Quantcast
Identity and Date of Manufacture of S&W Revolvers - Page 84 - THR
THR  

Go Back   THR > Tools and Technologies > Handguns: Revolvers

Welcome to THR
You are currently viewing our site as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have, access to post topics, communicate privately with other members (PM), respond to polls, and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!


If you have any problems with the registration process or your account login, please visit the help section.

Reply
 
Thread Tools
Old June 4, 2010, 08:27 AM   #2076
jgstang67
Member
 
 
Join Date: June 4, 2010
Posts: 5
Hi, new here, I have a revolver that was my dads , his brother worked for s&w, can you give me info on:

a) 38

b) 4"

c) round

d) 6

e) fixed

f) 816035 with a P on the other side of the landyard

g) 53602

Thank you
jgstang67 is offline  
Old June 4, 2010, 08:41 AM   #2077
Radagast
Contributing Member
 
 
Join Date: December 24, 2002
Location: Australia/OZ
Posts: 5,082
jgstang67:

The P should actually by an S. Post World War II production of the .38 Military & Police revolver began September 1945 at serial number S811120, utilizing the old prewar long hammer and the new hammer block safety developed during the war. The change to the modern short throw hammer system occurred September 1948 at serial number S990184, so your gun was probably manufactured in late 1945. The presence of a lanyard ring is another indicator of this, as the lanyard was part of the wartime military specification and the first guns produced after the war used up the wartime frames and parts.

Because of the above the early post war guns are sometimes called transitional models and are interesting to collectors. Unfortunately for you this doesn't increase the value, in very good condition your gun is probably worth around $350.

Your gun predates model numbers, in 1957 the .38 Military & Police was designated the Model 10. Over the years there have been several changes to the design, some modern parts will not fit, if you need to repair the gun in the future try Numrich Arms in New York (they have a website) as they buy old guns and strip them for parts.
__________________
$25 a year to keep The High Road on line AND block adds? Bargain!
Become a contributing member today!
http://www.thehighroad.org/payments.php
Radagast is offline  
Old June 4, 2010, 09:51 AM   #2078
shogun7788
Member
 
 
Join Date: June 3, 2010
Posts: 12
.38 Special

4 inch

Square

6

Fixed

AJB08** It also has "E10" markings on the frame and crane.

MOD. 64-3

Thanks.
shogun7788 is offline  
Old June 4, 2010, 09:54 AM   #2079
jgstang67
Member
 
 
Join Date: June 4, 2010
Posts: 5
Radagast: Thank you for the info , thats great stuff. I double checked the letter and it is a "p". ? ? . I would never want to sell it knowing it was my fathers at one time. I would like to have it checked over before I take it to the range as it has been idle for a LONG time. I will check out Numrich Arms. Thank you again!
jgstang67 is offline  
Old June 4, 2010, 10:47 AM   #2080
Radagast
Contributing Member
 
 
Join Date: December 24, 2002
Location: Australia/OZ
Posts: 5,082
jgstang67:

If you can post some high res pics of the markings we will try to identify them for you.

There is a how to check out a revolver thread stickied at the top of this sub forum. If your gun passes it then it will be safe to shoot with standard pressure ammuntion. Limited use of PlusP ammunition should be OK as well, although S&W does not recommend it for guns made before 1957. Stay away from anything marked +P+ as there is no industry standard for the pressure levels in those rounds.
__________________
$25 a year to keep The High Road on line AND block adds? Bargain!
Become a contributing member today!
http://www.thehighroad.org/payments.php
Radagast is offline  
Old June 4, 2010, 10:54 AM   #2081
Radagast
Contributing Member
 
