Quantcast
.41 Mag Association - Page 19 - THR
THR  

Go Back   THR > Tools and Technologies > Handguns: Revolvers

Welcome to THR
You are currently viewing our site as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have, access to post topics, communicate privately with other members (PM), respond to polls, and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!


If you have any problems with the registration process or your account login, please visit the help section.

Reply
 
Thread Tools
Old January 21, 2013, 08:13 PM   #451
Lerk
Member
 
 
Join Date: January 17, 2012
Location: MN
Posts: 249
Very nice pieces K-Rod and I'd say you're more than worthy with those.

And Boxhead, I'm curious to know more about that one, any background on it?
Lerk is offline  
Old January 22, 2013, 01:48 AM   #452
K-Rod
Member
 
 
Join Date: November 14, 2010
Posts: 305
Thank you Lerk. That Blackhawk though not an Old Model(which I personally prefer), has a story. A friend of mine inherited it when his Father passed on. His father bought it new in 1975 from a LGS in Spokane, Wa. His father also bought the Tasco scope, Weaver no drill/tap base, Weaver rings, RCBS dies & two boxes of ammo at the same time. The Father mounted the scope, shot 90 of 100 rounds & then put it in the safe. It was never shot again. My friend sold it to me about a year ago. I got the way it sits plus the dies, the 90pc of brass that was shot through it & even the remaining 10rds of ammo. I did put those stocks on it to save the Originals. After 35+ years of only being cleaned & oiled, that scope was still dead on. My best group off a rest so far at 25yrds is 1.79" with my handloads & cast boolits. I'm still working with the load. It's an amazing weapon & I'll never part with it!

Boxhead, I'm curious about that interesting looking pistol as well not to mention you Sir take a great picture!
K-Rod is offline  
Old January 23, 2013, 10:08 PM   #453
bigheaddaddy
Member
 
 
Join Date: January 23, 2013
Location: NC
Posts: 8
Add me to the .41 club if there's room for one more.

Started shooting a friend's .41 Redhawk in the early 80's, and now have three .41 Redhawks (blue 5.5", stainess 5.5" and 7.5"), Blackhawk 6.5", Super Blackhawk Hunter 7.5", and a Taurus model 415 2.5" snubby.

I shoot a lot of Berry Plated bullets with Unique, and am considering making the switch to lead from wither Oregon Trail or Missouri, using Unique or 2400. Any suggestions?

bigheaddaddy is offline  
Old January 23, 2013, 10:14 PM   #454
Lerk
Member
 
 
Join Date: January 17, 2012
Location: MN
Posts: 249
Bigheaddaddy, that sounds like an awesome selection, I hope one day I can have that many too

I really like Missouri Bullets .41 215gr Tropper bullet with Universal and Trail Boss (Haven't tried Unique or 2400 with them yet though). No experience with Oregon Trail items.
Lerk is offline  
Old January 24, 2013, 04:09 AM   #455
336A
Member
 
 
Join Date: July 26, 2007
Posts: 924
Welcome aboard bigheaddaddy. As far as Unique and 2400 loads go with the common 215gr SWC bullet I really like 8.5gr of Unique. I was turned on to that load by 1911Tuner who spoke of it back when I started this thread. It is a great load and the one that I use the most. It is easy on the gun and the shooter compared to full magnum loads but will still get the job done, and it is very accurate too.

I don't use 2400 with that bullet as I found a lot of contradicting load data. For full house magnum loads I use 2400 with a Montana Bullet Works H&G 215gr SWC. This is an awesome load with lots of power and accuracy, the bullet is a true Keith bullet, and was designed by Keith himself for the .41. The bullet is expensive but worth it IMHO. If you can find them another good bullet is the 230gr Keith made by Dry Creek Bullet works. He made a run of them not long ago but he may have sold out of them.
__________________
If numbers killed I'd be hunting with a calculator
336A is offline  
Old January 24, 2013, 05:10 AM   #456
41 Mag
Member
 
