Tell me more about Volunteer Arms' Commando Mk.V - Tommygun copy

[AirPower]

Just bought this used Tommy gun copy, it's made by Volunteer Arms, Commando Mk.V. It's not exactly like a Tommy gun unfortunately, especially the lower being made of plastic. What's it worth? It came with 3 welded together stick mags. Anything I should be aware of, and is there someone making a more accurate Tommy gun clone?

[Bartholomew Roberts]

Auto Ordnance/Kahr Arms makes a much better Thompson clone. I don't have much familiarity with the particular clone you mention, so I'll refrain from commenting.

[Sylvilagus Aquaticus]

I had a friend who had one 20 years ago. It had a serious F-T-F problem with all ammo tried. It was soon sold off to someone more gullible than he.

Regards,
Rabbit.

[Dr.Rob]

Ah yes sold with the tagline "Now You Can Have An Attitude Problem AND Back It Up."

Nowhere near as 'engineered' as a semi-auto Thompson clone, dubious metallurgy, etc.

In fact I haven't SEEN one for sale outside of "Soldier of Fortune" 20 years ago.

I'd pass on this one.

[Andrew Wyatt]

The one I used to have fed any ball you threw at it without a hitch. it uses Grease gun magazines.

[MechAg94]

Auto Ordnance/Kahr Arms makes a much better Thompson clone. I don't have much familiarity with the particular clone you mention, so I'll refrain from commenting.

What Bartholomew said. I saw their booth at the NRA convention.
http://www.auto-ordnance.com/

[saltydog]

The one I used to have fed any ball you threw at it without a hitch. it uses Grease gun magazines.

When I had my FFL back in the early 80's I use to sell a few of them because of their cheap price. I think dealer price was about $135.00 ea. back then and I would buy 3 at a time for re-sale. I bought the 45 cal. models only and I am not fimilar with the 9mm version. I have test fired them and found that the ones I had for customers would feed ok and yes they had plastic lowers and internals. My biggest gripe was the burr's and sharp edges on the trigger. Your finger ended up getting cut most of the time. They looked OK and some came with all wood except for the pistol grip. They were a far cry in quality from the real Federal Ordenance Thompson but like I said, what do you want in a carbine for $160.00 over the counter back then. There wasn't a whole lot to choose from back then with that price in mind.

[anapex]

My Dad picked one up used. It's been awhile since I've shot his but the only thing I can remember about it was a HEAVY trigger pull. Worse then my Taurus PT-111.

[thereisnospoon]

Airpower,

I sent you a PM.

I have a Vol Arms Mark III that I picked up REAL cheap due to condition, as I like to tinker, I figured what the heck.

I have found there are VERY limited resources for this weapon system, so if you decide you want to pass this item onto "someone more gulible" as someone put it, I may be interested.

Call me a sucker, but I'm optomistic enough to think that anything can be made to work better with enough grinding from a dremel tool

If you decide to keep it, I have a manual and some other info I could share with you.

Check out this page:

http://www.gunboards.com/forums/topi...TOPIC_ID=17579



Spoon

[telewinz]

I've had my nickel plated "Commando" .45 for quite a while now. I love IT! Shoots my lead reloads (RN & SWC) without a hitch. NO recoil so even a small women can bast away (had "volunteer" try it last fall ) Much lighter and more reliable than my friends Kahr "Thompson" at less than half the price (I finally opted for the "Commando" but looked REAL hard at the Auto Ordnance and Kahr). Great rapid fire at 25 and 50 yards but hits way low at 75 yards. A real fun, reliable blaster!

[Carl N. Brown]

These were made about 90 miles from where I live and I looked
at them often in the 1970s and accumulated some factory brochures.

Volunteer Enterprises made tommy-gun look-alike stocks for the
M1 carbine as Commando Mark I with fixed shoulder stock and
Command Mark II no shoulder stock, and Commando Mark IV with
detachable M1928-style buttstock.

Their sheet metal clones of the tommy gun included Commando
Mark III using M3 grease gun clips, Mark V using Thompson clips,
Mark 9 in 9mm and an improved Mark V called Mark 45.
Notice the bolt handle is on the LEFT side of the receiver.
Weight was about eight pounds (compared to eleven for the Thompson).
Volunteers Enterprises sold magazines in five-shot, thirty-shot
and three thirties welded in a Y configuration.

Local Police bought these in the aftermath of the 1968 GCA because
they could no longer get full-autos. A county deputy let my son shoot
his Mark III gun at my uncle's farm. Unfortunately, the Commandos
also showed up in the Washington County Sheriff's display of
confiscated weapons along with the usual sawn-off shotguns,
sawn-off rifles, zip guns and RG10s. Moonshiners and drug dealers
favored them to impress (deter) potential robbers.

I have seen Commandos at local gun shows prices between $300
and $800. $300 seems reasonable.

[eggbert30]

Any one know if the barrel threads match the auto ordinance (GI) spec threads and if not any idea what the threads are? Looking at changing a barrel.
Thanks