 
Join Date: December 24, 2002
Location: Australia/OZ
Posts: 5,082
shogun778:
Your Model 64-3 .38 Military & Police Stainless dates tro between July 1985 (serial AHTxxxx) & November 1985 (serial ALAxxxx).
AJBxxxx is the serial number, it is the only reference S&W record. The rest of the markings are assembly numbers used to track parts in the factory.
__________________
$25 a year to keep The High Road on line AND block adds? Bargain!
Become a contributing member today!
http://www.thehighroad.org/payments.php
Radagast is offline  
Old June 4, 2010, 11:33 AM   #2082
shogun7788
Member
 
 
Join Date: June 3, 2010
Posts: 12
Thank you!
shogun7788 is offline  
Old June 4, 2010, 12:00 PM   #2083
Seamore2001
Member
 
 
Join Date: August 3, 2009
Posts: 55
I have a J-frame Chief Special Airweight model 37 with a 2" barrel and serial 2750xx. I believe it to be from ~1958 but would like to pin down the DOB.

A bonus question: the box it came with is a S&W two-piece blue cardboard box marked 37 on the end-label. I would like to know if the box is correct for the gun. Additional details on the box label are Special features: "194" and "322", and for serial number it is simply marked "J".
Seamore2001 is offline  
Old June 4, 2010, 12:03 PM   #2084
blackrussian
Member
 
 
Join Date: February 8, 2010
Location: Dallas, Tx
Posts: 139
Thank you very much.
blackrussian is offline  
Old June 4, 2010, 03:19 PM   #2085
geno4243
Member
 
 
Join Date: June 4, 2010
Posts: 2
I am new here can anyone help !My uncle was a police officer years ago and this was his service weapon can you tell me what year it is ? ser. j 376461 Thanks It has Airweight 38 spl ctg smith and wesson
geno4243 is offline  
Old June 5, 2010, 01:55 AM   #2086
ArchAngelCD
Member
 
 
Join Date: November 25, 2006
Location: Northeast PA, USA
Posts: 17,855
Quote:
I am new here can anyone help !My uncle was a police officer years ago and this was his service weapon can you tell me what year it is ? ser. j 376461 Thanks It has Airweight 38 spl ctg smith and wesson
Your uncle's Airweight was manufactured in 1976.
__________________
Remember boys and girls, gun control only prevents law abiding Americans from owning guns because the Bad Guys donít obey the laws, no matter how restrictive or lenient the laws are!
ArchAngelCD is online now  
Old June 5, 2010, 04:56 AM   #2087
Radagast
Contributing Member
 
 
Join Date: December 24, 2002
Location: Australia/OZ
Posts: 5,082
Seamore2001:
Unfortunately I can't give you a year of manufacture for your model 37.
The Standard Catalog of S&W gives states the serial range between 1957 & 1962 was 125000 to 295000, so early 1960s seems more likely. To nail down a shipping date and address you would need to pay $50 to have Roy Jinks, the S&W factory historian look up the original shipping records and send you a letter stating his findings. Such letters can add to the value of rare and interesting guns, but it is unlikely that it will add any value to a run of the mill J frame.

Re the box: The box used from 1954 to 1959 was a blue two piece box with a diamond pattern silver border around the top of the lid, a S&W logo in the upper left corner, 3 silver lines (sun rays) leading from the upper left corner to the lower left corner where the text "Smith & Wesson, Springfield Mass." Runs diagonally across the corner.
Corners were reinforced with metal and the serial number was generally written in grease pencil on the bottom of the box.

From 1957 to 1966 a new blue two piece box was used. Solid silver border around the top of the lid, S&W logo in the top left corner, "Smith & Wesson Inc, Springfield Mass" between two diagonal lines on the bottom right corner. Serial numbers were written on the bottom of the box in grease pencil.

From 1965 to 1985 a similar box to the above, but with "of Bangor Punta" or "A Bangor Punta Company" within the address lines.There was a printed label for the model number, finish and barrel length stuck to the box end.

From 1983 on a one piece box was used.

My guess is that the correct box for your gun is the second variety.

A J prefix to the serial number was used from 1969, so if the box is a Bangor Punta marked box then the box is not original to your gun.

