Quantcast
How does spreading work? - THR
THR  

Go Back   THR > Tools and Technologies > Shotguns

Welcome to THR
You are currently viewing our site as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have, access to post topics, communicate privately with other members (PM), respond to polls, and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!


If you have any problems with the registration process or your account login, please visit the help section.

Reply
 
Thread Tools
Old June 13, 2014, 09:04 PM   #1
Frostbite
Member
 
 
Join Date: November 18, 2013
Location: Québec
Posts: 124
How does spreading work?

Hello folks,

I was thinking about Fred Fuller's post in another thread about his buckshot load not spreading so much and I asked myself:

How does spreading work exactly?

What makes a brand spread faster than another?

Is there a correlation between speed, shot size, shot density, shot hardness, shotgun gauge, barrel length or other variables and spreading?

Well, all I know about it is that the choke makes a very real difference in shot spreading and pattern.

What about these other variables?

Thank you for your continuous efforts in educating me
__________________
Chasse au chevreuil... et tir à la cible pendant les cinquante et une autres semaines en prévision de la prochaine chasse au chevreuil!
Frostbite is offline  
Old June 13, 2014, 09:12 PM   #2
oneounceload
Member
 
 
Join Date: April 24, 2008
Location: Hot and Humid FL
Posts: 13,075
Choke constriction is the major factor in how a pattern works from a shotgun
__________________
"Support our troops; we'll need them to overthrow our government"

"When the people fear the government, there is tyranny. When the government fears the people, there is liberty."
Thomas Jefferson
oneounceload is offline  
Old June 13, 2014, 09:20 PM   #3
rule303
Member
 
 
Join Date: December 5, 2010
Location: MN
Posts: 1,127
Barrel length doesn't make any difference. Shot hardness and uniformity, as well as wad design can make a difference almost as much as choke constriction. Shot buffering, powder burn rate, and shell crimp can all make small changes in pattern. Generally, a larger the bore size will pattern more evenly given the same amount of shot.
Shooting different loads at a pattern board will tell you that when it comes to shotgun patterns, nothing is set in stone. Sometimes you will get a tighter pattern with a modified choke than a full, and some guns will throw a beautiful pattern with a load that is a mess fired from another gun of the same gauge and choke constriction.
__________________
01 FFL in East Central MN www.rockcreekoutdoors.net
rule303 is offline  
Old June 13, 2014, 09:26 PM   #4
Frostbite
Member
 
 
Join Date: November 18, 2013
Location: Québec
Posts: 124
Quote:
Sometimes you will get a tighter pattern with a modified choke than a full
With the same shotgun and with the same ammo??? Surprising!
__________________
Chasse au chevreuil... et tir à la cible pendant les cinquante et une autres semaines en prévision de la prochaine chasse au chevreuil!
Frostbite is offline  
Old June 13, 2014, 09:32 PM   #5
rcmodel
Member
 
 
Join Date: September 17, 2007
Location: Eastern KS
Posts: 48,040
There have been spreader loads in the past, and still are for hunting that included 3 or more card wads in the shot column.

Or, plastic wads with a post in the middle of the shot.

It causes the shot column to disperse sideways faster the normal after it comes out of the choke.

http://www.ballisticproducts.com/Dis.../products/743/

http://www.midwayusa.com/product/183...-1-8-oz-8-shot

http://www.cabelas.com/product/Herte...ls/1606220.uts

I'm not aware of any for buck-shot though.
Current thinking with buck-shot is the tighter the pattern, the better!

rc
__________________
Don't put all your eggs in one basket.
Or all your primers in a glass jar!
rcmodel is offline  
Old June 13, 2014, 09:39 PM   #6
Frostbite
Member
 
 
Join Date: November 18, 2013
Location: Québec
Posts: 124
Quote:
Current thinking with buck-shot is the tighter the pattern, the better!
I could not agree more with regards to my hunting. I would not want bullets everywhere in the good parts.