 
Join Date: January 22, 2005
Location: Texas - Born and Raised
Posts: 1,437
Quote:
For full house magnum loads I use 2400 with a Montana Bullet Works H&G 215gr SWC. This is an awesome load with lots of power and accuracy, the bullet is a true Keith bullet, and was designed by Keith himself for the .41. The bullet is expensive but worth it IMHO. If you can find them another good bullet is the 230gr Keith made by Dry Creek Bullet works. He made a run of them not long ago but he may have sold out of them.
I will second the Montana H&G 215, it is an awesome bullet, and if you pour your own, do yourself a favor, look at this post
MP-molds / MiHec molds on hands nov/dec 2012
and get one of the 41*HG*258*4*CAV*HOLLOW*POINT*BRASS. You WILL NOT be disappointed in the least. Click on the listing and it will take you to the original thread on the group buy and usually show the bullet and or dimensions. It might be a bit pricey, but they are a Cadillac of molds, and you DEFINITELY get what you pay for.

It comes with HP pins and blank pins so you can make either one or both at the same time. They throw bullets like nobodies business. One thing on the pins, if you use the "penta" pins you will need to run it a bit hotter for them to drop effectively, so don't get upset if they stick a bit. The MP molds in the H&G numbers have also been made as close to the original dimensions as possible. As such the first driving band on some of the Keith type MIGHT be an issue on some revolvers depending on the cut of your cylinder chambers. Haven't seen it in my Ruger or my friends S&W 657 but these are only two out of many out there.

Also for loading the Montana or the above, my friend and I have found that AA-5, 7, & 9 work VERY well with that design for a WIDE range of loads. Dry Creek also uses a Keith mold and also has a great heavy weight as mentioned. There is a write up on them here,
Dry Creek Bullets Works 230gr 41 Keith

and another decent write up here on the 41, quite possibly by one of the fellow 41'ers here,
Thread: The misunderstood .41 Magnum

Loved the read and pretty much agree with your input on the loads you tried out. I have stuck to the 200-220 gr loads for most everything with the 200gr Remington SJHP being the most used until recently. I REALLY loved that old 170gr Rem and had I known they were going to drop it I would have scarfed up a supply ahead of time. I still have a few but nothing that will last long. That said I am in on a group buy waiting list for a MP mold which will throw a 170'ish grain HP so things might be looking up for the lighter load.

If any one of you pick up one of the MP molds, I'm warning you ahead of time, start putting away for another one, they are like the guns you will use them for, you get one and you just gotta have another.
__________________
LAter,
41 Mag

41 Mag's - Photobucket Page
41 Mag is offline  
Old January 24, 2013, 09:19 PM   #457
bigheaddaddy
Member
 
 
Join Date: January 23, 2013
Location: NC
Posts: 8


The 41 Redhawk and it's 41 Blackhawk brother. 2 great shooters.

bigheaddaddy is offline  
Old February 11, 2013, 04:06 AM   #458
Hawaii Guy
Member
 
 
Join Date: February 11, 2013
Location: Oahu, Hawaii
Posts: 5
Aloha from Hawaii

How I managed to miss this thread is beyond me.

Very few of us 41 mag fans here in Hawaii that I know of.

Here's Most of my 41s



What's missing are my 2 Marlin 1894s in 41.
One being the Marlin 41 Cowboy Special

Haven't been shooting much due to health and range problems.

Not to mention the political situation here.

I do have at least 6 or more boolit molds for the 41.

We recently moved to a new place and I have not been able to set

up my Reloading bench yet. Soon I hope.
Hawaii Guy is offline  
Old February 11, 2013, 07:28 PM   #459
336A
Member
 
 
Join Date: July 26, 2007
Posts: 924
Nice collection Hawaii Guy.
__________________
If numbers killed I'd be hunting with a calculator
336A is offline  
Old February 13, 2013, 02:18 PM   #460
336A
Member
 
 
Join Date: July 26, 2007
Posts: 924
Hello all, I found a article by Brian Pearce that I haven't seen before. I always seem to miss the articles that Mr. Pearce writes on the .41 Mag, and as usual there is some good load data with it.
http://buffalobore.net/HandloaderFeb2003.pdf

