Quantcast
How sensitive are Primers? - THR
THR  

Go Back   THR > Ammunition, Gear, and Firearm Help > Handloading and Reloading

Welcome to THR
You are currently viewing our site as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have, access to post topics, communicate privately with other members (PM), respond to polls, and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!


If you have any problems with the registration process or your account login, please visit the help section.

Reply
 
Thread Tools
Old December 13, 2003, 06:53 PM   #1
Kestrel
Member
 
 
Join Date: December 26, 2002
Posts: 2,168
How sensitive are Primers?

How easy is it to accidently set off a primer? Things such as accidently stepping on one on a concrete floor, dropping one, etc?

I've never reloaded and am thinking about getting into it.

Thanks,
Steve
Kestrel is offline  
Old December 13, 2003, 07:46 PM   #2
Jeeper
Member
 
 
Join Date: December 28, 2002
Location: Mesa, AZ
Posts: 1,062
primers arent very sensite to stuff like that. THe only time I have set one off accidentally is in a vacumn. who knows if that was heat or static electricity or pressure. The anvil has to be hit normally which is very small.
Jeeper is offline  
Old December 13, 2003, 09:09 PM   #3
Standing Wolf
Member in memoriam
 
 
Join Date: December 24, 2002
Location: Idahohoho, the jolliest state
Posts: 24,041
I've stepped on primers a few times without setting them off.
__________________
No tyrant should ever be allowed to die a natural death.
Standing Wolf is offline  
Old December 14, 2003, 12:21 AM   #4
NavajoNPaleFace
Member
 
 
Join Date: November 7, 2003
Location: Too Dang Hot, Arizona
Posts: 566
The only primer fires I've had were when loading the primer in the primer pocket due to misalignment. And that has only been a couple of times.
__________________
Don't take yourself too seriously or over estimate your importance......no one else is going to. Don't judge without the facts because someone else will surely do that for you. Alan
NavajoNPaleFace is offline  
Old December 14, 2003, 12:25 AM   #5
Black Snowman
Member
 
 
Join Date: September 3, 2003
Location: Kansas City, KS
Posts: 3,507
Several things have to happen to ignite a primer but it can be summed up as a rapid pinch. There are a couple safety features built into a primer to prevent one from going off accidentily.

There's an "anvil" in the primer. A little spring that fits in the cup. It sticks out slightly from the cups edge. When the primer is seated in the primer pocket this anvil is compressed and puts the compound under a slight load. The firing pin hits the center of the primer where the anvil is an the pinch causes enough friction to make the compound ignite.

I have crushed many primers by accident. Usually when I don't set my progressive up correctly. I've seen them mushed sideways, seated upside down, and just generally mangled. Only once did I ever (stupidly) generate enough force to set one off when I tried to seat a 2nd primer on top of an old spent primer (didn't notice the decapping pin had popped up indicating a problem). It resulted in my ears ringing for a few seconds and me tearing apart my press to make sure everything was OK. At which point I correctly set it up so it wouldn't happen again.

It's possible to set a primer off by stepping on it but it would have to be on a hard surface and stepped on with very hard shoes and quite rapidly. Unlikely but possible.

EDIT: It's important to mention that some primers are more sensative than others. I use CCI primers which are netoriously difficult to set off. The one time I had one go off was a Federal, which are netoriously easy to ignite. Now I only use CCI and Winchester and I only use the Winchesters for 10mm.
__________________
Laws don't stop criminals, people do.
Black Snowman is offline  
Old December 14, 2003, 07:50 AM   #6
tbeb
Member
 
 
Join Date: December 30, 2002
Location: Northwest Indiana
Posts: 852
I have never accidentally set off a primer. I have primed cases with the tool on my Lee turrent press and with the Lee auto-prime tool. Primers can be dangerous. Handle them with care and you needn't be afraid of them.
tbeb is offline  
Old December 14, 2003, 05:01 PM   #7
Kestrel
Member
 
 
Join Date: December 26, 2002
Posts: 2,168
What is a primer going off comparable to? A firecracker? I suppose it also depends on if it's a handgun primer, shotgun primer, magnum rifle primer, etc.?

By the way, my interest started by me getting a T/C Encore this weekend. The store said it takes 209 shotgun primers. I've heard of 209, 209A, 209M, but don't know the difference, yet. I'm also planning to get involved in handloading for rifles (.45-70, etc.) I guess the primer handling just had me a little concerned about accidently setting one off...

And Jeeper - I also read about someone that was vacuuming up some gunpowder aroung his workbench. He evidently also picked up a lost primer and it went off in the vacuum, detonating the gunpowder.