Is it the same for the HD users or is it perceived as the wider the better, as in less chance to miss under stress?
__________________
Chasse au chevreuil... et tir à la cible pendant les cinquante et une autres semaines en prévision de la prochaine chasse au chevreuil!
Frostbite is offline  
Old June 13, 2014, 10:03 PM   #7
Fred Fuller
Moderator
 
 
Join Date: March 26, 2004
Location: AL, NC
Posts: 19,238
Is it the same for the HD users or is it perceived as the wider the better, as in less chance to miss under stress?

There are about as many opinions regarding buckshot patterns as there are shotgun shooters. Maybe more: D.

I think everyone should work to get whatever kind of pattern they want, for the particular purpose or purposes they have in mind. Open, medium or tight, whatever a person's preference is, for whatever reason, they should look for the combination of internal barrel geometry and buckshot load that produces what they want as reliably as possible.

Choke is indeed one factor, but there are many, many more. An extended, polished forcing cone seems to help a lot to improve shotgun patterns with larger shot, in my experience and that of Dave McC, our esteemed late moderator here. Hans Vang made his name decades ago by overboring short open choked riot gun barrels and leaving in a few points of choke as original barrel diameter at the muzzle. Sometimes he put in ports too, but I don't think those helped with patterns. My gunsmith when I was a kid, Ralph Walker of Selma, AL, experimented a lot with what was called 'jug choking' (opening up the bore of a CYL bore barrel behind the muzzle for a short distance) and was an early adopter of choke tubes. A tight choke, however, will not necessarily guarantee tight patterns - often enough, the opposite is true as an overly tight choke will distort pellets as they pass through it, inducing spread.

In my experience the load matters a lot. A major factor in inducing spread in a buckshot pattern is pellets that get out of round in their trip down the bore. Some of them come out looking positively faceted, especially pellets made of dead soft lead with no hardening alloys added, or no plating with harder metals like copper or nickel. Lack of buffering (grex), lack of a protective shot collar or wad cup, and lack of a cushioning wad column to ease the blow of firing also are factors in avoiding pellet deformation in the short trip down the bore.

So - want open patterns? Shoot the inexpensive stuff with soft lead pellets and little or no pellet protection - Rio Royal, S&B etc.

Want medium patterns? Try any of the major manufacturer's standard buckshot loads - Federal, Remington, Fiocchi, Winchester etc.

Want tight patterns? Look for a "premium" load, preferably one with a FliteControl wad (see http://www.federalpremium.com/educat...tecontrol.aspx for more info). Premium loads are likely to have hard lead alloy pellets, plated with a harder metal like copper, protected with granulated plastic, shot cups or collars, and good, shock absorbing wad columns.

All the factors above are likely to influence patterns as described - but there are no guarantees. Shotgun patterns are as much magic as science sometimes, it seems. A dedicated shooter will try a variety of loads, chokes, barrels etc. to get what he or she wants out of a shotgun as far as patterns are concerned. And the only way to really tell, is at the patterning board.

See http://www.youtube.com/watch?v=_pIuUrjUIyQ#t=472

As far as using pattern spread to make up for lack of shooter ability ... well, it's always seemed to me that hitting was the SHOOTER'S responsibility, not the shotgun's. I often say that there are no hardware solutions to software problems. Others may disagree with that idea, as is their prerogative. I am a firm believer in taking advantage of the training that is widely available these days, from a number of well qualified professional instructors. That seems to be another point of contention with a lot of shooters as well.
__________________


MINDSET - SKILLSET - TOOLSET - IN THAT ORDER! -with props to COL John Boyd, USAF
http://globalguerrillas.typepad.com/john_boyd/
Fred Fuller is offline  
Old June 13, 2014, 11:03 PM   #8
Steve C
Member
 
 
Join Date: January 5, 2006
Posts: 4,218
The choke of the barrel is the major factor in shot spread.

Hard shot deforms less and holds a tighter pattern than shot that's less hard.

Lower the velocity, the tighter the pattern assuming equal components.

