The CZ Club - Page 61

451 Detonics · April 18, 2011, 10:48 AM

CZ 52...Novak sights, CZ wood grip panels, Harrington competition firing pin and hardened rollers.

A great match for my Papashaw...

eerw · April 26, 2011, 02:05 PM

CZ parts gun project. turned out OK.

SleazyRider · April 26, 2011, 07:49 PM

Fritz1, if you don't mind, tell me about the holster for that pretty CZ75 stainless several posts ago.

tekarra · April 26, 2011, 08:50 PM

eerw,
How about some details of the parts used on that fine looking pistol.

GojuBrian · April 26, 2011, 09:01 PM

Sp01 tactical. The one in the middle ofcourse.

Sent from my iPhone using Tapatalk

armoredman · April 26, 2011, 10:14 PM

Beautiful photography, eerw, beautiful work.
451, I'd LOVE to have a Papashaw...that HAS to be a blast to shoot.
Lord Teapot, there has to be people who love it, and that's great - for me the CZ -100 was the one and only I'll never buy again. Nothing wrong with the gun, worked as designed, but I couldn't stand that trigger. I am glad to see someone likes it!

fritz1 · April 26, 2011, 10:15 PM

SleazyRider. it's a Wild Bill Fusion custom, got it at a gun show fits nice and draws very easily but if you turn it upside down it will start to creep out depending on how worn it is, very nice looking holster and very thick leather.

larryh1108 · April 26, 2011, 10:25 PM

Quote:

turned out OK.

Ok, huh? My man, that is beautiful work. Almost breath-taking. Nice... very nice.

ISO1600 · April 27, 2011, 12:36 AM

I just started to read up on these fine pistols (75B/SA) yesterday, and now i'm seriously considering one. They sound like very good shooters, and a great value as well.
I haven't been able to find a good number for the pull on a factory SA trigger... just the fancy triggers and modified ones also.

Jonah71 · April 27, 2011, 09:54 AM

I can't seem to find any OD green CZ 75B's anywhere. Am I the only one around here that ended up with one of those ugly things? I think it's mfg. date is 2003. And btw... it's so reliable, it's losing the "ugly" a bit. Besides, it was too good of a deal to pass up.

larryh1108 · April 27, 2011, 10:00 AM

OD green? You need to post a picture. Is it possible it's not a factory finish?

Jonah71 · April 27, 2011, 11:47 AM

I can't do pictures here on this pc, but what I can do is get the ser. # and post it the next time I'm in the office. Maybe someone could find it then. Or better yet, I may find it on one of my older posts.

Cactus Jack Arizona · April 27, 2011, 12:42 PM

A couple of weeks ago I purchased one of the few (999) Cold War Commemorative 75's. I love the Cyrillic writing.

schmeky · April 27, 2011, 01:00 PM

Quote:

Originally Posted by eerw

CZ parts gun project. turned out OK

Uh, no . . . it turned out fantastic. Beautiful work.

eerw · April 27, 2011, 01:20 PM

Thanks all.

OK here are some details:
Started with a 75B frame and then got hold of a 75SA topend in 9mm.
The frame was modified. Beavertail was recontoured for a more upswept look. the frame was also cut and then a magwell welded on and finished out (GK Custom part and install).
The thumbsafety was also welded up with a bigger shelf ( EGW welded the part, but GKC says they can do that too ) and its very easy for me to manipulate. A CZ85C mag release was added too.
the slide was cut for Heinie Lo-mount "Ledge" rear sight and a CZ Tactical Sport front sight was thinned and serrated 30lpi. It is a great sight picture, very fast and easy to see.
CZ comp hammer as added and an old style SAO trigger installed. trigger breaks at just under 2#, barrel crown was recut. reliability work done.
And then all cerakoted black.

GK Custom is located in Colorado Springs, I hang out there and do CZ trigger jobs.
EGW is George Smith's shop in PA.

larryh1108 · April 27, 2011, 02:18 PM

Is there a web site or something I can bookmark for some future work? I have a CZ40P and to put into into the hands of a CZ loving place would make me happy. I know it comes with a cost but that's to be expected so we have to save to make it happen.

FourTeeFive · April 28, 2011, 02:56 PM

Ok, I've resisted long enough. Sorry for the mediocre cellphone photo. Here's my double-action CZ family:

RAMI 2075 BD
P-01 twins (one with a few polished parts)
SP-01 Tactical

tekarra · April 28, 2011, 08:59 PM

Nice family, hope you have a few more additions.

armoredman · April 28, 2011, 09:22 PM

You need some polished brass grips screws...

