What is the last gun that you bought? - Page 49

teknoid · July 10, 2008, 05:50 PM

Didn't buy them, but recently got a Bernadelli 60 in .380, Arminius .32, Taurus 83 .38, and RG .22 revolvers, Winchester '94 .30-30, and an old Stevens .22 semi. They spent years in a closet and took a lot of cleaning, but they work fine. None are worth much, but they have a load of sentimental value. They were my fathers.

I wish he still had them. They were inherited.

SouthpawShootr · July 10, 2008, 05:52 PM

Springfield 1911 "Loaded" 9mm Target

A short while later I found one LN 9mm Loaded with fixed sights for just a little over half the price of a new on, so that one's mine as well.

About 2 weeks ago, a Charter Arms Bulldog .44 stainless.

2 Mosin Nagant M44s last week.

Yesterday, I took possession of an all stainless Taurus PT1911 w/rail.

I'm done for a while.

ryuu55 · July 18, 2008, 01:20 PM

Yesterday I picked up my Taurus PT1911 Stainless (from Budsgunshop.com).... I can't wait to take it out this weekend.

glock2740 · July 18, 2008, 01:25 PM

Taurus PT1911, while waiting for a backordered Stl. Kimber Pro CarryII. PT turned out to be one hell of a shooter. Can't wait to get the Kimber though.

steelyblue · July 18, 2008, 01:42 PM

Just bought a kel tec pf9. I have to wait for a delay on the backgroung check. I can't wait till my chl comes in, so I don't have to go through this garbage anymore.

JackCrow · July 18, 2008, 01:53 PM

Ruger 7.5" Super Blackhawk .44mag.
Used but you can't tell without a rather detailed inspection.
This will be the first .44mag I've owned (or fired for that matter). Looking forward to wringing it out this weekend!

MedWheeler · July 18, 2008, 01:59 PM

Last gun purchased by me was a Bersa Thunder .380, about ten days ago. Before that, my last handgun purchase, if I recall correctly, was a Walther PPK/S, in 1990. I no longer have that one; if I did, I wouldn't have the Bersa.

FranklyTodd · July 18, 2008, 02:05 PM

Sig P239 9mm - DA/SA last month. The one before that, M&P340 j-frame last fall.

Overpaid for both of them, but it's only money...

yosarian · July 18, 2008, 02:24 PM

Glock 26 it was an officers carry gun who made it rich with some smart investments and decided the force was no longer for him.I think its kinda cool owning a retied cops gun.

toddmog · July 18, 2008, 02:29 PM

Kahr CW9...got it yesterday

.308 garand · July 18, 2008, 02:53 PM

Picked up a Sig P6 Tuesday (ordered from Dansammo.com). Paid the extra $20 and got one that had been cleaned and refinished with a moly resin. Not a bad deal especially since they raised the price of the refinished one from $279 to $299.

Mine came with refinished gun, box, 2 mags, holster, 2 mag pouches and cleaning kit $279. $326 after shipping and xfer fee.
Can't wait to get it to the range.

.308

Storm · July 18, 2008, 04:19 PM

Sw1911 and Model 39-2

psp7304 · July 19, 2008, 06:35 PM

Saiga 7.62X39

keepurpowderdry · July 19, 2008, 06:41 PM

chinese norinco sks paratrooper

KCMO · July 19, 2008, 06:58 PM

A LAR-8 just happened to follow me home from the gun shop yesterday

Last handgun was a S&W 22A for affordable plinking

Drgong · July 19, 2008, 07:51 PM

Buying my first handgun, a Browning Hi Power...

DRYHUMOR · July 19, 2008, 08:19 PM

I picked up a Winchester 70 Super Grade today. 7mm Remmag

Got another thread going on rifle country about it, any help appreciated.

It's got a G20XXX serial, I'm trying to figure out the year built. Yes, I know, G and five digits. Not six or seven.

It's nice though, super figured buttstock, doesn't seem to have been shot much at all, can't say if ever though. If it is about 40 years old, it's a darn nice one.

moph759fl · July 19, 2008, 08:45 PM

Last one was a Ruger, SS, 3" .357MAG GP100

Fred40 · July 19, 2008, 08:55 PM

Just picked up a Springfield Target Loaded (Blackened) 1911. My first 1911.

