Quantcast
Pay it Forward in Reloading - Page 27 - THR
THR  

Go Back   THR > Ammunition, Gear, and Firearm Help > Handloading and Reloading

Welcome to THR
You are currently viewing our site as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have, access to post topics, communicate privately with other members (PM), respond to polls, and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!


If you have any problems with the registration process or your account login, please visit the help section.

Reply
 
Thread Tools
Old May 30, 2013, 06:02 PM   #651
slowr1der
Member
 
 
Join Date: March 25, 2010
Posts: 892
Ok, for my PIF I have a Lee seater die for a .243 Winchester if anyone can use it. I think I posted this before.

I also have a Lyman 22-250 sizing die. The die is in good shape, but the piece that holds the decapping pin onto the rod needs to be replaced. This is just the little thin metal piece that screws onto the rod to hold the decapping pin. I'm not sure what it's called, but it's cracked so it doesn't screw on tight. Lyman may send you a replacement one of these for free, I'm not sure. I know the other companies would, but I've never called just because this was an extra die for me.

If anyone needs either of these, just let me know.
slowr1der is offline  
Old May 30, 2013, 06:09 PM   #652
blarby
Contributing Member
 
 
Join Date: February 25, 2011
Location: JC, Oregon
Posts: 4,442
A pack of 44 bullets goes out in the AM to paulsnap !

Roundballs it sounds like were recieved by PoorMan !

Gosh, I hate being so busy- I wish I could do more !
__________________
$25 a year to keep The High Road on line AND block adds? Bargain!
Become a contributing member today!
http://www.thehighroad.org/payments.php

The Reloading section Pay it Forward thread. Here
blarby is offline  
Old May 31, 2013, 04:22 PM   #653
Godsgunman
Member
 
 
Join Date: February 14, 2012
Location: Olathe, KS
Posts: 631
Looking for some .357 mag brass and/or small pistol primers. I do have 9mm brass I can trade or even some WWB 124 gr ammo.
Godsgunman is offline  
Old May 31, 2013, 04:37 PM   #654
ldlfh7
Member
 
 
Join Date: February 12, 2013
Location: Missouri
Posts: 518
Godsgunman -- I just sold my 357 and have a nice stash of brass I saved from it. I have 357 and 38 special. I would be very interested in trading for 9mm brass. Unfortunately I cannot help with the primers. PM me for details.
__________________
Take care of the land and it will take care of you.
ldlfh7 is offline  
Old June 7, 2013, 01:49 AM   #655
Bruno2
Member
 
 
Join Date: August 3, 2009
Location: Tulsa , Oklahoma
Posts: 876
OK, I have :

10 pcs of 30-06
4 pcs of 270

5 pcs of 25 ACP
65 pcs of 32 auto

11 pcs of 357 Sig
__________________
PBR Street Gang this is Almighty....Do you copy?
Bruno2 is offline  
Old June 7, 2013, 02:02 AM   #656
kyhunter
Member
 
 
Join Date: February 21, 2013
Location: western ky
Posts: 277
Bruno2 what headstamp is '06. id gladly take it off your hands
__________________
AR stands for ArmaLite. Not Assault Rifle.
kyhunter is offline  
Old June 9, 2013, 07:43 PM   #657
bds
Contributing Member
 
 
Join Date: January 10, 2010
Posts: 9,551
Paying forward .223 brass and bullets to mebe007. ETA 6/12 - 6/13.
bds is offline  
Old June 9, 2013, 08:47 PM   #658
swampcrawler
Member
 
 
Join Date: June 3, 2013
Posts: 344
This is verycool. Il play.

I have a good bit of once fired 9mm brass. At least a few hundred. I tumbled it but never deprimed it. I have a few other odds and ends but mostly juts a piece ot two of this or that. Let me know you need it and it's yours.