What's the best way to clean up gunpowder? I can see that reloading will really take a LOT of care and attention.

Thanks,
Steve
Kestrel is offline  
Old December 15, 2003, 09:37 AM   #8
Peter M. Eick
Member
 
 
Join Date: December 28, 2002
Location: Houston, TX
Posts: 5,035
I have set off 2 primers that I can remember. Both were back in the 70's with a lee hand loader kit. I got to energetic tapping the primers into the case. Both were QUITE loud since I was only about 2 feet from the explosion. They have a lot more power then you would think!

By relative measure It was more then a black cat firecracker they make today for sound.
__________________
10mm and 357SIG, the best thing to come along since the 38 super!
Peter M. Eick is offline  
Old December 15, 2003, 10:52 AM   #9
Black Snowman
Member
 
 
Join Date: September 3, 2003
Location: Kansas City, KS
Posts: 3,507
Cleaning up powder:
Ideally load over a smooth floor and use a broom and dustpan to clean up powder. One of the "push brooms" can work well too. Otherwise a canister vacuum, including the Dust Buster, is relatively safe as the powder won't go through the fan or motor but still riskier than the manual methods.
__________________
Laws don't stop criminals, people do.
Black Snowman is offline  
Old December 15, 2003, 05:16 PM   #10
HogRider
Member
 
 
Join Date: September 10, 2003
Location: Phoenix, AZ
Posts: 458
Just steeped hard on a Small Pistol Magnum Primer with Cowboy Boots and it went off right away!

__________________
HogRider is offline  
Old December 15, 2003, 05:55 PM   #11
Black Snowman
Member
 
 
Join Date: September 3, 2003
Location: Kansas City, KS
Posts: 3,507
Harley Davidson, how did the boots fair? Were you injured at all? I've heard that primers can have enough power to blow off a toe and since you didn't mention that I take it you're OK.
__________________
Laws don't stop criminals, people do.
Black Snowman is offline  
Old December 16, 2003, 01:19 AM   #12
Mike Irwin
Member
 
 
Join Date: December 22, 2002
Location: Below the Manson-Nixon line in Virginia...
Posts: 7,956
They cry if you insult them.

They blow up if you start seeing other primers.
__________________
In the immortal words of Dogbert, I dream of a world in which I can buy alcohol, tobacco, and firearms at the same drive-in window, and use them all before I get home from work.



If the French are your allies, you're better off going it alone.
Mike Irwin is offline  
Old December 16, 2003, 12:21 PM   #13
HogRider
Member
 
 
Join Date: September 10, 2003
Location: Phoenix, AZ
Posts: 458
Lol. No injuries! I stepped on it on purpose after reading this thread, just to see if it would really go off. The was a black spot on the bottom of the boot - nothing else. Now I would say you can't set it off with anything soft - like a sneaker or even bare foot.

Oh, and I wore safety glasses when I stepped on it.
__________________
HogRider is offline  
Old December 16, 2003, 12:39 PM   #14
Zak Smith
Moderator
 
 
Join Date: December 24, 2002
Location: Fort Collins, CO, USA.
Posts: 9,035
I had a primer explode in my Dillon 650 just the other day. I was still getting used to the machine, and it requires a lot less force to seat the primer than my old SDB did.

Anyway, a large pistol primer going off is roughly comparable to a Black Cat firecracker, but with more flame. Definitely wear eye protection and don't put your hand over the case while seating the primer.

-z
__________________
Zak Smith . DEMIGOD LLC . THUNDER BEAST ARMS CORP - COMPETITION DYNAMICS
My PM inbox full? Send e-mail instead.
Zak Smith is offline  
Old December 16, 2003, 12:40 PM   #15
sm
member
 
 
Join Date: December 22, 2002
Location: Between black coffee, and shiftn' gears
Posts: 28,389
Vacuum cleaners are allergic to primers...causes intant death to vacuum, and all kinds of sneaking down hallways, yelling of woman folk and dogs barking...
sm is offline  
Old December 17, 2003, 03:34 PM   #16
GooseGestapo
Member
 
 
Join Date: January 6, 2003
Location: W.GA
Posts: 2,968
SM
I see you've been there done that TOO !!!

(sneakin down halls, dogs barking, women yelling !!! after suspicious explosions in the bullet factory !! aka -shop behind the house).
__________________
In GOD we TRUST, all others are "suspects" !!!
GooseGestapo is offline  
Old December 21, 2003, 05:12 AM   #17
Smokey Joe
Member
 
 
Join Date: January 2, 2003
Posts: 2,615
Sensitive primers

)Mike, you beat me to it! Primers are very new-age, cry easily at others' pain, can't stand the sight of blood, etc, etc.

