Quantcast
Lead Poisoning --Valuable Health Information - Page 7 - THR
THR  

Go Back   THR > Ammunition, Gear, and Firearm Help > Handloading and Reloading

Welcome to THR
You are currently viewing our site as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have, access to post topics, communicate privately with other members (PM), respond to polls, and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!


If you have any problems with the registration process or your account login, please visit the help section.

Reply
 
Thread Tools
Old January 26, 2010, 11:35 PM   #151
jamesicus
Member
 
 
Join Date: January 25, 2010
Location: Southern Arizona
Posts: 93
reconsidered -- too "flip" a post for a serious subject, sorry.

jamesicus

Last edited by jamesicus; January 27, 2010 at 12:14 AM.
jamesicus is offline  
Old February 1, 2010, 07:27 PM   #152
sig2009
Member
 
 
Join Date: February 17, 2007
Posts: 67
Don't eat lead for dinner and you will be fine!
sig2009 is offline  
Old February 20, 2010, 10:20 AM   #153
Fatelvis
Member
 
 
Join Date: December 25, 2002
Location: Lockport, IL
Posts: 1,762
Quote:
Don't eat lead for dinner and you will be fine!
Agreed. The whole "bullet casting creates cancer causing lead vapor in the air" talk is just bull.
__________________
.no bastard ever won a war by dying for his country. You won it by making the other poor dumb bastard die for his country. General George Patton, Speech 31 May 1944.
Fatelvis is offline  
Old February 25, 2010, 09:34 AM   #154
GMFWoodchuck
member
 
 
Join Date: February 18, 2010
Posts: 137
While I'm assuming that the lead is from all of the shooting, I did read an interesting article recently (Yahoo news I think) attributing high lead counts in children from crawling around on the dust that has settled floors. It never really stated how the lead got there, I'm guessing off of paint or something. But it does make me wonder how many sources of lead we really are being subjected to. So like a few others and I said, we should also be checking out other potential sources too. Only to be on the safe side.

Is there a "cheap" air filtration system that will take lead out of the air in my basement where I do my reloading?
GMFWoodchuck is offline  
Old February 25, 2010, 09:47 AM   #155
jcwit
Member
 
 
Join Date: October 19, 2007
Location: Great state of Indiana
Posts: 6,911
Quote:
Is there a "cheap" air filtration system that will take lead out of the air in my basement where I do my reloading?
Personally I think you're worring to much. I really doubt there is much "dust" coming from your bullets.
jcwit is offline  
Old February 25, 2010, 11:01 AM   #156
Walkalong
Moderator
 
 
Join Date: November 20, 2006
Location: Alabama
Posts: 35,280
Hepa Filter might work.

Contractors use them all the time to filter air in working space to prtect the occupants from dust etc..
__________________
Do you ever wonder why nobody ever robs the bag man for the mob? No, you don't.

"Oh bother" said Pooh, as he chambered another round. Author unknown.
Walkalong is online now  
Old February 25, 2010, 01:20 PM   #157
GMFWoodchuck
member
 
 
Join Date: February 18, 2010
Posts: 137
You're probably right. Though sometimes I wonder about the old building I live in. AT least I don't have other unidentifiable plastic fumes in the air though as is what's common in new houses.
GMFWoodchuck is offline  
Old March 3, 2010, 05:01 PM   #158
klw
Member
 
 
Join Date: February 15, 2003
Posts: 95
Lead Levels

My understanding is that if your blood lead level is below 20 there isn't much cause for concern. Between 20 and 30 you should be trying to find out where the exposure is coming from. Between 30 and 40 you should be seeing a doctor. Above 40 you are going to need serious treatment.

Lead levels will drop if the exposure stops. I have my lead levels tested at the beginning and end of each shooting season. At the end of a year of casting bullets and shooting cast bullets my lead levels will be between 23 and 28. After four months off during the winter they will drop to about 15 to 17. You get rid of lead by literally pissing it away. So for lead levels in this range simply taking time off solves the problem.
klw is offline  
Old July 11, 2010, 12:31 AM   #159
HighExpert
Member
 
 
Join Date: May 30, 2010
Location: Central VA in the woods
Posts: 398
I had a bad case of lead contamination back in the middle 90's. Mine was 59 and the doctor went straight up. I was training at an indoor range and shooting 6 days a week for a total of about 5000 rds per week. When I went back to the range to let them know, they discovered that the rear ventilation fans were blowing air out of the range instead of into the range. They appologized and pointed to the waiver posted on the wall that they were not responsible. I told them I had no intention of sueing and was glad they had discovered the mechanical problem. I certainly did not want to rock the boat too much because the other range in town had already gone to a no-lead policy. The doc make me shoot outside only for 6 months, if I was going to shoot at all, and I was down to 9 on the last test. I also started using nitrile gloves when I have any sort of cut on my hands when I reload and, of coarse, washing up well when done.
HighExpert is offline  
Old September 9, 2010, 11:05 AM   #160
SifuGun
Member
 