The components used in the shell assembly will effect the size of the pattern at distance significantly. Wads and/or buffering material are very important with a plastic wad or buffer material that encloses the shot and protects it from deformation giving tighter patterns than shells that don't have good wads and buffers. Federal fight control wads produce very tight patterns for example when compared to other shells with simple base wads that don't cushion the shot or keep it together.

Other factors have little influence on amount of spread.
Steve C is offline  
Old June 13, 2014, 11:17 PM   #9
Fred Fuller
Moderator
 
 
Join Date: March 26, 2004
Location: AL, NC
Posts: 19,238
The choke of the barrel is the major factor in shot spread.

Not any more... FliteControl technology has put an end to that.

It's as much of a myth as "You can't miss with a shotgun."
__________________


MINDSET - SKILLSET - TOOLSET - IN THAT ORDER! -with props to COL John Boyd, USAF
http://globalguerrillas.typepad.com/john_boyd/
Fred Fuller is offline  
Old June 14, 2014, 12:25 AM   #10
LeonCarr
Member
 
 
Join Date: March 20, 2003
Location: DFW Texas
Posts: 3,277
Hey Frostbite,

Here is some testing I have done on Buckshot, and the commentary included might help you understand what makes buckshot spread or not spread. Choke is a factor, but not the whole story:

http://www.thehighroad.org/showthrea...t=LeonCarr%27s

http://www.thehighroad.org/showthrea...t=LeonCarr%27s

Check it out!

Just my .02,
LeonCarr
__________________
"If you attempt to leave, or play any games, I will TAZER you and watch Supernanny while you drool into the carpet." - Agent Coulson to Tony Stark in Iron Man 2
LeonCarr is offline  
Old June 14, 2014, 05:10 AM   #11
Pete D.
Member
 
 
Join Date: September 13, 2010
Posts: 1,589
spread

Quote:
I was thinking about Fred Fuller's post in another thread about his buckshot load not spreading so much and I asked myself:

How does spreading work exactly?

What makes a brand spread faster than another?

Is there a correlation between speed, shot size, shot density, shot hardness, shotgun gauge, barrel length or other variables and spreading?

Well, all I know about it is that the choke makes a very real difference in shot spreading and pattern.

What about these other variables?

Thank you for your continuous efforts in educating me
__________________
All of those questions were answered by Bob Brister in his classic study of shotguns and patterns: "Shotgunning: The Art and Science"
It is true, however, that more modern technigues at the factory have improved the uniformity and efficiency of some types of shells.
Regardless, ya still need to pattern your gun.
Pete
Pete D. is offline  
Old June 14, 2014, 01:32 PM   #12
Fred Fuller
Moderator
 
 
Join Date: March 26, 2004
Location: AL, NC
Posts: 19,238
Regardless, ya still need to pattern your gun.
Pete


Pete wins the Intarnetz...
__________________


MINDSET - SKILLSET - TOOLSET - IN THAT ORDER! -with props to COL John Boyd, USAF
http://globalguerrillas.typepad.com/john_boyd/
Fred Fuller is offline  
Old June 14, 2014, 06:05 PM   #13
Frostbite
Member
 
 
Join Date: November 18, 2013
Location: Québec
Posts: 124
Thank you gentlemen for taking the time to share your knowledge and answer these questions which must sometimes seem basic to you, judging by the quality of many of the answers posted

Some of you provided good explanations on a technical level, some of you provided useful guidance in ammo selection. That is exactly what I was after. I like both to understand why and what to look for.

I would not have suspected that much difference between different ammo such as what has been measured by LeonCarr's experimentation. I also found it interesting both because many different loads have been tested and because his test shotgun is in some ways similar to mine: short barreled and cylinder choked.