I don't know what 194 & 322 stand for.
__________________
$25 a year to keep The High Road on line AND block adds? Bargain!
Become a contributing member today!
http://www.thehighroad.org/payments.php
Radagast is offline  
Old June 5, 2010, 08:02 AM   #2088
Seamore2001
Member
 
 
Join Date: August 3, 2009
Posts: 55
Radagast -

Thank you very much for the help. The box does appear to be a 3rd type and includes "A Bangor Punta Company" in the address, so not original to the gun. The box style didn't match a NIB 1958 Combat Masterpiece that my wife's grandfather bought new, so that clued me in that something might be wrong, but I wanted to be sure.

And thanks for the advice on the letter - likely not worth it in this case.

Your help was much appreciated.

Seamore
Seamore2001 is offline  
Old June 6, 2010, 03:31 PM   #2089
gilprice
Member
 
 
Join Date: June 6, 2010
Posts: 1
Trying to date a Model 42 I picked up last week, serial number is 13762, any info is greatly appreciated.

Gil in GA
gilprice is offline  
Old June 7, 2010, 07:58 AM   #2090
Radagast
Contributing Member
 
 
Join Date: December 24, 2002
Location: Australia/OZ
Posts: 5,082
Gilprice:

Unfortunately the Centennial Airweight is one of the guns that the Standard Catalog of S&W does not break down the production by year. The following information will help you to narrow its approximate age down.
The original Centennial Airweight was produced from 1952 to 1971 in the serial range 1 to 30160, when an L prefix was added to the serial number. Production ended in 1974.

Stamping of model numbers began in 1957, so your gun was made after that date. If it has a flat cylinder release then it was made in 1966 or earlier. If it has a concave cylinder release it was made in 1966 or later.

If it has the original grips and they are checkered walnut with an uncheckered diamond around the grip screws then it was made in 1968 or later. If it has the original grips and they are checkered walnut with no diamond after the grips screws, then it was made in 1968 or later.

If it has smooth walnut grips they were apparently a standard option for the entire period of production, so they don't help narrow the age down.

With the above you should be able to determine whether it is 1957-1966 or 1966 to 1971, and potentially 1966 to 1968 or 1968 to 1971.

Fun fact, there was a pin stored under the grips that could be used to lock the grip safety down, it may still be there.

Sharing the same serial range as the all steel Model 40 Centennial, approximately 40,000 guns were manufactured over a 32 year period, so they are not the most common of firearms. In 2006 the Standard Catalog of S&W gave a value of $525.00 in excellent condition.
__________________
$25 a year to keep The High Road on line AND block adds? Bargain!
Become a contributing member today!
http://www.thehighroad.org/payments.php
Radagast is offline  
Old June 8, 2010, 05:43 AM   #2091
Oyeboten
Member
 
 
Join Date: March 23, 2008
Posts: 3,696
Hi Radagast..!


Here's a fun one -



.455

6-7/16ths Inch Barrel

Fixed Sights of course


Serial No. 65xxx


Oyeboten is offline  
Old June 8, 2010, 08:58 AM   #2092
Radagast
Contributing Member
 
 
Join Date: December 24, 2002
Location: Australia/OZ
Posts: 5,082
Oyeboten:
You have a .455 Mark II Hand Ejector 2nd Model manufactured between 1915 & 1917. Approximate serial range was 6000 to 74755. Various barrel markings have been observed: "Smith & Wesson .455", "patented Oct. 8, 1901, Dec 17, 1901, Feb 6, 1906", "Smith & Wesson Springfield Mass. USA".
5 screw square butt N frame, lacks the ejector rod shroud of the 1st model.
The grips appear to be original: checkered diamond walnut with a gold S&W medallion.
Lanyard swivel is correct.
59,150 manufactured for England, 14,500 for Canada. 13 commercial guns are known in the 13,000 to 16,000 range.
English guns will probably have English proof marks and "Not English made" stamping. IIRC Canadian guns will probably have crossed banner acceptance marks.

