The CZ Club - Page 62

Kiln · May 1, 2011, 09:47 AM

Don't know if this counts since its not too fancy but I've got an old milsurp CZ-70 in .32ACP.
I keep hearing that the magazine capacity is only 7 or 8 rounds but mine holds 9+1 and feeds reliably. Is this normal or did somebody spend time modifying the magazine before I got ahold of it?

snuffy · May 1, 2011, 11:36 PM

Can I join?

Quote:

A couple of weeks ago I purchased one of the few (999) Cold War Commemorative 75's. I love the Cyrillic writing.

Am I reading this right? Only 999 of the cold war commemorative model made? Wow, I have one, just got it a week ago. Pics;

I like it, shoots great, the SA trigger could be better,,,---WILL be better. Can't wait to try it at IPSC, IDPA shoots.

Got some extra mags coming, conversion kit for the 650 dillon, mold from lee, sizer for the lyman 450. Need a holster and mag holders.

Quack · May 2, 2011, 01:44 PM

got my first CZ75 SA this past weekend. I can't believe i waited so long to try one of these. Got it for $300

and my other "CZ"

yhtomit · May 2, 2011, 08:10 PM

Quote:

"got my first CZ75 SA this past weekend. I can't believe i waited so long to try one of these. Got it for $300"

Where?

A steal.

Your DW is fantastic looking, too. I wish CZ-75s had the 1911-style straight-back trigger ... that is one thing that keeps 1911s on my wishlist.

timothy

Quack · May 2, 2011, 08:19 PM

Thanks!!!

I was going to get another 1911 (I currently have 13 of them), but saw the CZ with a flat trigger, so i couldn't say no

tekarra · May 2, 2011, 08:58 PM

Can't believe you got it for $300! Man that was a steal. Hope you post a shooting report.

Quack · May 2, 2011, 09:08 PM

neither can I. the person said make an offer, so as usual, i low ball expecting for them to counter with a high number.

The gun gods are on my side because i always seem to get killer deals, such as trading a G19 for a NIB Springfield Compact, a TRP CHampion for $700, a Stainles Loaded for $499, a Wilson Combat Longslide for $1395, a Springfield Professional Operator for $1525, and a pair of Springfields (9mm hi-cap and .38 Super) that were worked over by the Custom Shop (~$2000 in work) for $1500. I guess it's Karma.

circuitspore · May 8, 2011, 09:18 PM

I recently picked up a full-size 75B w/ non-recurve trigger, so I'm parting ways with my P-01. The P-01 feels like it was custom made for my hand, but the stupid recurve trigger kills my finger after a while. I'm currently carrying a Kahr CW9 (blasphemy, I know), so the P-01 just doesn't have a place in my lineup now that I've got a full-size CZ.

But, before I cut her loose, I thought I'd share this photo with you guys. She really looks stunning with these cocobolo grips and a healthy dose of sunshine:

eerw · May 8, 2011, 09:33 PM

nice looking P01.
why don't you have the trigger switched out to a 75B/97 trigger.

Carter · May 8, 2011, 09:42 PM

My CZ Phantom and its CZ drop leg holster with serpa style release button.

FourTeeFive · May 9, 2011, 09:56 AM

Any recommendations for a SP-01 Tactical range-use holster?

Quack · May 9, 2011, 11:43 AM

finished my trigger work over the weekend. took out the FPB, added a SAO trigger, 13# and pre-B sear. I stoned the hammer and sear angles for neutral engagement. here's what i ended up with...

with the FPB and B sear this is what i got.

and i don't have photo's, but stock was something like 4Lbs 11oz.

Jonah71 · May 9, 2011, 11:57 AM

I have got to get what I need to post pics onto this site from my cell phone and learn how to do it! A friend said it's just a matter of getting the right usb cable from t mobile and running it from phone to pc. He doesn't understand how little I know about such matters. But I really need to post a pic of my old OD green CZ 75B! If I have to, I'll pay one of the tech nerd youngsters to do it for me.

1SOW · May 9, 2011, 08:56 PM

Quote:

I'll pay one of the tech nerd youngsters to do it for me.

Just find the nearest 12-14 yr old kid and ask for help.

That's not an insult, it's a fact.

tekarra · May 10, 2011, 09:22 PM

1SOW, amen to that brother. Unfortunately not many kids of that age in my area when I need help.

JROC · May 29, 2011, 11:46 PM

Here's my new(to me) Pre B that I got from Wideners. It's an old Czech police gun. It's one of the transition between Pre B, and B model CZ75's that look like a B model, but are actually Pre B's. I plan to(and am) mod it, and defiantly put a new finish on it. I've already added a 13lb mainspring, 16lb recoil spring is on the way(been wondering where it's at) CZ Custom Competition hammer and extended firing pin, CZ rubber grips, and I think that's it for now. I will also add some nicer sights to it.

GojuBrian · May 29, 2011, 11:56 PM

Quote:

Originally Posted by FourTeeFive

Any recommendations for a SP-01 Tactical range-use holster?

Glock 21 fobus holster.