 
Join Date: September 6, 2010
Posts: 50
Thanks Member "Actionfiles" for that information. You are an asset to the community.
Well I am just starting to reload. And Luckily the only bullet available were the "TMJ's" by Speers. Tmj stand for total metal jacket. Supposedly you will not be handling any lead because bullet is "plated" with copper. But as soon as i saw them a the gun store i said I'll have those, thank you.
SifuGun is offline  
Old September 10, 2010, 03:28 AM   #161
ReloaderEd
Member
 
 
Join Date: August 31, 2010
Location: washington state
Posts: 186
hood over lead pot

My wife was worried about lead fumes being dangerous (I have case bullets for some 54 years since I was 12 years old.
I purchased a cheap hood for a bathroom, mounted it on a cake pan of the correct size and put it on legs attached to a plywood platform under the lead pot. Then the cake pan was attached to the four legs. A dryer vent and flex air duct was attached to the hood and run outside or it can be put into a bucket of water. It removes most the the lead smoke and fumes. I still use plenty of surrounding ventalatallation and it seems to work very well
I submitted the idea to Lee and the old man declined but said it was a good idea. I have several movies of it working and attaching one picture below.
I would appreciate any comments.
http://yfrog.com/n7leadmeltingfluxinghood0j:)
ReloaderEd is offline  
Old October 4, 2010, 12:50 AM   #162
bds
Contributing Member
 
 
Join Date: January 10, 2010
Posts: 8,917
Quote:
Hepa Filter might work.

Contractors use them all the time to filter air in working space to protect the occupants from dust etc..
It's actually Mold/Lead abatement filter (3M 2097) also good for welding.

Home Depot carries the 3M 2097 filter for the P100 respirator ($25 for the respirator kit).

__________________
Revelation 19:11
bds is offline  
Old October 4, 2010, 03:45 AM   #163
evan price
Member
 
 
Join Date: December 7, 2005
Location: http://www.ohioccw.org/ Ohio's best CCW resource!
Posts: 5,143
I handle thousands of pounds of range brass and lead every year. I just had my lead test, it was under ten. I don't take anything but the most basic precautions- I don't even wear gloves regularly except for handling hot items. Ventilation, and not putting anything in your mouth until after you wash, are the keys. Don't worry so much about a little casting or reloading as long as you take those precautions.
__________________
Sic gorgiamus allos subjectatos nunc
evan price is offline  
Old October 18, 2010, 08:05 AM   #164
Pete D.
Member
 
 
Join Date: September 13, 2010
Posts: 1,590
Good to see this thread.
Lead poisoning
Quote:
is
something to be concerned about.
I just got my latest results back = 21.0.
Too high. Hate to admit it but this is my third time over twenty (the others were 40 and 25) over the last ten years. I keep looking at my practices when shooting and casting......and trying to adhere to the basics. Obviously every few years I get sloppy about something and then have to go figure what I've left out or ignored.
About this idea:
Quote:
Like I said earlier, much to do about nothing.
That's true only if you don't have elevated lead levels.

Pete
Pete D. is offline  
Old October 18, 2010, 07:11 PM   #165
jcwit
Member
 
 
Join Date: October 19, 2007
Location: Great state of Indiana
Posts: 6,911
Are you absolutely positively beyond any doubt sure that your elevated levels are caused by reloading and/or casting?

Elevated levels can by caused by many many things, even the water one drinks or the coffee mug one uses.
jcwit is offline  
Old October 18, 2010, 08:22 PM   #166
klw
Member
 
 
Join Date: February 15, 2003
Posts: 95
2012 Gun Digest

The 2012 Gun Digest should have an article on blood lead levels. Covers the causes and how to prevent high lead levels.
klw is offline  
Old October 19, 2010, 10:21 PM   #167
Pete D.
Member
 
 
Join Date: September 13, 2010
Posts: 1,590
Quote:
Are you absolutely positively beyond any doubt sure that your elevated levels are caused by reloading and/or casting?
Yeah. The only time that I am anywhere near lead is when I am shooting, reloading or casting. Building is lead free - not the paint, the plaster, or the pipe.
Water - not an issue. Clean.
cups and dishes......don't actually know. Buy'em. Use'em. Lead in the glazes??
Pete
Pete D. is offline  
Old October 19, 2010, 10:47 PM   #168
jcwit
Member
 
 
Join Date: October 19, 2007
Location: Great state of Indiana
Posts: 6,911
Quote:
cups and dishes......don't actually know. Buy'em. Use'em. Lead in the glazes??
This is a very strong posibility. Do You use the common Coffee Mugs available? Most are made in china. This was brought out a few years ago on another forum as a cause of one of the members elevated lead levels.
jcwit is offline  
Old October 20, 2010, 07:50 AM   #169
Pete D.
Member
 
 
Join Date: September 13, 2010
Posts: 1,590
Iron

I meant to add this note earlier.
A number of posters mentioned taking an iron supplement. I had thought that a good idea some years ago. It is not. Men have no way of eliminating iron from the body. Iron accumulates in the male body much like lead does and becomes toxic, attacking the pancreas and liver. Women - at whom the iron supplements are aimed - don't have this problem due to the menstrual cycle.
Pete
Pete D. is offline  
Old October 20, 2010, 01:30 PM   #170
jcwit
Member
 
 
Join Date: October 19, 2007
Location: Great state of Indiana
Posts: 6,911
Quote:
A number of posters mentioned taking an iron supplement. I had thought that a good idea some years ago. It is not. Men have no way of eliminating iron from the body. Iron accumulates in the male body much like lead does and becomes toxic, attacking the pancreas and liver. Women - at whom the iron supplements are aimed - don't have this problem due to the menstrual cycle.
Are you positive of this for a fact? Are you a MD?