FLoppyTOE · July 19, 2008, 10:00 PM

Ruger Super Blackhawk Hunter Bisley .44 mag

bigfatdave · July 19, 2008, 10:19 PM

Ruger mkIII target (my first handgun)
Walther P22 target (MrsBFD's first handgun)

So far, the problems from the Ruger have been my fault, and the problems with the Walther have been the Walther's fault.
Both are a blast at the range, and cheap to shoot.
In the long run, I think buying those two pistols will be quite expensive though, as now we both want more, more, more.

Anyone able to recommend a manufacturer making centerfire handguns with a profile similar to the Ruger frame? We both seem to prefer the angle of the grip on the Ruger.

benderx4 · July 19, 2008, 11:01 PM

Last week, Gander Mountain had a BHP in .40 for $500 that I just couldn't say no to. Always wanted a BHP - can't wait to get it to the range. Any suggestions on ammo? This is my first .40SW.

Bought a Seecamp LWS32 last month.

U-235 · July 19, 2008, 11:06 PM

I just built and AR-15. DPMS stripped lower and an upper kit from Model 1 Sales.

xray 99 · July 19, 2008, 11:56 PM

SIG P220-R Carry

parisite · July 20, 2008, 01:09 AM

Dan Wesson PM9, 9mm 1911. Awesome.

July 18, 2008, 01:42 PM	#1205
steelyblue Member Join Date: November 16, 2007 Location: Rio Grande Valley, Texas Posts: 527	Just bought a kel tec pf9. I have to wait for a delay on the backgroung check. I can't wait till my chl comes in, so I don't have to go through this garbage anymore. __________________ Kimber Eclipse Target II Kimber SS Pro II (9mm) Dan Wesson Classic Bobtail Ruger Mark III 22/45 SS

July 18, 2008, 01:53 PM	#1206
JackCrow Member Join Date: May 25, 2007 Location: Tucson, AZ. Posts: 186	Ruger 7.5" Super Blackhawk .44mag. Used but you can't tell without a rather detailed inspection. This will be the first .44mag I've owned (or fired for that matter). Looking forward to wringing it out this weekend! __________________ This Jack Crow is no other Jack Crow.

July 18, 2008, 02:24 PM	#1209
yosarian Member Join Date: October 23, 2007 Location: florida Posts: 181	Glock 26 it was an officers carry gun who made it rich with some smart investments and decided the force was no longer for him.I think its kinda cool owning a retied cops gun. __________________ You don't need a background check to buy a politician!

July 18, 2008, 02:53 PM	#1211
.308 garand Member Join Date: December 20, 2006 Location: Rowlett, TX Posts: 89	Picked up a Sig P6 Tuesday (ordered from Dansammo.com). Paid the extra $20 and got one that had been cleaned and refinished with a moly resin. Not a bad deal especially since they raised the price of the refinished one from $279 to $299. Mine came with refinished gun, box, 2 mags, holster, 2 mag pouches and cleaning kit $279. $326 after shipping and xfer fee. Can't wait to get it to the range. .308 __________________ 308 My 870 Build

July 19, 2008, 06:58 PM	#1215
KCMO Member Join Date: May 23, 2004 Posts: 34	A LAR-8 just happened to follow me home from the gun shop yesterday Last handgun was a S&W 22A for affordable plinking Last edited by KCMO; July 20, 2008 at 01:53 AM.

July 10, 2008, 05:50 PM	#1201
teknoid Member Join Date: April 23, 2007 Location: Kentucky Posts: 225	Didn't buy them, but recently got a Bernadelli 60 in .380, Arminius .32, Taurus 83 .38, and RG .22 revolvers, Winchester '94 .30-30, and an old Stevens .22 semi. They spent years in a closet and took a lot of cleaning, but they work fine. None are worth much, but they have a load of sentimental value. They were my fathers. I wish he still had them. They were inherited.

July 10, 2008, 05:52 PM	#1202
SouthpawShootr Member Join Date: December 29, 2002 Location: Chesapeake, VA Posts: 2,623	Springfield 1911 "Loaded" 9mm Target A short while later I found one LN 9mm Loaded with fixed sights for just a little over half the price of a new on, so that one's mine as well. About 2 weeks ago, a Charter Arms Bulldog .44 stainless. 2 Mosin Nagant M44s last week. Yesterday, I took possession of an all stainless Taurus PT1911 w/rail. I'm done for a while.

July 18, 2008, 01:20 PM	#1203
ryuu55 Member Join Date: June 4, 2008 Location: ALABAMA Posts: 12	Yesterday I picked up my Taurus PT1911 Stainless (from Budsgunshop.com).... I can't wait to take it out this weekend.

