known Member

    I have a Dayton Traister on my '17 Enfield and it is excellent.

  4. murf

    murf Well-Known Member

    i put a timney in my 03 sporter. works great.

    be prepared to remove quite a bit of stock material.

  5. rev579

    rev579 Active Member

    On the timney triggers, 03-A3

    Featherweight, featherweight deluxe, or sportsman? What do you understand the practical difference to be?
  6. BBBBill

    BBBBill Well-Known Member

    Price, fitting, and safety. Sportsman is the basic unit with 2-4 pound adjustable trigger pull. Featherweight is a step up with more hand fitting done at the factory. 1&1/4 - 4 pound range. Featherweight deluxe is the top of the line and adds an integral safety (similar to a Remington 700 safety) to replace the original safety on the gun.
  7. rev579

    rev579 Active Member

    Thanks. $90 is the best price I've found, SWFA, but they are out of stock...
  8. BBBBill

    BBBBill Well-Known Member

    Brownells list them retail for - Sportsman $55
    Featherweight $80
    Featherweight Deluxe $100

    Trade price is less.
  9. rev579

    rev579 Active Member

    Midwest Gun has the FD for $90...

Share This Page