Seriously, as I understand it, they are sensitive to heavy pressure like a cowboy boot on a concrete floor, and to impact. Impact, after all, is what makes 'em go bang inside the gun's chamber.

There is a story from WW II days that in some armory, a worker was carrying a metal bucket of rifle primers to the machine that seats them in the cartridge cases. He was jouncing the primers up and down in the bucket as he walked. When the dust cleared, they did find one of his feet, that's all.

Personally, though I can't reccommend it, I've vacuumed up both primers and smokeless powder with a hand-held, and with a shop-vac. They all get stopped by the filter bag, and don't get into the whirly parts nor the sparks. (I would NOT risk the same thing with black powder!!)

Once or twice I've accidentally seated a primer sideways in a primer pocket. Takes more pressure than usual, and you'd think I'd have noticed. (Guess I'm just not very sensitive myself! ) Anyhow, saved the cases in question by running them back through the resizing/decapping die, with great care, and with gloves, hearing and eye protection, and the primers, while thoroughly ruined, did not go off during the process.

Have had occasion to get rid of suspect primers, both in cases and out. Using hand, ear, and eye protection, the in-case primers were set off by putting the case in a vise and hitting the primer with a nail-set and a hammer (just like a gun's firing pin). The loose primers were set off by placing on an anvil and hitting with a hammer. Takes a fairly good blow; they don't go off with just a tap.

To sum up: Primers are explosive, and as such must be handled with due caution. Mishandling them can have serious consequences, especially mishandling a large number of them at once. When getting rid of them, protective gear should be worn on hands, eyes, and ears. But when care is used, they can be stored, handled, used, and disposed of safely.
__________________
God Bless America

Smokey Joe
Smokey Joe is offline  
Old December 21, 2003, 10:33 AM   #18
Kamicosmos
Member
 
 
Join Date: December 26, 2002
Location: Kansas City, Missouri
Posts: 2,331
*knocks on wood*

Haven't had any go off yet. I have had a couple get seated sideways and of course being squished in the process.

As far as how loud they are, I primed a couple .44 Mag cases with CCI Mag Primers, I believe, and shot them just to see how loud they are. About like a firecracker, so a bit loud without hearing protection indoors. I was surprised at the amount of sparks that came out the end of teh 5.5 inch barrel of my Redhawk! Good thing I was aiming at a bare concrete floor!
__________________
"Dreams only have meaning because we struggle in the waking world."
-- Major Motoko Kusanagi GitS:SAC

Member: National Rifle Association, Western Missouri Shooters Alliance
Kamicosmos is offline  
Old January 27, 2004, 01:02 AM   #19
artherd
member
 
 
Join Date: December 7, 2003
Location: An Elevated Position in the Bay Area, PRK
Posts: 2,518
Quote:
And Jeeper - I also read about someone that was vacuuming up some gunpowder aroung his workbench. He evidently also picked up a lost primer and it went off in the vacuum, detonating the gunpowder.

The gunpowder, unless it was black powder, would have been no factor.

Smokeless powder will just burn at atmospheric pressure. Kinda slowly.

You can try it (*disclaimer, I bear no responsability if you blow your head off doing this) just put about 1 teaspoon on a cement floor, and touch a (long, fire) match to it. About 2 seconds it takes to burn completely. Little hot flame. Done.


Primers on the other hand ARE an explosive, and a contact one at that. I am MUCH MORE FEARFUL of a bag full of primers than I am of a bag full of smokeless powder.

That said, it takes one hell of a jolt to set one off.
artherd is offline  
Old January 27, 2004, 05:00 PM   #20
g56
Member
 
 
Join Date: January 17, 2004
Location: Oklahoma
Posts: 716
I've been reloading for over 35 years and have never set one off accidentally, and there have been cases of primers being seated sideways, etc. Picking up spilled powder with a vacuum is dangerous, most vacuums run the non filtered air past the motor, which could set the powder on fire, and a lot of vacuums run the air through an impeller fan, which could set off a live primer.

The story of the worker being killed by a bucket of primers is a bit of a reach, in manufacturing ammunition, primers are usually seated while the priming compound is still moist, making it extremely unlikely one could detonate while being seated, in that situation.