July 18, 2008, 01:25 PM	#1204
glock2740 member Join Date: July 17, 2008 Posts: 9	Taurus PT1911, while waiting for a backordered Stl. Kimber Pro CarryII. PT turned out to be one hell of a shooter. Can't wait to get the Kimber though.

July 18, 2008, 01:59 PM	#1207
MedWheeler Member Join Date: June 14, 2008 Location: SouthEastern FL Posts: 2,389	Last gun purchased by me was a Bersa Thunder .380, about ten days ago. Before that, my last handgun purchase, if I recall correctly, was a Walther PPK/S, in 1990. I no longer have that one; if I did, I wouldn't have the Bersa.

July 18, 2008, 02:05 PM	#1208
FranklyTodd Member Join Date: November 27, 2007 Posts: 515	Sig P239 9mm - DA/SA last month. The one before that, M&P340 j-frame last fall. Overpaid for both of them, but it's only money...

July 18, 2008, 02:29 PM	#1210
toddmog Member Join Date: November 28, 2007 Location: Kansas Posts: 25	Kahr CW9...got it yesterday

July 19, 2008, 06:35 PM	#1213
psp7304 Member Join Date: March 23, 2007 Posts: 132	Saiga 7.62X39

July 19, 2008, 06:41 PM	#1214
keepurpowderdry Member Join Date: July 19, 2008 Posts: 3	chinese norinco sks paratrooper

July 19, 2008, 07:51 PM	#1216
Drgong Member Join Date: July 16, 2008 Location: Ashe Co, NC and Gastonia NC Posts: 1,259	Buying my first handgun, a Browning Hi Power...

July 19, 2008, 08:19 PM	#1217
DRYHUMOR Member Join Date: July 6, 2008 Posts: 1,702	I picked up a Winchester 70 Super Grade today. 7mm Remmag Got another thread going on rifle country about it, any help appreciated. It's got a G20XXX serial, I'm trying to figure out the year built. Yes, I know, G and five digits. Not six or seven. It's nice though, super figured buttstock, doesn't seem to have been shot much at all, can't say if ever though. If it is about 40 years old, it's a darn nice one. __________________ "Until the day of his death, no man can be sure of his courage"

July 19, 2008, 08:45 PM	#1218
moph759fl Member Join Date: December 6, 2005 Location: SW Florida Posts: 123	Last one was a Ruger, SS, 3" .357MAG GP100 __________________ Eric Member NRA CCW MOAA Life Member MOPH(2d Award) Life Member www.purpleheart.org Army/Crossed Arrows - Retired

July 19, 2008, 08:55 PM	#1219
Fred40 Member Join Date: March 31, 2008 Posts: 90	Just picked up a Springfield Target Loaded (Blackened) 1911. My first 1911.

July 19, 2008, 10:00 PM	#1220
FLoppyTOE Member Join Date: May 17, 2008 Location: Punta Gorda, FL Posts: 102	Ruger Super Blackhawk Hunter Bisley .44 mag

July 19, 2008, 10:19 PM	#1221
bigfatdave Member Join Date: July 13, 2008 Location: Near Camp Perry Posts: 5,399	Ruger mkIII target (my first handgun) Walther P22 target (MrsBFD's first handgun) So far, the problems from the Ruger have been my fault, and the problems with the Walther have been the Walther's fault. Both are a blast at the range, and cheap to shoot. In the long run, I think buying those two pistols will be quite expensive though, as now we both want more, more, more. Anyone able to recommend a manufacturer making centerfire handguns with a profile similar to the Ruger frame? We both seem to prefer the angle of the grip on the Ruger. __________________ Write your legislators Really, stop reading this and write your legislators, at all levels

July 19, 2008, 11:01 PM	#1222
benderx4 Member Join Date: May 4, 2008 Location: Orlando, FL Posts: 1,276	Last week, Gander Mountain had a BHP in .40 for $500 that I just couldn't say no to. Always wanted a BHP - can't wait to get it to the range. Any suggestions on ammo? This is my first .40SW. Bought a Seecamp LWS32 last month.

July 19, 2008, 11:06 PM	#1223
U-235 Member Join Date: May 1, 2007 Location: Minneapolis, MN Posts: 131	Built an AR-15 I just built and AR-15. DPMS stripped lower and an upper kit from Model 1 Sales.

July 19, 2008, 11:56 PM	#1224
xray 99 Member Join Date: April 14, 2008 Posts: 13	SIG P220-R Carry