Many of these guns were converted to .45 long colt or .45 Auto Rim after the war.
__________________
$25 a year to keep The High Road on line AND block adds? Bargain!
Become a contributing member today!
http://www.thehighroad.org/payments.php
Radagast is offline  
Old June 8, 2010, 04:54 PM   #2093
Oyeboten
Member
 
 
Join Date: March 23, 2008
Posts: 3,696
Thanks Radagast!


Indeed has some very small stamps here and there of the English Habit, happily, quite few, and not badly done with Ham Fists as one sometimes sees.


Has no 'Not English Make' marking...which is fine with me.


Was indeed converted to .45 Colt at some point.


Looks like it spent it's life mostly in an open top Holster...close to no Muzzle wear, but lots of dings and freckles in the rear Frame and Butt.


Recoil shield has only a very faint Halo barely having interfered with the Blueing.


Mechanics seem supurb...as does Bore.


So....was toward the end of the run then, I guess.


Best wishes!
Oyeboten is offline  
Old June 8, 2010, 08:39 PM   #2094
jgstang67
Member
 
 
Join Date: June 4, 2010
Posts: 5
38 pics requested from previous post

Radagast, do these help ?

Thank you
Attached Images
File Type: jpg 38 smith 004.jpg (210.6 KB, 10 views)
File Type: jpg 38 smith 011.jpg (238.3 KB, 9 views)
jgstang67 is offline  
Old June 9, 2010, 05:05 AM   #2095
Radagast
Contributing Member
 
 
Join Date: December 24, 2002
Location: Australia/OZ
Posts: 5,082
jgstang67:

Now that changes things.

Your serial number is just 816035.

If the barrel is stamped ".38 S&W Special CTG" then you have a .38 Military & Police Model of 1905 4th Change manufactured in 1941 or 1942. This lacks the hammer block safety, which was introduced on late 1944. I would leave the chamber under the hammer empty if the gun is being kept loaded or carried. It does have an earlier internal safety, but this can fail when the gun is dropped - a fatality on a naval vessel during WWII lead to the development of the modern hammer block. The '4th Change' refers to the 4th design change on this model, the early internal safety was part of that design change.
Quality of the steel on this gun would still be good, so limited use of PlusP ammo should be fine.

If the barrel is stamped ".38 S&W CTG" then you have a British Service Revolver manufactured in 1941 or 1942. This was the Model of 1905 4th Change manufactured for England during World War II to chamber their .380 revolver service cartridge, which was based on the early .38 S&W cartridge.
After World War II a lot of these guns were re-imported into the USA, the chambers were bored out to accept .38 Special (a longer cartridge) and they were sold by mail order houses. A converted gun will tend to bulge .38 special brass as the .38 S&W chambers are wider at the rim than the .38 special cartridge.

If the gun lacks English proof marks it is probably originally a .38 special. Another test is to look at the grips, if they are smooth walnut then it was probably a .38 S&W at one time. If they are checkered walnut with S&W medallions then it was probably a .38 Special. Also try inserting a .38 special cartridge half an inch into the chamber - if you can wiggle it from side to side it may be a .38 S&W that has been bored out. If it is a tight chamber it is an original .38 Special. If the .38 special wont chamber then it is an original .38 S&W.

Converted guns have minimal value and it would be prudent to stick to standard pressure ammunition to avoid split cases and gas escaping. An unconverted .38 S&W will have a value lower than an unconverted .38 Special due to the high cost and low availability of ammunition.

Oh, and I have no clue who stamped a P on it. :P
__________________
$25 a year to keep The High Road on line AND block adds? Bargain!
Become a contributing member today!
http://www.thehighroad.org/payments.php
Radagast is offline  
Old June 9, 2010, 07:27 AM   #2096
jgstang67
Member
 
 
Join Date: June 4, 2010
Posts: 5
Radagast : Thank you for the info. The barrel does have the ".38 S&W CTG" stamping. The grips are checkered with gold S&W medallions. I do not have any ammo but I do recall my father saying it was tough to find. (even many years ago) The "P" may have been done by my uncle who worked for S&W and owned the gun at one time ?? . I am going to a gunsmith to have it checked and buy some ammo. Thank you for the heads up on the safety issue,, I will follow your advise. I do not plan on carrying this particular weapon , just neat to own something my father and I shot when I was young.