However, I have a 357 maximum barrel on the way for my contender. I found a little brass for sale here on the forum. But Im looking for some 358 180 gr pills for it. Can seem to find any in stock anywhere.
swampcrawler is offline  
Old June 9, 2013, 09:07 PM   #659
flgolfer29
Member
 
 
Join Date: September 3, 2010
Location: Panama City
Posts: 89
I could use some 9mm brass as I've just started loading 9mm lead.

Joe
flgolfer29 is offline  
Old June 9, 2013, 10:59 PM   #660
mac tm
Member
 
 
Join Date: July 6, 2011
Location: NE Iowa
Posts: 29
I am a new reloader looking for some 45 acp brass. Everyone at my range must reload too, the only brass to pick up is 22!
mac tm is offline  
Old June 9, 2013, 11:52 PM   #661
swampcrawler
Member
 
 
Join Date: June 3, 2013
Posts: 344
Sorry golfer, spoken for by kostyanj (had to go back and look at that like 3 times to make sure i spelled it right)
swampcrawler is offline  
Old June 10, 2013, 12:16 AM   #662
bds
Contributing Member
 
 
Join Date: January 10, 2010
Posts: 9,551
Paying it forward to RussellC 9mm brass. ETA 6/12 - 6/13.

flgolfer29, PM me your address for 9mm brass.

mac tm, PM me your address for 45ACP brass. I have both large and small primer pocket cases - Your choice.

PM's sent.


ole farmerbuck, thanks very much for the offer. I will let you know how the trip goes!

Last edited by bds; June 10, 2013 at 12:22 AM.
bds is offline  
Old June 10, 2013, 07:11 AM   #663
mac tm
Member
 
 
Join Date: July 6, 2011
Location: NE Iowa
Posts: 29
PM sent to bds, thank you.
I will dig through my small stash to see what I have to offer. I know there are some .40 s&w cases in there for which I have no gun.
mac tm is offline  
Old June 10, 2013, 07:14 AM   #664
flgolfer29
Member
 
 
Join Date: September 3, 2010
Location: Panama City
Posts: 89
PM send to bds for 9mm brass.

Thank you kindly!

Joe
flgolfer29 is offline  
Old June 10, 2013, 09:36 AM   #665
bds
Contributing Member
 
 
Join Date: January 10, 2010
Posts: 9,551
Paying it forward to mac tm large primer pocket 45ACP cases. ETA 6/13 - 6/14.

Paying it forward to flgolfer29 9mm cases. ETA 6/13 - 6/14.
bds is offline  
Old June 11, 2013, 12:23 PM   #666
Springfield0612
Member
 
 
Join Date: February 10, 2011
Location: Kingston, Wa
Posts: 119
Bruno2, I'd gladly take the .32 ACP off of your hands!

I'll put up:

9mm MAK 14ea
45 GAP 21 ea
44 Rem Mag 7 ea
Springfield0612 is offline  
Old June 11, 2013, 12:39 PM   #667
Spammy_H
Member
 
 
Join Date: December 29, 2010
Posts: 142
I have 2 boxes of Hornady 185 grain XTP .452 100 count bullets.

I need the following:

Berry's plated .400 180 grain FP

Berry's plated .452 230 grain RN

Small Pistol Primers
Large Pistol Primers

I know the primers are a long, long, long shot, but I need them, so I figured I'd ask to see if anyone in the Nashville area has any for FTF exchange.