I have taken a very small amount of black powder, and a very small amount of smokeless powder and set them on fire, black powder goes off with a big "poof" with a lot of smoke when not contained, smokeless powder burns furiously!
g56 is offline  
Old January 27, 2004, 05:16 PM   #21
P95Carry
Moderator Emeritus
 
 
Join Date: January 3, 2003
Location: South PA, and a bit West of center!
Posts: 16,341
We discussed this sorta topic a while back ....... and most has been answered.

I would tho suggest that the important aspect to primer detonation is impact ... SUDDEN impact. In other words ... tho a generalization .. the energy input must be intense in a temporal sense .... sustained weight for instance will probably not do it ...... it is a sharp tap that does it.

Maybe just now and again a disortion of the whole primer body can produce enough pressure of the anvil on the compound to initiate it.

For what they are .... they are very safe ..... but still need handled with utmost respect. Anyone who wonders about the noise etc .... don safety glasses and whack one with a hammer on an anvil or concrete (at arm's length) ... it is surprising what energy is released.
__________________
Chris - P95. Guns don't kill people - people kill people.
NRA Certified Instructor & NRA Life Member.
Second Amendment Portal - RKBA-2A.com

______________________________
P95Carry is offline  
Old January 27, 2004, 11:11 PM   #22
bigjim
Member
 
 
Join Date: December 28, 2002
Posts: 793
Blew a primer in my Dillon 650 too. Flashed accross the other primers in the wheel and up into the primmer tube setting off 40 more. Split the inner tube and drove the primer follower rod through the roof. The excellent design of the Dillon primer system saved me and directed all the escapeing chunks away from me.

Freaking tight S&B primer pocket.

Dillon refused payment and replace my entire primer system free of charge.

It was loud. Very loud.
bigjim is offline  
Old January 28, 2004, 05:52 PM   #23
boing
Member
 
 
Join Date: December 22, 2002
Location: WNC
Posts: 957
If you drop one, don't let the cat get it, or the dog. Could be a bad play toy.

I spent an hour trying to scrounge up the last missing primer from a spilled 100 count tray of Federals, until I remembered that tray was one short when I opened the box. It was still worth the effort, though.

At the rate I've been mangling primers lately, I'm thinking of wearing ear muffs when I reload. Haven't set one off yet, but...
boing is offline  
Old January 29, 2004, 04:25 PM   #24
Smokey Joe
Member
 
 
Join Date: January 2, 2003
Posts: 2,615
Primers vs. the internals of a vacuum

I beg several of your pardons, but ALL of the modern vacuum cleaners I have ever dismantled, hand-held, shop-vac, canister, and upright, filter the dirt into a bag BEFORE the air goes near a fan or the motor. The dirt would do nasty things to the bearings if it routinely went through the fan, to say nothing of what would happen to an electric motor with dirt, sand, cat hair, etc, passing through it!

The one exception I ever saw was my mother's old vacuum when I was a little boy. It sucked the air and dirt up through a fanÑbut still not through the motor!Ñand blew everything into a large cloth fabric bag which had to be emptied periodically. That fan was made with plenty of clearance for small rocks, etc, which the machine might pick up. Even so, I wouldn't use a vacuum like that for primers.

The only ones I know of nowadays that work that way are the big parking-lot vacuum cleaners. Those you couldn't use inside a house anyhow.

I just can't imagine a scenario in which a primer could be struck sharply enough to be set off in a household vacuum cleaner of modern design. Or exposed to any sparks.
__________________
God Bless America

Smokey Joe

Last edited by Smokey Joe; January 29, 2004 at 05:02 PM.
Smokey Joe is offline  
Old January 29, 2004, 04:46 PM   #25
bigjim
Member
 
 
Join Date: December 28, 2002
Posts: 793
Don't Kirbys run stuff through a fan?
bigjim is offline  
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:20 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2016, Jelsoft Enterprises Ltd.
This site, its contents, Shooting Reviews, and its contents are Copyright (c) 2010-2016 Firearms Forum, Inc.
IMPORTANT DISCLAIMER
Although The High Road has attempted to provide accurate information on the forum, The High Road assumes no responsibility for the accuracy of the information. All information is provided "as is" with all faults without warranty of any kind, either express or implied. Neither The High Road nor any of its directors, members, managers, employees, agents, vendors, or suppliers will be liable for any direct, indirect, general, bodily injury, compensatory, special, punitive, consequential, or incidental damages including, without limitation, lost profits or revenues, costs of replacement goods, loss or damage to data arising out of the use or inability to use this forum or any services associated with this forum, or damages from the use of or reliance on the information present on this forum, even if you have been advised of the possibility of such damages.