Anyone else have any articles by Mr. Pearce that they can share?
__________________
If numbers killed I'd be hunting with a calculator
336A is offline  
Old February 13, 2013, 04:53 PM   #461
fatcpa
Member
 
 
Join Date: December 24, 2009
Location: Oklahoma
Posts: 134
A question for you 41ers. I have single action Rugers in 45 colt and 357. I have a S&W model 629 with a 4 inch barrel. I reload for all of them and probably get as big a kick out of reloading as I do shooting. Due to age and bad back and knees my shooting is pretty well confined to shooting paper. To mix things up a little I shoot a lot at ranges between 50 and 75 yards. Given all this, help me justify adding a 41 mag. I know that "because I want one" is plenty justification, but a little fortification doesn't hurt! I'm not a "collector" so I buy guns to shoot, not lock away in the safe.
fatcpa is offline  
Old February 14, 2013, 09:21 AM   #462
Walkalong
Moderator
 
 
Join Date: November 20, 2006
Location: Alabama
Posts: 35,902
Go for it, you won't be sorry.

No one in this thread will say nay nay, that's for sure.
__________________
Do you ever wonder why nobody ever robs the bag man for the mob? No, you don't.

"Oh bother" said Pooh, as he chambered another round. Author unknown.
Walkalong is offline  
Old February 14, 2013, 09:34 AM   #463
22-rimfire
Member
 
 
Join Date: June 11, 2005
Location: TN
Posts: 10,498
Fatcpa, it is logical in my opinion to consider a 41 magnum revolver at this point. You may find that you may shoot it better than the others. Give it a shot. Others would simply say that you can get everything the 41 mag gives you by adjusting your loads in a 44 mag.
22-rimfire is offline  
Old February 14, 2013, 06:33 PM   #464
OldTex
Member
 
 
Join Date: February 1, 2012
Posts: 106
And here I thought I was all alone with my .41s ............

Redhawk


and Model 57


And while we're at it, Marlin 1894S and Cowboy Limited
OldTex is offline  
Old February 15, 2013, 02:56 PM   #465
Crunchtyme
Member
 
 
Join Date: February 28, 2012
Posts: 1
These 41 mags will lead to my ruin,
I have a T/C Contender 10" that I purchased in 1982, a 6" Blackhawk ( 1981), and a 4 5/8 magna-ported Blackhawk , all in 41 mag.

I am in the Spokane area this week, wouldn't you know it , right after purchasing an Encore, I come a cross a Stainless Blackhawk hunter in 41 mag , and yet another Blued Blackhawk, 6".

Why couldn't I find these 24 hours sooner.

I did locate a full unopened box and a partial box of Speer 4417 220, grain 3/4 jacket bullets. I have sorely missed those. Cant wait to back to the wet side of the state and load some up.

I do like eastern Washington more and more, waking up to 30 deer and 20+ turkey in the yard, make my trigger finger itch.
Crunchtyme is offline  
Old February 15, 2013, 04:55 PM   #466
ditmo
Member
 
 
Join Date: February 15, 2013
Location: Denver Metro
Posts: 3
Just joined the forum and saw this thread. I'd like to join the .41 mag association. My credentials are:

Blackhawk 6.5"
Blackhawk 4.75"
S&W 57 4"
S&W 57 (Mountain Gun)
S&W 657 6"
Dan Wesson 741 w/ 4 bbls

.41 mag is my favorite handgun cartridge. Mild to wild and very accurate.
ditmo is offline  
Old February 16, 2013, 03:16 PM   #467
Domino300
Member
 
 
Join Date: August 2, 2009
Location: NC Ohio
Posts: 84
Welcome Ditmo, nice collection!
Domino300 is offline  
Old February 16, 2013, 06:52 PM   #468
foxs
Member
 
 
Join Date: February 12, 2013
Posts: 63
count me in.
foxs is offline  
Old February 16, 2013, 08:25 PM   #469
Domino300
Member
 