I may be able to scare up some brass, but I'll put that in a separate post.
Spammy_H is offline  
Old June 11, 2013, 07:12 PM   #668
v8stang289
Member
 
 
Join Date: October 1, 2006
Location: Eastern NC
Posts: 402
Spammy_H I'll take one of the boxes of 185gn xtp's if they aren't already spoken for.
Thanks
__________________
NCSU 2008 Mathematics

"If everything seems under control, you're just not going fast enough" - Mario Andretti
v8stang289 is offline  
Old June 11, 2013, 07:56 PM   #669
Bruno2
Member
 
 
Join Date: August 3, 2009
Location: Tulsa , Oklahoma
Posts: 876
You got it Springfield! PM me your mailing info.
__________________
PBR Street Gang this is Almighty....Do you copy?
Bruno2 is offline  
Old June 11, 2013, 08:00 PM   #670
Bruno2
Member
 
 
Join Date: August 3, 2009
Location: Tulsa , Oklahoma
Posts: 876
Here is the updated list:
4 pcs of 270
5 pcs of 25 ACP
11 pcs of 357 Sig

I also found something in my bag like 35 Remington(2 pcs) if there is such a thing?
__________________
PBR Street Gang this is Almighty....Do you copy?
Bruno2 is offline  
Old June 13, 2013, 12:23 AM   #671
TenDriver
Member
 
 
Join Date: June 29, 2009
Location: Huntsville, AL
Posts: 1,047
Anyone need a #2 shell holder for a Lee Quick Trim gage? I have an extra you're welcome too.
TenDriver is offline  
Old June 13, 2013, 12:46 PM   #672
gonefishin1
Member
 
 
Join Date: February 15, 2013
Location: houston
Posts: 122
if there is anyone local to me spring tx area I have a few cci srp to help out someone in need not just to fill someones stockpile.... I also have some swagged bullets made from used 22 shells. I bought 200 and decided not to use them. they are sized to .226 so I didn't want to use them. if your not scared of them then they are yours.
gonefishin1 is offline  
Old June 13, 2013, 04:30 PM   #673
Rule3
Member
 
 
Join Date: January 26, 2010
Location: Florida
Posts: 2,357
I am not sure how this all works but I just started loading 30-30. I only have a few (30) cases and could use some more. I can not believe there is a shortage of 30/30 but I sure can not find any for sale??

I have lots of 38 special once fired brass (several headstamps) if anyone needs it or to trade or however this works
__________________
NRA- RSO
Rule3 is offline  
Old June 13, 2013, 06:45 PM   #674
jwrowland77
Member
 
 
Join Date: April 8, 2012
Location: Central Arkansas
Posts: 1,679
Not sure how this works but here's what I'm looking for in a bad way.

I need: Hornady LnL .308 Win modified case to use with my Hornady OAL gauge.

I have: Lyman primer pocket reamer (small)
jwrowland77 is offline  
Old June 13, 2013, 06:55 PM   #675
Havok7416
Contributing Member
 
 
Join Date: April 24, 2012
Location: SW Ohio
Posts: 1,305
Quote:
Originally Posted by Rule3 View Post
I am not sure how this all works but I just started loading 30-30. I only have a few (30) cases and could use some more. I can not believe there is a shortage of 30/30 but I sure can not find any for sale??

I have lots of 38 special once fired brass (several headstamps) if anyone needs it or to trade or however this works
I just scooped up some once fired brass today at the range. I will count it and get it back to you.
__________________
Sir we may be out of fuel!
What makes you think that?
We’ve lost engine #1... and engine #2 is no longer on fire!
Havok7416 is offline  
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:10 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
vBulletin Optimisation by vB Optimise.
This site, its contents, Shooting Reviews, and its contents are Copyright (c) 2010-2013 Firearms Forum, Inc.
IMPORTANT DISCLAIMER
Although The High Road has attempted to provide accurate information on the forum, The High Road assumes no responsibility for the accuracy of the information. All information is provided "as is" with all faults without warranty of any kind, either express or implied. Neither The High Road nor any of its directors, members, managers, employees, agents, vendors, or suppliers will be liable for any direct, indirect, general, bodily injury, compensatory, special, punitive, consequential, or incidental damages including, without limitation, lost profits or revenues, costs of replacement goods, loss or damage to data arising out of the use or inability to use this forum or any services associated with this forum, or damages from the use of or reliance on the information present on this forum, even if you have been advised of the possibility of such damages.