|
|||||||
| Welcome to THR |
| You are currently viewing our site as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have, access to post topics, communicate privately with other members (PM), respond to polls, and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please visit the help section. |
![]() |
|
|
Thread Tools |
|
|
#4476 |
|
Member
Join Date: September 15, 2012
Posts: 3
|
Thank you very much for the information. Well, I have 200 rounds of +p ammo. Guess I will keep an eye out for another .38.
|
|
|
|
|
#4477 |
|
Member
Join Date: December 27, 2011
Location: Knoxville, Tn
Posts: 3
|
Model 60-4
I recently had a local dealer order a Model 60 (assuming it would be a new .357). Although, what showed up was a new 60-4. Seems to be a pretty cool piece and I will likely be keeping it. He is not sure how it got mixed up.
Model 60-4 3" barrel .38 special 5 shot J-frame black front ramp and adjustable rear sights Serial - bfy6741 there is a S on the frame near the bottom of the grip I have seen alot of mixed information on when it was produced and how many were made. |
|
|
|
|
#4478 |
|
Member
Join Date: December 24, 2002
Posts: 3,375
|
mlcompound:
The Standard Catalog of S&W states that the Model 60-4 Chiefs Special Stainless Target began production 1990. It was replaced by the .357 Magnum Model 60-10 Chiefs Special Stainless Target & the Model 60-13 .38 Special Chiefs Special Stainless Target in 1996. These in turn were replaced by the .357 60-15 & .38 60-17 in 2001. The product code for a 1990 to 1995 target model should be 102298. Check your box to see if this matches. Guns in the serial range BFWxxxx shipped in February 1991, as this was within the production range for your gun I'm inclined to believe it was manufactured in late 1990 or early 1991. As to why it was not shipped till now? I've no idea.
__________________
If you're 6'4" 360, with the scraggly beard wearing a kilt, I think you can leave the guns at home. Just throw on your tartan, grab the nearest sledgehammer, and chase the bad guy down on foot while yelling "REMEMBER WILLIAM WALLACE!!!" If he stops before he hits the state line, splatter him - MGshaggy |
|
|
|
|
#4479 |
|
Member
Join Date: December 27, 2011
Location: Knoxville, Tn
Posts: 3
|
Thanks for the info. Very quick.
|
|
|
|
|
#4480 |
|
Member
Join Date: May 22, 2009
Posts: 13
|
DOB Required
Need DOB for a Smith & Wesson Model 67 that I have just purchased, unfired. It's just arrived from Germany.
It's serial number is 2K62924. 4" barrel, stainless steel adjustable sights. Thank you. |
|
|
|
|
#4481 |
|
Member
Join Date: December 24, 2002
Posts: 3,375
|
Flore55:
Your Model 67 Combat Masterpiece Stainless was manufactured in 1972. This makes it a first year of production gun.
__________________
If you're 6'4" 360, with the scraggly beard wearing a kilt, I think you can leave the guns at home. Just throw on your tartan, grab the nearest sledgehammer, and chase the bad guy down on foot while yelling "REMEMBER WILLIAM WALLACE!!!" If he stops before he hits the state line, splatter him - MGshaggy |
|
|
|
|
#4482 |
|
Member
Join Date: May 22, 2009
Posts: 13
|
Thanks Radagast - do you happen to know how many 67s were made in the first production run?
|
|
|
|
|
#4483 |
|
Member
Join Date: December 24, 2002
Posts: 3,375
|
Nope. The Model 67 shared its serial range with the Model 14, 15, 18, 19 & 66. The range is broken into several sectors over the years, with several sub ranges being used consecutively. Yours falls into the range 2K55997 to 2K99999 for that year. Whether that range was reserved only for the Model 67 I don't know.
The Model 67 no dash was produced from 1972 to 1977. I've no clue as to the total number. Perhaps someone in the S&W collectors association over at www.smith-wessonforum.com can answer your question.
__________________
If you're 6'4" 360, with the scraggly beard wearing a kilt, I think you can leave the guns at home. Just throw on your tartan, grab the nearest sledgehammer, and chase the bad guy down on foot while yelling "REMEMBER WILLIAM WALLACE!!!" If he stops before he hits the state line, splatter him - MGshaggy |
|
|
|
|
#4484 |
|
Member
Join Date: January 3, 2003
Location: AZ, Free at last!
Posts: 760
|
Howdy. Another k-frame for the collection.