 
Join Date: August 2, 2009
Location: NC Ohio
Posts: 84
Whatcha got, Foxs?
Domino300 is offline  
Old February 16, 2013, 10:05 PM   #470
Mac2
Member
 
 
Join Date: April 10, 2010
Location: Western NC
Posts: 81
This is mine. It was my Dad's that I inherited. I had the full engraving done by Jim Downing, who did a fantastic job. There's some personal engraving that I won't get in to. He had this in the 70's, it's one of the early. Us kids had it Magna-ported for him one year for Christmas (late 70's) 'cause it barked more than the .44. It's still a shooter and turns heads at the range. One of my most prized possessions.
Attached Images
File Type: jpg IMG_1419.jpg (146.2 KB, 26 views)
Mac2 is offline  
Old February 16, 2013, 10:29 PM   #471
blkbrd666
Member
 
 
Join Date: April 1, 2008
Location: Georgia
Posts: 1,301
Is a "slightly" modified S&W recoil-less .41 invited to this party?
Attached Images
File Type: jpg S&W .41 Magnum.JPG (135.9 KB, 33 views)
blkbrd666 is offline  
Old February 17, 2013, 07:47 AM   #472
RJM52
Member
 
 
Join Date: March 6, 2006
Posts: 28
Boxhead's gun on the previous page is a 3" Lew Horton Special...one of about 150 made. The 3" guns made back in 1986 with the 1/2 underlug are often advertised as LH guns but are not...they were just an uncatalogued stocking dealer special run.

666....!!! What did you do to the GUN!!!???

Mac...that is a NICE Blackhawk...I have one like that with the Super Blackhawk gripframe...gives the gun a whole different balance and feel. One day I would like to put a SBH gripframe on the Flat Top I have...





Carbines...Marlins now START at a grand and work up. A few weeks ago I saw a FG (pistol grip stock) sell for $1600+ on GunBroker. Last time I saw a 16.5" stainless LTD sell it was $1350 but that was a year ago easy...no one sells them. It is insane.

I have three...CCL 20" octagon, 1894S and a LTD....great shooters....





50 yards sitting....255 CPBC with 22.0 H110...







1894P/.44 Magnum I had with the .41/LTD





1894 Scout setup...





Would be nice if TALO or Davidsons would make another run of these...would love to see an 18" stainless with a straight black/gray laminated stock.

Bob
RJM52 is offline  
Old February 17, 2013, 10:00 AM   #473
41 Mag
Member
 
 
Join Date: January 22, 2005
Location: Texas - Born and Raised
Posts: 1,437
Quote:
.41 MAG, have you ever recovered any of those Rem 200gr SJHP bullets? if so could you post a pic. Also where does one find loading info for that specific bullet? I've been thinking about giving this bullet a whirl just for giggles.
336A,

I might have already answered you with a PM but don't remember. For load data I simply use the loads listed for the 210gr on Hodgdon's site. Primarily I use 20.5grs of 296 in Starline cases lit with Win-WLP primers. I seat them so that I have just a slight roll into the bottom edge of the cannalure. I have found that the case tension, coupled with the very slight roll crimp goes hand in hand with accuracy. Too many times I have seen rolled crimps that were severely overboard, and can't be good for an accurate load. This pic shows the difference between a slight roll and a tight roll. Both groups were shot free hand at 40yds, and all loads were identical, with only the crimp being lessened on the right hand side. It should have been a tighter group that what it was but I simply wasn't used to the trigger on my friends 657. It's a bit sweeter than the one on my RH for sure.


As for pictures of recovered bullets, I don't have any of them, as I usually don't get any back. I only recently began to try and catch what I shoot to reuse the lead, and the 200's are used for hunting and I haven't shot any since I started pouring lead. They shoot great however, hit hard, and usually drop things right on the spot. My close friend and I have dropped several hogs in the 200# range at distances out to over 100yds with them, and it is amazing how flat they really shoot, and how hard they hit out that far. Even there we get a pass through when the shot goes where it is supposed to go.

