A THR knife PICTURE thread?!?! - Page 7

Yo Mama · September 25, 2011, 09:22 PM

jeepnik, who was the maker of that blade? Handle is beautiful.

**ArfinGreebly** · September 25, 2011, 10:23 PM

If I'm not mistaken, that's a John Schulps piece.

Here are some others by him. Similar stylings.

His obit is here.

jeepnik · September 27, 2011, 05:42 PM

Yes, it's a Schulps. I have quite a few. He was as interesting a man as his knives were. I used to see him yearly at a local Renaisance Faire. We'd talk while the rest of the group wandered around. It just isn't the same now.

Yo Mama · October 1, 2011, 04:30 PM

I finally got my new Endura ffg from my Wife! Pics include the obligatory side shot with the saber ground.

Came sharp as hell, put a pic of the nic I got playing around looking at it. Barely touched me, made us blood brothers (last pic).

T.A.DAVISON knife maker · October 12, 2011, 02:31 PM

Here is my 800 hundreth Slip Joint Knife made and sold.

Thanks for the looks.

Todd

And one more for ya to look at........

.

DAdams · October 25, 2011, 03:24 PM

Native and Morakniv

T.R. · October 25, 2011, 07:48 PM

This is one of my favorite hunting knives. FROST Cutlery (imported from China) with custom made leather sheath. Overall length 8.25 inches.

Grade of steel is an unknown but its stainless never the less. It holds an edge well enough to skin two deer before re sharpening on angled cermic sticks. The large handle and blade shape are TOPS!!

TR

Pete D. · October 26, 2011, 06:16 AM

Three utility knives that I made last year:

A little sheepsfoot:

A cousin:

A dropped edge with Osage Orange scales and silver and brass bolster:

Pete

tallpaul · October 26, 2011, 07:41 AM

OOOOH Knives, pre y2k I started searching for GOOD knives and was rapped up hard in that hobby for several years. I am not as active but manage to buy a few every now n again in between high end airgun and firearm acquisitions.

I actually came up with a unique graphic for the Chris Reeve Sebenza back in 2000 that actually means quite a bit to me and a few others called the Calvary Sebenza, my small part in knife history. I like CRK stuff A LOT...

with friends

some of my other favorites

someone say Kukri?

How a bout a VERY LIMITED Ghurka House WWIII with white micarta handles and blue blade with the kick but custom kydex sheath

yes I kinda got in deep and have a bunch of or have had a bunch of benchmade n spyderco and camilus blades I like n use and have given away to the knife poor friends who refused to buy anything better than the chinese counter knives for 5.00- it drove me crazy!

EGGMAN240 · October 26, 2011, 06:45 PM

Here's my small collection:

HTM Madd Maxx 5.5 on top (Assisted)

Then from left to right:
Extrema Ratio Black Talon
Extrema Ratio Nemesis
Extrema Ratio MF2
Extrema Ratio MF3 Ingredior Tanto
Boker Applegate Folding Dagger
Gerber Applegate Combat Folder

Coldsteel Ti-lite 6" on the bottom

Smallest knife is the Boker at 9.75". I like 'em large...

Searcher1970 · October 28, 2011, 12:07 PM

My modest collection of Kinfolks.

AuthorityDenied · October 29, 2011, 04:30 AM

Just got this Ontario 18" machette at a local army-navy store.

**hso** · October 29, 2011, 09:13 AM

Sole "authorship" by Kim Breed. Ivory, damascus, filework.

Yo Mama · October 29, 2011, 09:14 AM

^Nice, but looks like you'll need a kydex sheath.

Mod Edit
You were referring to the Ontario Machete, yes?

**hso** · October 29, 2011, 04:47 PM

Quote:

you'll need a kydex sheath

That would be like putting WallyWord floor mats in a Bentley. No, I think a nice ray skin sheath will need to be made.

nevermas · October 31, 2011, 01:55 PM

hso, can you post it again, picture isn't loading.

Shot of my recent EDC rotation:

G.WHEELERKNIVES · November 5, 2011, 10:13 AM

Hey HSO

Kim has enough ideas without you giving him ideas, you know who will have to make that sheath.. Working on my carving ability's for it right now, getting tired of having someone else do it for me...

Hey guys been lurking around the site and you all have some great collections, enough cut to sink a boat/////

**hso** · November 5, 2011, 11:00 AM

Well, lookee there. Mr. Wheeler has shown up.