Sent from my iRazzy

Towboater · May 30, 2011, 01:06 AM

Well I joined the club! Picked up this CZ 75 RSR Retro BNIB in a trade ( Beretta 92 Inox, I think I did well!)
Haven't shot it yet as I still can't get a solid number from anyone on how many of these were produced. I think I will when I get home next week though! Already in the market for a Phantom as well!

dancz · May 30, 2011, 05:21 AM

Great thread for great guns.

I'm heading towards my second century of CZ's so rather than post a couple of hundred photos all over again here is a link to another thread I started showing some of mine.

http://www.thehighroad.org/showthread.php?t=588822

hope this will add me to your CZ thread.

FourTeeFive · May 30, 2011, 12:03 PM

I'm looking at getting some of the Mec-Gar MGCZ7516B 16-round magazines to use in my SP-01 Tactical. Does anyone have any recommendations for rubber base pads to use with these? I saw somewhere that Beretta 92 magazine base pads will work.

JROC · May 30, 2011, 12:35 PM

^ I would order some from CZ Custom. I assume one of these would work with a Mec-Gar magazine.(which I have no experience with)
http://czcustom.com/CZ_base_pads.aspx

You might call and ask them. CZ Custom is a great place to buy from, and has very good customer service. Everytime I've ordered from them in the plast couple of weeks I get my stuff in 2 business days, and that's going from AZ to SC.

FrankCastleThePunisher · May 30, 2011, 10:20 PM

Count me a new member as I just bought today a CZ75 sp-01 tactical, I caught on sale for $100.00 off regular price at Academy Sports. Can't wait till tomorrow to check it out at the range. Had checked out a p-06 the other day, and was impressed. The difference in the two guns is the sp-01 is steel frame and 12 shot capacity and weighs 2.4 lbs. The p-06 is light alloy frame and 10 shot capacity and lighter at 1.8 lbs. plus it was about 40.00 more than the sp-01 that I got on sale. All the forum reviews about CZ guns convinced me about the quality and accuracy of CZ guns. Hope I will be happy with my new gun.

EAJ · June 1, 2011, 04:00 PM

CZ 75 D PCR Compact

CZ 75 SP-01 Custom Shop

CZ 2075 RAMI Sub-Compact

CZ 83

Omitting CZ DW 1911’s and CZ rifles

Towboater · June 3, 2011, 08:15 PM

Anyone know the value of a CZ RSR Retro NIB? Thinking about swapping mine for a Phantom.

Davidfl · June 3, 2011, 08:23 PM

cz 75 sp01 phantom in 4 mags

)))))))))))))

May 9, 2011, 09:56 AM	#1536
FourTeeFive Member Join Date: February 25, 2006 Location: PNW WA Posts: 1,072	Any recommendations for a SP-01 Tactical range-use holster? __________________ Laws that forbid the carrying of arms... disarm only those who are neither inclined nor determined to commit crimes... Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man. Thomas Jefferson

May 29, 2011, 11:46 PM	#1541
JROC Member Join Date: May 29, 2011 Location: SC Posts: 210	Here's my new(to me) Pre B that I got from Wideners. It's an old Czech police gun. It's one of the transition between Pre B, and B model CZ75's that look like a B model, but are actually Pre B's. I plan to(and am) mod it, and defiantly put a new finish on it. I've already added a 13lb mainspring, 16lb recoil spring is on the way(been wondering where it's at) CZ Custom Competition hammer and extended firing pin, CZ rubber grips, and I think that's it for now. I will also add some nicer sights to it. Last edited by JROC; May 29, 2011 at 11:54 PM.

May 30, 2011, 12:03 PM	#1545
FourTeeFive Member Join Date: February 25, 2006 Location: PNW WA Posts: 1,072	I'm looking at getting some of the Mec-Gar MGCZ7516B 16-round magazines to use in my SP-01 Tactical. Does anyone have any recommendations for rubber base pads to use with these? I saw somewhere that Beretta 92 magazine base pads will work. __________________ Laws that forbid the carrying of arms... disarm only those who are neither inclined nor determined to commit crimes... Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than to prevent homicides, for an unarmed man may be attacked with greater confidence than an armed man. Thomas Jefferson

May 30, 2011, 10:20 PM	#1547
FrankCastleThePunisher Member Join Date: May 9, 2011 Location: South Posts: 75	Count me a new member as I just bought today a CZ75 sp-01 tactical, I caught on sale for $100.00 off regular price at Academy Sports. Can't wait till tomorrow to check it out at the range. Had checked out a p-06 the other day, and was impressed. The difference in the two guns is the sp-01 is steel frame and 12 shot capacity and weighs 2.4 lbs. The p-06 is light alloy frame and 10 shot capacity and lighter at 1.8 lbs. plus it was about 40.00 more than the sp-01 that I got on sale. All the forum reviews about CZ guns convinced me about the quality and accuracy of CZ guns. Hope I will be happy with my new gun. Last edited by FrankCastleThePunisher; May 30, 2011 at 10:27 PM.