As of late I have been slowly gravitating more and more towards the cast side of things. I already have a couple of molds from Lee and the AWESOME MP brass ones. The MP 41-HG 258, as mentioned above is an awesome mold and has shown remarkable accuracy with a couple of different alloys. The first group I shot with them in the straight flat nosed SWC version,was simply a one hole group. It hit high left of my target, not being sighted in for them, and I had to hold over to keep form blowing the bucket apart. Still I put 4 rounds in an area which could almost be covered by my thumbnail at 25yds.

I'm on two other group buys for this caliber right now with one being the Lite 41 which hopefully will replicate the 170gr Rem to some degree, and another in the venerable "640" configuration. I already have the .452 version as well as the .432 version, and am waiting arrival of the .359, so I figured I might as well bite the bullet, (pun intended) and have a full set.

One thing about these molds, while they might be a bit high, you get what you pay for #1, and you have the options usually to pour up 3-4 different bullets form the same mold. They usually come with a small, large, and sometimes penta HP pin as well as the blank for pouring FN versions.

Anywho nuf rambling for now I got work to do, lead to melt, and bullets to sort through. OH whoa is me......
__________________
LAter,
41 Mag

41 Mag's - Photobucket Page
41 Mag is offline  
Old February 17, 2013, 06:08 PM   #474
336A
Member
 
 
Join Date: July 26, 2007
Posts: 924
Thanks .41 Mag, I believe your right though and answered that question for me a few posts back but thats ok. I've just been given the ok to start casting from the better half the other day I've decided that when funds allow I'm going to invest in a Ballisti-cast Kieth mold #858. After much research and reading I've come to share the same opinion as Mr. Fryxell in one of his chapters "From Ingot to Target". Mr. Fryxell describes the #429421 bullet as the "Last Word" in cast revolver bullets; but I think that description is shared by all of Keith's designs as they all share the same traits.
__________________
If numbers killed I'd be hunting with a calculator
336A is offline  
Old February 18, 2013, 01:00 AM   #475
ahandgunner2
Member
 
 
Join Date: February 27, 2011
Location: PA
Posts: 48
OK, I'm just now seeing this thread...and read all 19 pages...and I want in on the fun! I figure we should stop once we get to 410 members

.41 has always been my favorite caliber...started with the Nickel 58 (S) and went from there. In fact, i only started handloading because shooting the 41 was too expensive...now I reload for all pistol cartridges. Casting bullets will be my next step.

I have several 58's...including a beater nickel one I carry hunting, camping, mountain trips, etc., a NIB Nickel (non S), and several Blue.

Also, 8-3/8" 57, 6" 57 (my shooter), Taurus 415 (good carry gun), Desert Eagle, and an 1894FG. And yesterday I added a nice Blackhawk w/ 6-1/2".

Oh, and let's not forget my various 41 Contenders...

Doesn't hold a candle to ko's collection, but I do love them!

I'd like to ressurect the question as to shotshells. The only reason I have to carry my 357 or 44 is for snake loads while at my cabin...anyone else make shotshells out of 41? Or can anyone make plastic caps??
ahandgunner2 is offline  
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:46 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
vBulletin Optimisation by vB Optimise.
This site, its contents, Shooting Reviews, and its contents are Copyright (c) 2010-2013 Firearms Forum, Inc.
IMPORTANT DISCLAIMER
Although The High Road has attempted to provide accurate information on the forum, The High Road assumes no responsibility for the accuracy of the information. All information is provided "as is" with all faults without warranty of any kind, either express or implied. Neither The High Road nor any of its directors, members, managers, employees, agents, vendors, or suppliers will be liable for any direct, indirect, general, bodily injury, compensatory, special, punitive, consequential, or incidental damages including, without limitation, lost profits or revenues, costs of replacement goods, loss or damage to data arising out of the use or inability to use this forum or any services associated with this forum, or damages from the use of or reliance on the information present on this forum, even if you have been advised of the possibility of such damages.