Gents, Gary is an ABS JS smith and a good buddy of mine that makes great knives. Msgt (ret) from 5th group so he knows which end is the pointy one (other than his head) and does pretty work.

**bikerdoc** · November 6, 2011, 01:29 PM

Welcome Mr. Wheeler.

Guys,
I own a knife he made. Top notch craftsmanship from "one of us"

DammitBoy · November 6, 2011, 01:48 PM

Quote:

Originally Posted by kamagong

Hiroaki Ohta wharncliffe

Love the grips on your pistol, where can I find them?

**hso** · November 6, 2011, 04:06 PM

Inferno #1

451 Detonics · November 6, 2011, 04:55 PM

I need to find someone who can do a nice leather pocket sheath for this small pocket bowie...

**hso** · November 6, 2011, 05:26 PM

Mr. Wheeler who just signed on can.

Berkley · November 6, 2011, 06:42 PM

Quote:

How a bout a VERY LIMITED Ghurka House WWIII with white micarta handles and blue blade with the kick but custom kydex sheath

-tallpaul

You don't see many WWIIIs around, that's for sure.

AuthorityDenied · November 7, 2011, 11:31 AM

New handle wrap on my Boker Nealy Tanto

September 25, 2011, 10:23 PM	#152
ArfinGreebly Moderator Join Date: October 10, 2006 Location: North Idaho Posts: 11,248	John Schulps? If I'm not mistaken, that's a John Schulps piece. Here are some others by him. Similar stylings. His obit is here. __________________ Daughter: "Dad, how do I know who's a real friend?" Me: "A friend is someone who cares how your life turns out." "Truth is a dangerous thing: once found, you must never turn your back on it." -- gh@c2 "Look at it this way. If America frightens you, feel free to live somewhere else. There are plenty of other countries that don't suffer from excessive liberty. America is where the Liberty is. Liberty is not certified safe." -- gh@c2

September 27, 2011, 05:42 PM	#153
jeepnik Member Join Date: September 25, 2011 Location: SoCal Posts: 730	Yes, it's a Schulps. I have quite a few. He was as interesting a man as his knives were. I used to see him yearly at a local Renaisance Faire. We'd talk while the rest of the group wandered around. It just isn't the same now. __________________ Go low, go slow, and preferrably in the dark.

October 12, 2011, 02:31 PM	#155
T.A.DAVISON knife maker Member Join Date: January 31, 2009 Location: Kosciusko, Mississippi Posts: 166	Here is my 800 hundreth Slip Joint Knife made and sold. Thanks for the looks. Todd And one more for ya to look at........ . __________________ T.A. DAVISON custom knives http://www.tadscustomknives.com/

October 25, 2011, 07:48 PM	#157
T.R. Member Join Date: January 23, 2006 Location: Lancaster County, Pennsylvania Posts: 1,181	This is one of my favorite hunting knives. FROST Cutlery (imported from China) with custom made leather sheath. Overall length 8.25 inches. Grade of steel is an unknown but its stainless never the less. It holds an edge well enough to skin two deer before re sharpening on angled cermic sticks. The large handle and blade shape are TOPS!! TR __________________ Fire up the grill! Hunting IS NOT catch and release!

October 26, 2011, 06:45 PM	#160
EGGMAN240 Member Join Date: March 11, 2009 Posts: 102	Here's my Collection Here's my small collection: HTM Madd Maxx 5.5 on top (Assisted) Then from left to right: Extrema Ratio Black Talon Extrema Ratio Nemesis Extrema Ratio MF2 Extrema Ratio MF3 Ingredior Tanto Boker Applegate Folding Dagger Gerber Applegate Combat Folder Coldsteel Ti-lite 6" on the bottom Smallest knife is the Boker at 9.75". I like 'em large...

September 25, 2011, 09:22 PM	#151
Yo Mama Member Join Date: June 4, 2008 Posts: 2,207	jeepnik, who was the maker of that blade? Handle is beautiful.