Shotgunning: The Art and Science, by Bob Brister, will appear on my Summer (understand leisure) reading list. Not sure if I will find it over here. It might be wise to check for it next time I visit the States. I will also check the web, we never know what can be found out there

As previously posted in another thread, I have already experimented with three different buckshot loads. Sadly, I only recorded the fun associated with that painful shooting session, which was immediately preceded by twenty slugs in less than half an hour. Testing will continue. Measuring will be more precise. Number of shots fired shall be smaller for each kind of ammo. No way I will shoot twenty slugs in a row before I get to the buckshot testing ever again. I am not particularly shoulder sensitive, but there are limits to what I can enjoy

I will keep in mind the quick guide Fred Fuller provided for opened, medium and tight patterns associated with the kind of ammo. It gives a good idea what to look for when at the ammo counter: premium stuff in my case. Do you think the reduced recoil stuff has enough punch for deer? Visiting Federal's website proved useful in understanding the mechanic of their FliteControl ammo. Thanks for the link. Just sad it seems I will have to go the more expensive route; LeonCarr's experimentation also pointed that way.

I had just ordered a bunch of Challenger 2¾" 00 buckshot. Federal will have to wait for more ammo money. Can't wait to see how it patterns out of my shotgun! Does any of you have any experience with those? Did they perform well? Did they spread a lot?
__________________
Chasse au chevreuil... et tir à la cible pendant les cinquante et une autres semaines en prévision de la prochaine chasse au chevreuil!
Frostbite is offline  
Old June 15, 2014, 06:31 AM   #14
Pete D.
Member
 
 
Join Date: September 13, 2010
Posts: 1,589
books

Frostbite: You are in Quebec? You should have no trouble finding Brister's book.
Amazon sells it.
Also...more reading...John Brindle's "Shotgun Shooting: Techniques and Technology" is a worthwhile addition to your bookshelf.
Note: recent technology has changed so much that some of what is in these books has is now "old info".....not wrong info but supplanted by change. Flite control is an example. (Most shotshells available today, however, are not "flite controlled")
Pete
Pete D. is offline  
Old June 15, 2014, 09:37 AM   #15
SeekHer
Member
 
 
Join Date: September 23, 2005
Location: Manitoba, Canada
Posts: 351
Quote:
Originally Posted by Fred Fuller View Post
The choke of the barrel is the major factor in shot spread.

Not any more... FliteControl technology has put an end to that.

It's as much of a myth as "You can't miss with a shotgun."
Except that the pattern will be different at the same distance--even with Flight Control-- when coming out of a IC, Mod or a Full choke barrel...So choke still dictates spread.
__________________
When the human race dies out it will be because it was brainwashed to be so totally, completely, utterly safe that it no longer dared to keep on living...
Support the JPFO -- Jews For The Preservation Of Firearms Ownership's
program GIVE THE BATF THE BOOT
SeekHer is offline  
Old June 15, 2014, 09:53 AM   #16
SeekHer
Member
 
 
Join Date: September 23, 2005
Location: Manitoba, Canada
Posts: 351
Try anything by Michael McIntosh
Shotguns & Shooting
More Shotguns & Shooting
Shotguns and Shooting Three
The Gun Review Book
Shotgun Technicana


Breaking Clays and
The Instinctive Shot: The Practical Guide to Modern Wing Shooting both by Chris Batha

The Shotgun: A Social History by Macdonald Hastings

Really old info but classics none the same.
Shotguns by Keith by Elmer Keith

Shotgun Stuff and
The Double Shotgun both by Don Zutz
__________________
When the human race dies out it will be because it was brainwashed to be so totally, completely, utterly safe that it no longer dared to keep on living...
Support the JPFO -- Jews For The Preservation Of Firearms Ownership's
program GIVE THE BATF THE BOOT
SeekHer is offline  
Old June 15, 2014, 12:37 PM   #17
Fred Fuller
Moderator
 
 
Join Date: March 26, 2004
Location: AL, NC
Posts: 19,238
The assumption has historically been that a tight choke is necessary for tighter patterns.

That is the myth FliteControl has pretty much put to rest.

it is certainly true that in some cases if not many cases, using tighter chokes with FliteControl will cause more open patterns rather than tighter patterns.