Last edited by jgstang67; June 9, 2010 at 07:43 AM.
jgstang67 is offline  
Old June 9, 2010, 10:55 PM   #2097
belercous
Member
 
 
Join Date: January 19, 2010
Location: edwardsville, ILL
Posts: 292
O.K., me now please.

I have a model 1905, 4th change, target.
6" bar., .38 spl, square grips, 6 shot, adjustable rear sight, s/n; 6660xx

And is this gun worth a factory letter? It is in pretty good shape with 85%+ finish.
belercous is offline  
Old June 10, 2010, 06:12 AM   #2098
Radagast
Contributing Member
 
 
Join Date: December 24, 2002
Location: Australia/OZ
Posts: 5,082
jgstang67:
You can buy .38 S&W and .380 revolver (also known as 38/200) from Old Western Scrounger online.
Winchester make a good quality .38 S&W load, but only in occasional batches - I believe at one point I had the last two packets of the stuff in Australia.
__________________
$25 a year to keep The High Road on line AND block adds? Bargain!
Become a contributing member today!
http://www.thehighroad.org/payments.php
Radagast is offline  
Old June 10, 2010, 06:41 AM   #2099
Radagast
Contributing Member
 
 
Join Date: December 24, 2002
Location: Australia/OZ
Posts: 5,082
belercous:
Serial number 6660xx places your gun in the period 1935 to 1940.
The Standard Catalog of S&W notes serial number around 651500 shipping in 1935 to the Secret Service and in the 748000 to 760000 range shipping in 1942 to the USA Naval Civilian Police Corps.
If I had to guess I would say 1935 or 1936, but there is no way of proving that without a factory letter. As The High Road's resident guru Old Fuff has pointed out, during that period S&W did not sequentially number and ship guns, frames were manufactured and serial numbered then held until needed. As this was the middle of the depression there may not have been much call for target guns.
A factory letter probably wouldn't add much value to the gun, but it would make it more interesting to a collector if you did need to sell it. I would get the letter to satisfy my curiosity, but not on an expectation that it would be a lotto ticket. :P
Now, if I had a Registered Magnum I would definitely get the factory letter.
__________________
$25 a year to keep The High Road on line AND block adds? Bargain!
Become a contributing member today!
http://www.thehighroad.org/payments.php
Radagast is offline  
Old June 14, 2010, 12:36 AM   #2100
556A2
Member
 
 
Join Date: December 29, 2002
Location: Asheboro, NC
Posts: 604
S&W Model 10-5

.38 Special
4" Pencil Barrel
Square Butt
6 Shot
Fixed Sights
D1097XX
10-5
__________________
Buckshot > Birdshot
556A2 is offline  
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:38 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
vBulletin Optimisation by vB Optimise.
This site, its contents, Shooting Reviews, and its contents are Copyright (c) 2010-2013 Firearms Forum, Inc.
IMPORTANT DISCLAIMER
Although The High Road has attempted to provide accurate information on the forum, The High Road assumes no responsibility for the accuracy of the information. All information is provided "as is" with all faults without warranty of any kind, either express or implied. Neither The High Road nor any of its directors, members, managers, employees, agents, vendors, or suppliers will be liable for any direct, indirect, general, bodily injury, compensatory, special, punitive, consequential, or incidental damages including, without limitation, lost profits or revenues, costs of replacement goods, loss or damage to data arising out of the use or inability to use this forum or any services associated with this forum, or damages from the use of or reliance on the information present on this forum, even if you have been advised of the possibility of such damages.