FourTeeFive · April 28, 2011, 10:39 PM

I'll have to take some better photos. The polished parts are chrome; hard to see in the photos.

I do have some nice aluminum grips too. Will put those on and get some real pictures.

eerw · April 29, 2011, 05:27 PM

Quote:

Is there a web site or something I can bookmark for some future work? I have a CZ40P and to put into into the hands of a CZ loving place would make me happy. I know it comes with a cost but that's to be expected so we have to save to make it happen.

\
sorry no website at this time. but send a PM here when you are ready.

Jonah71 · April 30, 2011, 12:22 PM

Quote:

Originally Posted by FourTeeFive

Ok, I've resisted long enough. Sorry for the mediocre cellphone photo. Here's my double-action CZ family:

RAMI 2075 BD
P-01 twins (one with a few polished parts)
SP-01 Tactical

OK FourTeeFive, I am now experiancing the sin of envy...thank you so much for the inspiration of a future sermon!

FourTeeFive · April 30, 2011, 04:13 PM

Quote:

OK FourTeeFive, I am now experiancing the sin of envy...thank you so much for the inspiration of a future sermon!

They're addictive. As a brand I think CZ makes fantastic products. The only other CZ I have is a .22LR bolt-action rifle. Hopefully I'll be expanding the collection in the future.

JTQ · April 30, 2011, 11:56 PM

Quote:

eerw wrote,
The thumbsafety was also welded up with a bigger shelf ( EGW welded the part, but GKC says they can do that too ) and its very easy for me to manipulate.

That's the thumb safety the CZ75 needs to have from the factory. Very nice work.

Jonah71 · May 1, 2011, 09:20 AM

My old 75B OD green steel frame is one of the most accurate pistols I ever fired. I think it's a 2003 mod. If I remember right the ser. # is BN61?. If it is from 2003 someone took good care of it. Just one small scratch.

April 18, 2011, 10:48 AM	#1501
451 Detonics Member Join Date: January 4, 2011 Location: Indiana Posts: 2,442	CZ 52...Novak sights, CZ wood grip panels, Harrington competition firing pin and hardened rollers. A great match for my Papashaw... __________________ Tergum absentis vir , EGO sum scientia

April 26, 2011, 10:14 PM	#1506
armoredman Member Join Date: November 19, 2003 Location: proud to be in AZ Posts: 15,060	Beautiful photography, eerw, beautiful work. 451, I'd LOVE to have a Papashaw...that HAS to be a blast to shoot. Lord Teapot, there has to be people who love it, and that's great - for me the CZ -100 was the one and only I'll never buy again. Nothing wrong with the gun, worked as designed, but I couldn't stand that trigger. I am glad to see someone likes it! __________________ If total government control equals safety, why are prisons so dangerous? http://czfirearms.us/ The original CZ Forum, new address.

April 27, 2011, 12:36 AM	#1509
ISO1600 Member Join Date: January 31, 2011 Location: Abilene, TX Posts: 178	I just started to read up on these fine pistols (75B/SA) yesterday, and now i'm seriously considering one. They sound like very good shooters, and a great value as well. I haven't been able to find a good number for the pull on a factory SA trigger... just the fancy triggers and modified ones also. __________________ Remington 597/870(12/20ga), H&R 949, Ruger SR1911/LCP www.flickr.com/mx5chris www.whoischris.net

April 27, 2011, 10:00 AM	#1511
larryh1108 Member Join Date: August 29, 2008 Location: Litchfield County, CT Posts: 1,227	OD green? You need to post a picture. Is it possible it's not a factory finish? __________________ Statistics showing high murder rates justify gun control but statistics showing increasing murder rates after gun control are "just statistics."

April 27, 2011, 12:42 PM	#1513
Cactus Jack Arizona Member Join Date: July 25, 2008 Location: Southwest MO Posts: 624	A couple of weeks ago I purchased one of the few (999) Cold War Commemorative 75's. I love the Cyrillic writing. __________________ VIVA LA CONSTITUTION!!!!!!

April 26, 2011, 02:05 PM	#1502
eerw Member Join Date: January 5, 2003 Location: AZ Posts: 717	CZ parts gun project. turned out OK.

April 26, 2011, 07:49 PM	#1503
SleazyRider Member Join Date: February 25, 2008 Location: New York Posts: 1,248	Fritz1, if you don't mind, tell me about the holster for that pretty CZ75 stainless several posts ago.

