Show us a picture of your reloading bench - Page 90

RustyFN · September 14, 2011, 05:23 PM

I have an addition to my bench.

aerod1 · September 14, 2011, 06:33 PM

No billiard ball yet?

RustyFN · September 14, 2011, 10:49 PM

Not yet.

floydster · September 15, 2011, 11:58 AM

Well, Rusty, you finally went and did it

Hope you don't retire the Lee Turret--I still use mine quite a bit even tho I have the Hornady LNL.

Good on ya Mate

dsm · September 15, 2011, 07:28 PM

Well...I just moved and need to frame in a new reloading room. Here is my dinky temporary set up, lol.

I need to add a sub panel to add basement circuits. I hope to get a new room framed in over the winter.

flashhole · September 15, 2011, 07:52 PM

Look at all that room for expansion. I love it.

Rollis R. Karvellis · September 15, 2011, 10:01 PM

Seams to me that room is a good start.

1in9twist · September 16, 2011, 02:40 PM

OOhhh.......A nice blank canvas!

red-demon652 · September 17, 2011, 01:15 AM

Ok heres my stuff. Lol the hole lot of it.

RustyFN · September 17, 2011, 11:02 AM

Quote:

Well, Rusty, you finally went and did it
Hope you don't retire the Lee Turret--I still use mine quite a bit even tho I have the Hornady LNL.

Good on ya Mate

Yes finally did it. The LCT won't be going anywhere.

dsm nice looking space, lots of possibilities.

jotto · September 17, 2011, 01:43 PM

Here is my recently completed, almost done reloading area. Last stage to complete is to the the press and related equipment bolted down and get to work this winter.

Brand new to reloading so this is a work in progress.

Canuc Shooter · September 18, 2011, 04:07 PM

Looks like a real good start, I've been reloading for 23 years, and I'm still using 550 mounted on a strong mount,"C" clamped to a B&D workmate. Would love to have the room.

jim243 · September 18, 2011, 11:16 PM

drfroglegs · September 21, 2011, 10:22 AM

I wish I had the space of some of you guys! My wife gave me a 2'x4' area in the garage! Maybe one day when I get a house of my own... one day...

Dueling1911s · September 21, 2011, 01:57 PM

VaGunNut · September 21, 2011, 09:07 PM

Hope your still not using the powder out of those antique metal containers.......lol

Rollis R. Karvellis · September 21, 2011, 10:05 PM

Those metal containers are pretty modern, there are guy's here using powder that came in coffee type bags.

Ronno · September 22, 2011, 02:55 PM

Rollie....
Let me know when you are in the hometown area...

Rollis R. Karvellis · September 22, 2011, 06:05 PM

Probably not till mid Oct. Will P.M., or FB. The Mod's will yell if we drift to much on this thread.

Cdstang · September 22, 2011, 07:15 PM

Olympus · September 23, 2011, 08:17 PM

J_McLeod · September 27, 2011, 03:36 PM

I added a Lee Pro 1000 to my collection, so I had to rearrange my bench. Got a bigger piece of cull plywood from Lowe's and mounted the perfect powder measure to a small piece of plywood that I clamp to the bench so I can move it between presses.

GLShooter · September 27, 2011, 06:26 PM

I've seen theater in the round but never reloading on the square!!

Looks like you have got it down to a workable minimalist approach. Good job there.

Greg

spcrobbins · September 28, 2011, 09:25 AM

LAH,

Is that a Lyman All-American Turret Press I see?

GLShooter · September 28, 2011, 11:52 AM

I looked at his pics and that is most certainly a Lyman AA. An Oldie but a Goodie!! I depend on my pair for lots of good loads.

Greg

September 14, 2011, 05:23 PM	#2226
RustyFN Member Join Date: July 5, 2006 Location: West Virginia Posts: 3,106	I have an addition to my bench. __________________ I don't ever remember being absent minded.

September 14, 2011, 06:33 PM	#2227
aerod1 Member Join Date: February 26, 2003 Location: Garland, TX Posts: 950	No billiard ball yet? __________________ NRA Life Member TSRA Life Member C&R, 03 FFL, Texas CHL Recreational Reloader

September 14, 2011, 10:49 PM	#2228
RustyFN Member Join Date: July 5, 2006 Location: West Virginia Posts: 3,106	Not yet. __________________ I don't ever remember being absent minded.