My wife gives blood every time she can and is turned down at times for low iron and believe me it's not from menstrual cycles, she has had a hysterectomy, has not had those cycles for almost 20 years. So say what?

Furthermore I do not remember seeing any warning on bottles of iron supplements, or on bottles of multi vitamins like we take. I'm sure I would know about ANY elevated levels of anything as I have my blood tested 4 times a year at present, And yes heavy metals are one of the tests they do. I'm now down to 4 times a year, 2 years ago I was at 6 tests a year.
jcwit is offline  
Old October 20, 2010, 04:36 PM   #171
Jesse Heywood
Member
 
 
Join Date: December 9, 2009
Location: Kansas
Posts: 1,581
Quote:
Are you positive of this for a fact?
http://ods.od.nih.gov/factsheets/iron.asp#h9
Jesse Heywood is offline  
Old October 20, 2010, 10:03 PM   #172
JohnKSa
Member
 
 
Join Date: January 1, 2003
Location: DFW Area
Posts: 10,153
Quote:
My wife gives blood every time she can and is turned down at times for low iron...
Makes perfect sense. Donating blood is one recommended method for reducing iron levels.
__________________
Did you know there is a TEXAS State Rifle Association?
JohnKSa is offline  
Old December 1, 2010, 05:19 PM   #173
Doc Mongo
Member
 
 
Join Date: November 25, 2010
Posts: 12
North Safety and MSA are good sources for half face masks. For getting lead off your skin you need TSP, or tri-sodium phosphate. Simple Green is a good product, and has TSP added to it already.

With the half face mask, you will need HEPA filters, which are purple. There are others that dont filter lead (the particles are pretty tiny) that are different colors. Rmember: lead filter = purple.

Ventilation is critical. Lots of people set up in basements or sheds and dont have great ventilation there. The fumes have got to get out and away; I really dont know how much fumes are put off by melting down lead bars but I would assume the worst and ventilate well. Id also wear a respirator while melting down the scrap. Im not a reloader(yet- saving for it though), but I had to deal with lead before and its way better to be safe than to go through chelation (similar to chemotherapy - almost, but not quite, worse than the disease).

Having a lead test done in your workshop may be a good idea. Dont let an inspector sell you on a risk assessment: if you reload, your risk has already been assessed. Get it tested so you dont get charged twice. The home lead test kits usually only thell you that there is lead around, not how much. A lead inspector can send samples off to a laboratory and determine if, how much, and where. Then they can tell you how to get it clean, or reccomend someone to do it for you. Hope that helps.

Last edited by Doc Mongo; December 1, 2010 at 05:24 PM. Reason: info added
Doc Mongo is offline  
Old December 15, 2010, 11:08 PM   #174
twofifty
Member
 
 
Join Date: April 21, 2007
Posts: 1,429
lead smelter upwind from you?

Folk, esp. children, who live downwind from lead smelters or car battery recycling foundries are known to have high levels of exposure. There are many other occupational exposure opportunities.

For some here who are looking for that mysterious source of exposure they can't trace to their own reloading activities, the above might just be the source.

Apparently, before unleaded gasoline, the general population's background lead levels were much higher than they now are. Many European countries banned lead from paint in the 1920s, while America waited till 1970....

Last edited by twofifty; December 15, 2010 at 11:45 PM.
twofifty is offline  
Old December 26, 2010, 10:02 AM   #175
.45Guy
Member
 
 
Join Date: September 6, 2005
Posts: 2,305
Going for a lead test on the 4th. Idiots at work are burning massive quantities of CDD caked in lead based paint. The fun never ends.
__________________
.45Guy: A legend in his own right time mind!
.45Guy is offline  
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:20 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
vBulletin Optimisation by vB Optimise.
This site, its contents, Shooting Reviews, and its contents are Copyright (c) 2010-2013 Firearms Forum, Inc.
IMPORTANT DISCLAIMER
Although The High Road has attempted to provide accurate information on the forum, The High Road assumes no responsibility for the accuracy of the information. All information is provided "as is" with all faults without warranty of any kind, either express or implied. Neither The High Road nor any of its directors, members, managers, employees, agents, vendors, or suppliers will be liable for any direct, indirect, general, bodily injury, compensatory, special, punitive, consequential, or incidental damages including, without limitation, lost profits or revenues, costs of replacement goods, loss or damage to data arising out of the use or inability to use this forum or any services associated with this forum, or damages from the use of or reliance on the information present on this forum, even if you have been advised of the possibility of such damages.