1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

walther ppk/s slide on a pp?

Discussion in 'Gunsmithing and Repairs' started by hopsond, Nov 27, 2007.

  1. hopsond

    hopsond New Member

    Nov 25, 2007
    I have a pp and I was wondering if a ppk or a ppks slide will adapt to my pistol. To my knowledge a ppks is a pp with a shorter barrel and ppk slide. just wondering?
  2. dfariswheel

    dfariswheel Mentor

    Dec 26, 2002
    The one time (MANY years ago) that I test-fitted a PPK slide to a PP frame, the slide fit right on, but was slightly looser, nor would it have surprised me if it had been a little tight.

    Take into account that this was a test using a Walther 1960's PP and a 1960's PPK both made in Europe.
    The results might be quite different with guns of different eras, and especially of different makes.
  3. Jim K

    Jim K Elder

    Dec 31, 2002
    The PPK and PPK/s slides should interchange and work, but the way they match up with the frame in the front is a bit different, so the looks might not be quite the same.


Share This Page