September 15, 2011, 11:58 AM	#2229
floydster Member Join Date: January 13, 2008 Location: Central, Mn. Posts: 1,434	Well, Rusty, you finally went and did it Hope you don't retire the Lee Turret--I still use mine quite a bit even tho I have the Hornady LNL. Good on ya Mate __________________ Smokeyloads

September 15, 2011, 07:52 PM	#2231
flashhole Member Join Date: May 2, 2005 Location: Owego, NY Posts: 842	Look at all that room for expansion. I love it. Last edited by flashhole; September 17, 2011 at 11:55 AM.

September 15, 2011, 10:01 PM	#2232
Rollis R. Karvellis Member Join Date: February 16, 2007 Location: S.E. OHIO Posts: 706	Seams to me that room is a good start. __________________ Honest officer this is my only log book. The only use of a handgun is to get you from where you are, to where your rifle is. Rome is burning............pass the popcorn.

September 16, 2011, 02:40 PM	#2233
1in9twist Member Join Date: January 8, 2011 Posts: 67	OOhhh.......A nice blank canvas! __________________ Reloading should be enjoyable. www.inlinefabrication.com

September 17, 2011, 01:43 PM	#2236
jotto Member Join Date: May 6, 2006 Location: NW Indiana Posts: 77	Here is my recently completed, almost done reloading area. Last stage to complete is to the the press and related equipment bolted down and get to work this winter. Brand new to reloading so this is a work in progress. __________________ Bco. 1-8Cav

September 18, 2011, 04:07 PM	#2237
Canuc Shooter Member Join Date: December 13, 2007 Location: North of the 49th Posts: 139	Looks like a real good start, I've been reloading for 23 years, and I'm still using 550 mounted on a strong mount,"C" clamped to a B&D workmate. Would love to have the room.

September 18, 2011, 11:16 PM	#2238
jim243 Member Join Date: September 11, 2009 Posts: 1,523

September 21, 2011, 10:22 AM	#2239
drfroglegs Member Join Date: September 21, 2011 Posts: 11	Built from the ground up! I wish I had the space of some of you guys! My wife gave me a 2'x4' area in the garage! Maybe one day when I get a house of my own... one day...

September 21, 2011, 01:57 PM	#2240
Dueling1911s Member Join Date: September 21, 2011 Location: Houston, TX Posts: 124

September 21, 2011, 09:07 PM	#2241
VaGunNut Member Join Date: March 27, 2011 Posts: 72	Hope your still not using the powder out of those antique metal containers.......lol

September 21, 2011, 10:05 PM	#2242
Rollis R. Karvellis Member Join Date: February 16, 2007 Location: S.E. OHIO Posts: 706	Those metal containers are pretty modern, there are guy's here using powder that came in coffee type bags. __________________ Honest officer this is my only log book. The only use of a handgun is to get you from where you are, to where your rifle is. Rome is burning............pass the popcorn.

September 22, 2011, 02:55 PM	#2243
Ronno Member Join Date: April 18, 2010 Posts: 66	Rollie.... Let me know when you are in the hometown area...

September 22, 2011, 06:05 PM	#2244
Rollis R. Karvellis Member Join Date: February 16, 2007 Location: S.E. OHIO Posts: 706	Probably not till mid Oct. Will P.M., or FB. The Mod's will yell if we drift to much on this thread. __________________ Honest officer this is my only log book. The only use of a handgun is to get you from where you are, to where your rifle is. Rome is burning............pass the popcorn.

September 22, 2011, 07:15 PM	#2245
Cdstang Member Join Date: June 1, 2011 Posts: 14

September 23, 2011, 08:17 PM	#2246
Olympus Member Join Date: July 14, 2008 Posts: 2,189	__________________ www.brownscustomgrips.com Find Us On Facebook! M1911 Knife Authorized Dealer

September 27, 2011, 06:26 PM	#2248
GLShooter Member Join Date: February 18, 2004 Location: Arizona Posts: 343	I've seen theater in the round but never reloading on the square!! Looks like you have got it down to a workable minimalist approach. Good job there. Greg

September 28, 2011, 09:25 AM	#2249
spcrobbins Member Join Date: September 26, 2011 Location: Missouri Posts: 39	LAH, Is that a Lyman All-American Turret Press I see?

September 28, 2011, 11:52 AM	#2250
GLShooter Member Join Date: February 18, 2004 Location: Arizona Posts: 343	I looked at his pics and that is most certainly a Lyman AA. An Oldie but a Goodie!! I depend on my pair for lots of good loads. Greg