19-4 Blue 2.25 inch barrel 26k8xxx Thanks,
__________________
How is that Democrat/Libertarian vote working out for you? Lov'in Arizona. Thanks all for your help. Airplane Pictures Last edited by pittspilot; September 23, 2012 at 10:45 PM. |
|
|
|
|
#4485 |
|
Member
Join Date: August 2, 2012
Location: Republic of Texas
Posts: 1
|
Hello All,
I recently purchased a 19-3 and am curious as to its particulars. a) caliber b) bbl length (from cylinder to muzzle) c) grips shape (round or square) d) number of shots/cylinder bores e) type of sights. f) serial number, and if there is a letter in front of or anywhere near the s/n on the bottom of the grip g) Model number if it is under the crane. That number, if it is the s/n, should come from the butt of the grip (or under the barrel or face of the cylinder). A) .357 B) 6" C) square wood D) 6 E) adjustable F) 7K89562 G) 19-3 Thanks! |
|
|
|
|
#4486 |
|
Member
Join Date: December 24, 2002
Posts: 3,375
|
PITTSPILOT:
Your Model 19-4 Combat Magnum was manufactured in 1978. stvnscott: Your Model 19-3 Combat Magnum was manufacture in 1976.
__________________
If you're 6'4" 360, with the scraggly beard wearing a kilt, I think you can leave the guns at home. Just throw on your tartan, grab the nearest sledgehammer, and chase the bad guy down on foot while yelling "REMEMBER WILLIAM WALLACE!!!" If he stops before he hits the state line, splatter him - MGshaggy |
|
|
|
|
#4487 |
|
Member
Join Date: January 3, 2003
Location: AZ, Free at last!
Posts: 760
|
Thanks,
__________________
How is that Democrat/Libertarian vote working out for you? Lov'in Arizona. Thanks all for your help. Airplane Pictures |
|
|
|
|
#4488 |
|
Member
Join Date: January 27, 2012
Location: Kentucky
Posts: 83
|
I picked up one last week that I like a lot...it is a very sweet shooter.
Chambered for 38 S&W Special 5 screw 4 lines of text on right side of frame ahead of the trigger guard. 6 shot 6 inch barrel Adjustable sights, target hammer & trigger Serial number on butt and bottom of barrel 1410XX with a K prefix I intend to use the gun for informal target shooting, plinking and perhaps a bit of small game hunting. It is certainly accurate enough. I'm guessing early '50's ? Thanks for all of your efforts in this thread. You guys are troopers! |
|
|
|
|
#4489 |
|
Member
Join Date: December 24, 2002
Posts: 3,375
|
WaywardSon:
Your K38 Target Masterpiece was manufactured in 1952. In 1957 model numbers were introduced and it became the Model 14. I would expect it to be very accurate - it was S&Ws premium target revolver of the time, intended to be used as part of a set with the .22lr K22 & .32 S&W Long K32 Target Masterpieces at the Camp Perry national shooting competitions. I wish you luck with it both on the range and in the field.
__________________
If you're 6'4" 360, with the scraggly beard wearing a kilt, I think you can leave the guns at home. Just throw on your tartan, grab the nearest sledgehammer, and chase the bad guy down on foot while yelling "REMEMBER WILLIAM WALLACE!!!" If he stops before he hits the state line, splatter him - MGshaggy |
|
|
|
|
#4490 |
|
Member
Join Date: July 28, 2012
Location: WI
Posts: 520
|
s&w 19-5.jpg S&W 19-5 ser is AVE365x 4"
6 shot 357mag thanks , and I wish I had a better pic for you but I'm not at home and if I could read my own wrighting I could give you the last diget of the ser#
__________________
NRA Life Member , NAHC Lifemember ,ret-Wi HunterSafty Insturctor and Handload Guru. USMC Proud Parent |
|
|
|
|
#4491 | |
|
Member
Join Date: January 27, 2012
Location: Kentucky
Posts: 83
|
Quote:
Looks like I need to find one in .32 now to complete the set:-) I have a K-22 Masterpiece that my father handed down to me on my 21st birthday. Wonderful guns. Thanks again............John |
|
|
|
|
|
#4492 |
|
Member
Join Date: January 27, 2012
Location: Kentucky
Posts: 83
|
Finding out the date of manufacture on the K-38 got me wondering about the K-22. So....I come to you again:-)
K-22 Masterpiece......Serial # K 636XX 5 Screw, target sights, hammer & trigger. 6" bbl. Thanks in advance! |
|
|
|
|
#4493 |
|
Member
Join Date: December 24, 2002
Posts: 3,375
|
Your K22 Target Masterpiece was manufactured in 1948. After 1957 it was designated the Model 17.