June 3, 2011, 08:15 PM	#1549
Towboater Member Join Date: June 14, 2009 Location: Texas Posts: 66	Anyone know the value of a CZ RSR Retro NIB? Thinking about swapping mine for a Phantom. __________________ Pain is inevitable, Suffering is optional

May 1, 2011, 09:47 AM	#1526
Kiln Member Join Date: March 3, 2011 Posts: 1,817	Don't know if this counts since its not too fancy but I've got an old milsurp CZ-70 in .32ACP. I keep hearing that the magazine capacity is only 7 or 8 rounds but mine holds 9+1 and feeds reliably. Is this normal or did somebody spend time modifying the magazine before I got ahold of it?

May 2, 2011, 01:44 PM	#1528
Quack Member Join Date: January 31, 2003 Location: Cleveland, OH Posts: 1,357	got my first CZ75 SA this past weekend. I can't believe i waited so long to try one of these. Got it for $300 and my other "CZ"

May 2, 2011, 08:19 PM	#1530
Quack Member Join Date: January 31, 2003 Location: Cleveland, OH Posts: 1,357	Thanks!!! I was going to get another 1911 (I currently have 13 of them), but saw the CZ with a flat trigger, so i couldn't say no

May 2, 2011, 08:58 PM	#1531
tekarra Member Join Date: February 13, 2007 Posts: 1,142	Can't believe you got it for $300! Man that was a steal. Hope you post a shooting report.

May 2, 2011, 09:08 PM	#1532
Quack Member Join Date: January 31, 2003 Location: Cleveland, OH Posts: 1,357	neither can I. the person said make an offer, so as usual, i low ball expecting for them to counter with a high number. The gun gods are on my side because i always seem to get killer deals, such as trading a G19 for a NIB Springfield Compact, a TRP CHampion for $700, a Stainles Loaded for $499, a Wilson Combat Longslide for $1395, a Springfield Professional Operator for $1525, and a pair of Springfields (9mm hi-cap and .38 Super) that were worked over by the Custom Shop (~$2000 in work) for $1500. I guess it's Karma.

May 8, 2011, 09:18 PM	#1533
circuitspore Member Join Date: November 30, 2008 Location: Garner, NC Posts: 49	I recently picked up a full-size 75B w/ non-recurve trigger, so I'm parting ways with my P-01. The P-01 feels like it was custom made for my hand, but the stupid recurve trigger kills my finger after a while. I'm currently carrying a Kahr CW9 (blasphemy, I know), so the P-01 just doesn't have a place in my lineup now that I've got a full-size CZ. But, before I cut her loose, I thought I'd share this photo with you guys. She really looks stunning with these cocobolo grips and a healthy dose of sunshine:

May 8, 2011, 09:33 PM	#1534
eerw Member Join Date: January 5, 2003 Location: AZ Posts: 711	nice looking P01. why don't you have the trigger switched out to a 75B/97 trigger.

May 9, 2011, 11:43 AM	#1537
Quack Member Join Date: January 31, 2003 Location: Cleveland, OH Posts: 1,357	finished my trigger work over the weekend. took out the FPB, added a SAO trigger, 13# and pre-B sear. I stoned the hammer and sear angles for neutral engagement. here's what i ended up with... with the FPB and B sear this is what i got. and i don't have photo's, but stock was something like 4Lbs 11oz.

May 9, 2011, 11:57 AM	#1538
Jonah71 Member Join Date: December 4, 2009 Location: Central Missouri near Whiteman A.F.B. Posts: 1,224	I have got to get what I need to post pics onto this site from my cell phone and learn how to do it! A friend said it's just a matter of getting the right usb cable from t mobile and running it from phone to pc. He doesn't understand how little I know about such matters. But I really need to post a pic of my old OD green CZ 75B! If I have to, I'll pay one of the tech nerd youngsters to do it for me.

May 10, 2011, 09:22 PM	#1540
tekarra Member Join Date: February 13, 2007 Posts: 1,142	1SOW, amen to that brother. Unfortunately not many kids of that age in my area when I need help.

May 30, 2011, 05:21 AM	#1544
dancz Member Join Date: April 21, 2011 Posts: 96	Great thread for great guns. I'm heading towards my second century of CZ's so rather than post a couple of hundred photos all over again here is a link to another thread I started showing some of mine. http://www.thehighroad.org/showthread.php?t=588822 hope this will add me to your CZ thread.

May 30, 2011, 12:35 PM	#1546
JROC Member Join Date: May 29, 2011 Location: SC Posts: 210	^ I would order some from CZ Custom. I assume one of these would work with a Mec-Gar magazine.(which I have no experience with) http://czcustom.com/CZ_base_pads.aspx You might call and ask them. CZ Custom is a great place to buy from, and has very good customer service. Everytime I've ordered from them in the plast couple of weeks I get my stuff in 2 business days, and that's going from AZ to SC.

June 1, 2011, 04:00 PM	#1548
EAJ Member Join Date: April 22, 2008 Posts: 456	CZ 75 D PCR Compact CZ 75 SP-01 Custom Shop CZ 2075 RAMI Sub-Compact CZ 83 Omitting CZ DW 1911’s and CZ rifles

June 3, 2011, 08:23 PM	#1550
Davidfl Member Join Date: January 27, 2011 Posts: 134	haha cz 75 sp01 phantom in 4 mags)))))))))))))