And regardless of any of the above generalizations, the one certainty is that you must pattern your gun and load to have any idea what it will do at a given range.
__________________


MINDSET - SKILLSET - TOOLSET - IN THAT ORDER! -with props to COL John Boyd, USAF
http://globalguerrillas.typepad.com/john_boyd/
Fred Fuller is offline  
Old June 15, 2014, 08:05 PM   #18
Frostbite
Member
 
 
Join Date: November 18, 2013
Location: Québec
Posts: 124
Thank you guys for the reading advices. I will search for these books; I like to learn. Often times, one does not know where to start when entering a new field of knowledge. I will take it that these books are such a place.

Fred Fuller seems sold to the idea of the FliteControl. Given the results of LeonCarr's experiments, I can easily understand why. rcmodel mentioned that the spreading loads were mostly used in a hunting context.

I do no think that a spreading load for white tail deer hunting is the preferable choice, because I fear some meat would be lost because of it. I would like to know what you think of the FliteControl load for that particular hunt. Would it be a good choice in your opinion?
__________________
Chasse au chevreuil... et tir à la cible pendant les cinquante et une autres semaines en prévision de la prochaine chasse au chevreuil!
Frostbite is offline  
Old June 15, 2014, 08:29 PM   #19
rcmodel
Member
 
 
Join Date: September 17, 2007
Location: Eastern KS
Posts: 48,040
For any deer hunting with buckshot, the tighter the pattern the better!

Assume you have 9 00 buckshot in a load.

Would you rather hit the deer in the chest kill zone with all 9 of them?

Or one in the leg, one in the chest, one in the neck skin, one in the guts, and the other five complete misses?

rc
__________________
Don't put all your eggs in one basket.
Or all your primers in a glass jar!
rcmodel is offline  
Old June 15, 2014, 10:50 PM   #20
SeekHer
Member
 
 
Join Date: September 23, 2005
Location: Manitoba, Canada
Posts: 351
Well, actually spreader loads were designed to open up when fired from tight choked guns before the advent of screw-in chokes.

Shooting doves with a M/F double didn't result in many kills compared to an IC/M but the only way to increase spread was either an expensive, permanent, gunsmith modification (either boring out or installing a Vari-Choke)or spreader shells.

For deer hunting, you're far better off with slugs.
__________________
When the human race dies out it will be because it was brainwashed to be so totally, completely, utterly safe that it no longer dared to keep on living...
Support the JPFO -- Jews For The Preservation Of Firearms Ownership's
program GIVE THE BATF THE BOOT
SeekHer is offline  
Old June 16, 2014, 08:57 AM   #21
lemaymiami
Member
 
 
Join Date: October 15, 2010
Posts: 962
All of my shotgun experience (98%) was with police shotguns...standard rack grade riot configured Mossbergs and Remingtons (for "riot configured", read bead sight, four round tube, barrel length between 18 and 20", with a cylinder or improved cylinder barrel, using Winchester or Remington standard 2 3/4" nine pellet 00buck ammo....). The exercise/demonstration that stuck with me throughout the years was a very simple patterning exercise that anyone can duplicate...

Set up three or four simple paper targets - all at the same height, the first at 3 yards, the second at 7, the next at 15, the last at 20yards -all in a row, one after the other. If you can manage to level out so that your weapon is parallel to the ground, then fire a single shot with buck you'll end up with a very graphic and usable set of guidelines that show clearly just how important distance from the target is with a shotgun loaded with buckshot.... You'll also see demonstrated just how much a charge of buck will rise a bit as it goes downrange, those first 20 yards...

We pretty much expected that buckshot to disperse about one inch per yard (or meter if you prefer) from the muzzle. At seven yards the pattern was predictably right at seven inches... This whole business of how much a given load will disperse downrange is critical in the real world since it governs how effective you can be in an armed conflct at close quarters...

If it were me, I'd want to do this with each and every shotgun I had access to and I'd want to check out each and every ammo type that I'd be using. If you know exactly how your popper will perform when needed it really builds confidence that you can use it effectively on the one day when everything is at stake....