__________________
If you're 6'4" 360, with the scraggly beard wearing a kilt, I think you can leave the guns at home. Just throw on your tartan, grab the nearest sledgehammer, and chase the bad guy down on foot while yelling "REMEMBER WILLIAM WALLACE!!!" If he stops before he hits the state line, splatter him - MGshaggy |
|
|
|
|
#4494 |
|
Member
Join Date: December 24, 2002
Posts: 3,375
|
savanahsdad:
Your Model 19-5 Combat Magnum was manufactured in 1987.
__________________
If you're 6'4" 360, with the scraggly beard wearing a kilt, I think you can leave the guns at home. Just throw on your tartan, grab the nearest sledgehammer, and chase the bad guy down on foot while yelling "REMEMBER WILLIAM WALLACE!!!" If he stops before he hits the state line, splatter him - MGshaggy |
|
|
|
|
#4495 |
|
Member
Join Date: July 28, 2012
Location: WI
Posts: 520
|
thanks! I was told mid 80's I know it looks like it was made last week. not bad for a 25 year old gun
__________________
NRA Life Member , NAHC Lifemember ,ret-Wi HunterSafty Insturctor and Handload Guru. USMC Proud Parent |
|
|
|
|
#4496 |
|
Member
Join Date: January 6, 2011
Posts: 24
|
Model 31-1 DOB
a) .32 S&W Long
b) 2” c) square d) 6 e) fixed. f) H965XX g) 31-1
__________________
a cruce salus |
|
|
|
|
#4497 |
|
Member
Join Date: December 24, 2002
Posts: 3,375
|
pabner:
Your Model 31-1 .32 Regulation Police was manufactured between 1972 & 1976 in the serial range H600001 to H99999. My guesstimate in 1976, based on average production of roughly 12500 guns per year over that decade. The -1 refers to the gun being built on the J frame. The early Regulation Police used the smaller I & improved I frames.
__________________
If you're 6'4" 360, with the scraggly beard wearing a kilt, I think you can leave the guns at home. Just throw on your tartan, grab the nearest sledgehammer, and chase the bad guy down on foot while yelling "REMEMBER WILLIAM WALLACE!!!" If he stops before he hits the state line, splatter him - MGshaggy |
|
|
|
|
#4498 |
|
Member
Join Date: January 27, 2012
Location: Kentucky
Posts: 83
|
|
|
|
|
|
#4499 |
|
Member
Join Date: September 27, 2012
Posts: 1
|
need date of manuf
a friend has a model 58 s&w 41 mag 4" blue in very good condition
serial # 3257010 can you tell how old it is and its probable worth thank s |
|
|
|
|
#4500 |
|
Member
Join Date: December 24, 2002
Posts: 3,375
|
milseco@tds.net:
The Model 58 .41 Magnum Military & Police was produced from 1964 to 1977. Built on the large square butt N frame, it should have an S or a N prefix to the serial number. Your friend may have to remove the grips to see the serial number, it is sometimes, but not always, duplicated on the frame under the cylinder yoke. If the serial number is S257010 the it was manufactured in late 1964 or 1965 and is part of the original production run. I can't give you an idea of current value. In 2006 the Standard catalog of S&W gave a value of $450 in very good condition. I suggest you check out completed sales on online auction sites such as gunbroker & gunsamerica to get a feel for current values.
__________________
If you're 6'4" 360, with the scraggly beard wearing a kilt, I think you can leave the guns at home. Just throw on your tartan, grab the nearest sledgehammer, and chase the bad guy down on foot while yelling "REMEMBER WILLIAM WALLACE!!!" If he stops before he hits the state line, splatter him - MGshaggy |
|
|
![]() |
| Thread Tools | |
|
| IMPORTANT DISCLAIMER |
| Although The High Road has attempted to provide accurate information on the forum, The High Road assumes no responsibility for the accuracy of the information. All information is provided "as is" with all faults without warranty of any kind, either express or implied. Neither The High Road nor any of its directors, members, managers, employees, agents, vendors, or suppliers will be liable for any direct, indirect, general, bodily injury, compensatory, special, punitive, consequential, or incidental damages including, without limitation, lost profits or revenues, costs of replacement goods, loss or damage to data arising out of the use or inability to use this forum or any services associated with this forum, or damages from the use of or reliance on the information present on this forum, even if you have been advised of the possibility of such damages. |