April 26, 2011, 08:50 PM	#1504
tekarra Member Join Date: February 13, 2007 Posts: 1,152	eerw, How about some details of the parts used on that fine looking pistol.

April 26, 2011, 10:15 PM	#1507
fritz1 Member Join Date: March 10, 2006 Posts: 48	SleazyRider. it's a Wild Bill Fusion custom, got it at a gun show fits nice and draws very easily but if you turn it upside down it will start to creep out depending on how worn it is, very nice looking holster and very thick leather.

April 27, 2011, 09:54 AM	#1510
Jonah71 Member Join Date: December 4, 2009 Location: Central Missouri near Whiteman A.F.B. Posts: 1,224	I can't seem to find any OD green CZ 75B's anywhere. Am I the only one around here that ended up with one of those ugly things? I think it's mfg. date is 2003. And btw... it's so reliable, it's losing the "ugly" a bit. Besides, it was too good of a deal to pass up.

April 27, 2011, 11:47 AM	#1512
Jonah71 Member Join Date: December 4, 2009 Location: Central Missouri near Whiteman A.F.B. Posts: 1,224	I can't do pictures here on this pc, but what I can do is get the ser. # and post it the next time I'm in the office. Maybe someone could find it then. Or better yet, I may find it on one of my older posts.

April 27, 2011, 01:20 PM	#1515
eerw Member Join Date: January 5, 2003 Location: AZ Posts: 717	Thanks all. OK here are some details: Started with a 75B frame and then got hold of a 75SA topend in 9mm. The frame was modified. Beavertail was recontoured for a more upswept look. the frame was also cut and then a magwell welded on and finished out (GK Custom part and install). The thumbsafety was also welded up with a bigger shelf ( EGW welded the part, but GKC says they can do that too ) and its very easy for me to manipulate. A CZ85C mag release was added too. the slide was cut for Heinie Lo-mount "Ledge" rear sight and a CZ Tactical Sport front sight was thinned and serrated 30lpi. It is a great sight picture, very fast and easy to see. CZ comp hammer as added and an old style SAO trigger installed. trigger breaks at just under 2#, barrel crown was recut. reliability work done. And then all cerakoted black. GK Custom is located in Colorado Springs, I hang out there and do CZ trigger jobs. EGW is George Smith's shop in PA. Last edited by eerw; April 30, 2011 at 09:03 AM.

April 27, 2011, 02:18 PM	#1516
larryh1108 Member Join Date: August 29, 2008 Location: Litchfield County, CT Posts: 1,227	Is there a web site or something I can bookmark for some future work? I have a CZ40P and to put into into the hands of a CZ loving place would make me happy. I know it comes with a cost but that's to be expected so we have to save to make it happen. __________________ Statistics showing high murder rates justify gun control but statistics showing increasing murder rates after gun control are "just statistics."

April 28, 2011, 02:56 PM	#1517
FourTeeFive Member Join Date: February 25, 2006 Location: PNW WA Posts: 1,072	Ok, I've resisted long enough. Sorry for the mediocre cellphone photo. Here's my double-action CZ family: RAMI 2075 BD P-01 twins (one with a few polished parts) SP-01 Tactical __________________ Laws that forbid the carrying of arms... disarm only those who are neither inclined nor determined to commit crimes... Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man. Thomas Jefferson

April 28, 2011, 08:59 PM	#1518
tekarra Member Join Date: February 13, 2007 Posts: 1,152	Nice family, hope you have a few more additions.

April 28, 2011, 09:22 PM	#1519
armoredman Member Join Date: November 19, 2003 Location: proud to be in AZ Posts: 15,060	You need some polished brass grips screws... __________________ If total government control equals safety, why are prisons so dangerous? http://czfirearms.us/ The original CZ Forum, new address.

April 28, 2011, 10:39 PM	#1520
FourTeeFive Member Join Date: February 25, 2006 Location: PNW WA Posts: 1,072	I'll have to take some better photos. The polished parts are chrome; hard to see in the photos. I do have some nice aluminum grips too. Will put those on and get some real pictures.

May 1, 2011, 09:20 AM	#1525
Jonah71 Member Join Date: December 4, 2009 Location: Central Missouri near Whiteman A.F.B. Posts: 1,224	My old 75B OD green steel frame is one of the most accurate pistols I ever fired. I think it's a 2003 mod. If I remember right the ser. # is BN61?. If it is from 2003 someone took good care of it. Just one small scratch.