October 26, 2011, 06:16 AM	#158
Pete D. Member Join Date: September 13, 2010 Posts: 1,249	Three utility knives that I made last year: A little sheepsfoot: A cousin: A dropped edge with Osage Orange scales and silver and brass bolster: Pete

October 26, 2011, 07:41 AM	#159
tallpaul Member Join Date: October 17, 2006 Posts: 398	OOOOH Knives, pre y2k I started searching for GOOD knives and was rapped up hard in that hobby for several years. I am not as active but manage to buy a few every now n again in between high end airgun and firearm acquisitions. I actually came up with a unique graphic for the Chris Reeve Sebenza back in 2000 that actually means quite a bit to me and a few others called the Calvary Sebenza, my small part in knife history. I like CRK stuff A LOT... with friends some of my other favorites someone say Kukri? How a bout a VERY LIMITED Ghurka House WWIII with white micarta handles and blue blade with the kick but custom kydex sheath yes I kinda got in deep and have a bunch of or have had a bunch of benchmade n spyderco and camilus blades I like n use and have given away to the knife poor friends who refused to buy anything better than the chinese counter knives for 5.00- it drove me crazy!

October 28, 2011, 12:07 PM	#161
Searcher1970 Member Join Date: October 28, 2007 Location: Minnesota Posts: 202	My modest collection of Kinfolks. __________________ A change has come over the country, one which cannot be viewed by patriots with anything other than alarm. Dr/Capt. William Wallace McMillan 17th Alabama Infantry, Company "H" "The Scotland Invincibles"

October 29, 2011, 04:30 AM	#162
AuthorityDenied Member Join Date: October 10, 2010 Location: NY's Capital District Posts: 105	Just got this Ontario 18" machette at a local army-navy store.

October 29, 2011, 09:14 AM	#164
Yo Mama Member Join Date: June 4, 2008 Posts: 2,207	^Nice, but looks like you'll need a kydex sheath. Mod Edit You were referring to the Ontario Machete, yes? Last edited by ArfinGreebly; October 31, 2011 at 10:49 PM. Reason: clarification

October 31, 2011, 01:55 PM	#166
nevermas Member Join Date: May 1, 2010 Location: Tampa, FL Posts: 125	hso, can you post it again, picture isn't loading. Shot of my recent EDC rotation:

November 5, 2011, 10:13 AM	#167
G.WHEELERKNIVES Member Join Date: October 10, 2011 Location: Tennessee Posts: 36	Hey HSO Kim has enough ideas without you giving him ideas, you know who will have to make that sheath.. Working on my carving ability's for it right now, getting tired of having someone else do it for me... Hey guys been lurking around the site and you all have some great collections, enough cut to sink a boat/////

November 5, 2011, 11:00 AM	#168
hso Moderator Join Date: January 3, 2003 Location: 0 hrs east of TN Posts: 33,540	Well, lookee there. Mr. Wheeler has shown up. Gents, Gary is an ABS JS smith and a good buddy of mine that makes great knives. Msgt (ret) from 5th group so he knows which end is the pointy one (other than his head) and does pretty work. __________________ SAF Life Member/NRAILA Contributor **************** Please Read The Forum Rules** TheHighRoad exists to provide a higher grade of discussion than is found on some other gun forums so antis and undecideds can see that gun owners and RKBA advocates are not the reckless misanthropes they tell everyone we are. Personal attacks, group stereotyping, macho chest-thumping, and partisan hackery are low road and hurt all of us.

November 6, 2011, 01:29 PM	#169
bikerdoc Moderator Join Date: January 8, 2008 Location: Southern Virginia Posts: 8,774	Welcome Mr. Wheeler. Guys, I own a knife he made. Top notch craftsmanship from "one of us" __________________ I only have so many heartbeats left. I am not wasting them on things that are not fun. VCDL, member, Curmudgeon A good hit with a marginal bullet is better than a marginal hit with good bullet. – Tom Givens

November 6, 2011, 04:55 PM	#172
451 Detonics Member Join Date: January 4, 2011 Location: Indiana Posts: 2,442	I need to find someone who can do a nice leather pocket sheath for this small pocket bowie... __________________ Tergum absentis vir , EGO sum scientia

November 6, 2011, 05:26 PM	#173
hso Moderator Join Date: January 3, 2003 Location: 0 hrs east of TN Posts: 33,540	Mr. Wheeler who just signed on can. __________________ SAF Life Member/NRAILA Contributor **************** Please Read The Forum Rules** TheHighRoad exists to provide a higher grade of discussion than is found on some other gun forums so antis and undecideds can see that gun owners and RKBA advocates are not the reckless misanthropes they tell everyone we are. Personal attacks, group stereotyping, macho chest-thumping, and partisan hackery are low road and hurt all of us.

November 7, 2011, 11:31 AM	#175
AuthorityDenied Member Join Date: October 10, 2010 Location: NY's Capital District Posts: 105	New handle wrap on my Boker Nealy Tanto