To reach the next level you'll want to learn how to skip shoot (bounce your shot off of a surface before it hits your target) - but that's another topic entirely....
lemaymiami is offline  
Old June 20, 2014, 09:13 PM   #22
Pete D.
Member
 
 
Join Date: September 13, 2010
Posts: 1,589
pattern

Quote:
We pretty much expected that buckshot to disperse about one inch per yard (or meter if you prefer) from the muzzle. At seven yards the pattern was predictably right at seven inches
That is pretty much a classic formula. One inch per yard from a FC, two inches per yard from an Cyl choke.
Pete D. is offline  
Old June 21, 2014, 10:59 AM   #23
Fred Fuller
Moderator
 
 
Join Date: March 26, 2004
Location: AL, NC
Posts: 19,238
That is pretty much a classic formula. One inch per yard from a FC, two inches per yard from an Cyl choke.

That WAS a classic formula.

My current house gun will print patterns of about 4" (four inches) at 25 yards (75 feet) out of a factory 18" CYL bore 870 shotgun barrel with Federal LE 127 00 with FliteControl.

When FliteControl first appeared, some gun scribes complained that its patterns out of off-the-rack riot guns were TOO tight... no such thing, IMO, but YMMV.
__________________


MINDSET - SKILLSET - TOOLSET - IN THAT ORDER! -with props to COL John Boyd, USAF
http://globalguerrillas.typepad.com/john_boyd/
Fred Fuller is offline  
Old June 22, 2014, 06:25 AM   #24
Pete D.
Member
 
 
Join Date: September 13, 2010
Posts: 1,589
now

Fred: I follow your point about Flite Control technology. Such a pattern at 25 yards is remarkable and for that use desirable....

but about pattern spread in general...
Quote:
That WAS a classic formula.
Still is for most loads.....most shotshells are not Flite controlled. There are many instances where a small pattern such as you describe would be a handicap. Ruffed Grouse in the huckleberries comes to mind.....a hard right on station five is another.
Pete
Pete D. is offline  
Old June 22, 2014, 01:34 PM   #25
Fred Fuller
Moderator
 
 
Join Date: March 26, 2004
Location: AL, NC
Posts: 19,238
There are many instances where a small pattern such as you describe would be a handicap.

Not with a CYL choke barrel ... ... all ya gotta do to open things up is swap shells. Not even any need to spin choke tubes in and out.

I do love tight patterns, but there's a stash of S&B 00 buck here too, in case a 'to whom it may concern' situation arises. Everyone always says versatility is the shotgun's strong point ... no need to fight that particular shibboleth when you can use it to your advantage!

And by the way, I have two or three 18.5" rifle sighted 870 factory barrels with fixed MOD chokes here also, in case FliteControl gets hard to find. There are several buck loads that do well for me out of a MOD barrel. I used one of these at my last shotgun class, where we were shooting 'negative' targets (cardboard IPSC silhouettes with an 8" hole cut out of the center). It was easy to slip birdshot and buckshot patterns through the hole from the firing line and not rag out the cardboard, unless you flat out missed the hole.

See http://www.midwayusa.com/product/921...ProductFinding
__________________


MINDSET - SKILLSET - TOOLSET - IN THAT ORDER! -with props to COL John Boyd, USAF
http://globalguerrillas.typepad.com/john_boyd/
Fred Fuller is offline  
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:06 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
vBulletin Optimisation by vB Optimise.
This site, its contents, Shooting Reviews, and its contents are Copyright (c) 2010-2013 Firearms Forum, Inc.
IMPORTANT DISCLAIMER
Although The High Road has attempted to provide accurate information on the forum, The High Road assumes no responsibility for the accuracy of the information. All information is provided "as is" with all faults without warranty of any kind, either express or implied. Neither The High Road nor any of its directors, members, managers, employees, agents, vendors, or suppliers will be liable for any direct, indirect, general, bodily injury, compensatory, special, punitive, consequential, or incidental damages including, without limitation, lost profits or revenues, costs of replacement goods, loss or damage to data arising out of the use or inability to use this forum or any services associated with this forum, or damages from the use of or reliance on the information present on this forum, even if you have been advised of the possibility of such damages.