Quantcast
Remington ………the revolver of choice - THR
THR  

Go Back   THR > Tools and Technologies > Blackpowder Shooting

Welcome to THR
You are currently viewing our site as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have, access to post topics, communicate privately with other members (PM), respond to polls, and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!


If you have any problems with the registration process or your account login, please visit the help section.

Reply
 
Thread Tools
Old June 11, 2014, 11:51 AM   #1
Crawdad1
Member
 
 
Join Date: September 13, 2012
Location: Pennsylvania
Posts: 1,076
Remington ………the revolver of choice

Referring to the Hege revolvers that are from Germany, their advertising literature is now listed them as the “Hege – Uberti” revolver. People are saying that the ones presently offered are being built by Uberti and ‘tuned’ by Hege. Is this the story or are there others?
I know from experience that the Remington is the revolver of choice by competitive shooters but is this Hege Remington worth the asking price?
There are other less expensive options though, Pedersoli is offering a “Match grade” Remington while Pietta has always offered their “Target” model Remington with the rear adjustable sights and Euroarms, has offered in the past a Remington with a “Match” grade barrel. Are any of these options better than the new Hege revolver and has anyone seen matches where these revolvers are pitted against each other.

Granted, one Hege against one “Match Grade” Pedersoli Remington against one “Match Grade” Pietta Remington isn’t really going to prove anything. That competition will just prove that the one specific revolver can best the other two specific revolvers, but has anyone who is into these competitions seen these revolver go up against each other consistently and if they have is the German Hege Remington really, “The World’s Best”
Crawdad1 is offline  
Old June 11, 2014, 12:19 PM   #2
Old Fuff
Member
 
 
Join Date: December 24, 2002
Location: Arizona
Posts: 21,912
If you buy a less costly "standard" revolver the two factors that most affect accuracy are chambers that are misaligned with the bore, and/or have chambers that are undersized and swage the ball/bullet smaller then the groove diameter of the barrel. After that it's a matter of fine tuning.

Matches can be decided by a matter of a few points (sometimes no more then one) so serious competitors don't compromise when it comes to equipment. I am no longer shooting in tournaments, but I do like my revolvers (of all kinds) to be a accurate as possible - at least within reason.

The best cap & ball revolvers can interlock holes in a tight group at 50 yards or meters, but to do this the price is relatively high. So the question is, "Is this level of accuracy important enough to you to pay the price?"

That said, if almost is close enough, consider buying a used Ruger Old Army for less money.
Old Fuff is offline  
Old June 11, 2014, 01:11 PM   #3
Crawdad1
Member
 
 
Join Date: September 13, 2012
Location: Pennsylvania
Posts: 1,076
Thanks Old Fuff!!!
I don't particularly care for the Ruger as it cannot be used in these competitions. But, I have to hand it to the Remington design though, most use a Remington in these competitions.

I really hated saying that as I love my Colts!!!
Crawdad1 is offline  
Old June 11, 2014, 01:27 PM   #4
Old Fuff
Member
 
 
Join Date: December 24, 2002
Location: Arizona
Posts: 21,912
Quote:
I really hated saying that as I love my Colts!!!
Oh I do too... But they wouldn't be my first choice to shoot in serious competition. The lip on the hammer doesn't make a good location for a rear sight, and moving it up to the back end of the barrel shortens the sight radius. Also it's harder to find an economy replica that doesn't have at least one chamber that doesn't line up with the bore. Add to that a very common problem with undersized chambers vs. barrel groove diameter. But this of course can be corrected.

My main point is that serious match competitors need to be picky, and pay the price. This is not necessarily the case when tin cans are most often the target.

Also keep in mind that Colt was the originator. Remington and other didn't offer a revolver until Colt's basic patents expired. Thus they could look backwards at the weak points in the Colt design. On the other hand the open-top Colt's had a better reputation for functioning after firing two or more cylinder loads without cleaning. In the 19th century this was often considered to be more important then maximum accuracy.

Last edited by Old Fuff; June 11, 2014 at 01:35 PM. Reason: Added last paragraph.
Old Fuff is offline  
Old June 11, 2014, 03:33 PM   #5
zimmerstutzen
Member
 
 
Join Date: July 30, 2009
Location: banks of the Susquehanna
Posts: 902
Many years ago, I met an old gunsmith, who specialized in tuning silly wet revolvers. He went to the factories and went through dozens of guns to pick out candidates for the treatment. Then he got them to his shop and began the work.
He let me take a few shots with one of his finished project before it went to the customer. &
He had me hitting clay birds on the hundred yard backstop. With a one hand hold I kept them in the black at 100.

Shooting a finely worked target arm is a pleasure. But is the shooter capable of such shooting that the expensive reworked pistol is worth the money?

Just MO, most shooters are not good enough that a fancy reworked pistol would make a different. It is more a matter of calculating the "points off" A lousey shooter that consistently shoots a 10 inch group at 25 yds, will not be improved. A good shooter who can consistently hit a 2 inch group at 25 yds, may be saved a point or two with such a gun.

I am immediately suspicious of whether the rest of Hege's quality is being sold down the river for sales. .

Last edited by zimmerstutzen; June 11, 2014 at 06:10 PM.
zimmerstutzen is offline  
Old June 11, 2014, 04:36 PM   #6
Old Fuff
Member
 
 
Join Date: December 24, 2002
Location: Arizona
Posts: 21,912
I have seen groups that have all 5-shot bullet holes touching the main group that were fired at 100 yards. It isn't that we can't make revolvers that can do this, but rather that it costs substantial bucks to do it.
Old Fuff is offline  
Old June 11, 2014, 04:53 PM   #7
Mike OTDP
Member
 
 
Join Date: October 31, 2007
Location: Somewhere in Maryland
Posts: 1,397
Back to the OP...

Hege can be thought of as the German equivalent of Dixie Gun Works. They sell a lot of stuff, of different quality levels.

They used to sell a Remington repro, the Army Match Maximum, that was built by Feinwerkbau. Some sort of exclusive deal, the guns carried only Hege markings. But FWB is the source for spare parts.

At present, Hege is selling a heavily reworked Uberti gun under that name. Not the same gun. I haven't handled one, but the German gunsmiths are very, very good. It would not surprise me if the gun shot quite well.

I've shot the Pedersoli Remington, and found it quite impressive. I thought the one I shot needed trigger work to make it crisper, but the basic gun was OK. They should become more available in the next year.

Pietta sells what they call the "Shooter's Model". This has fixed sights (required under MLAIC rules), and is their top-of-the-line gun.

I spent a day doing arms inspection at the 2012 World Muzzle-Loading Championships, and the FWB-made Remingtons were by far the most popular guns - as in 80% or more of the entries. There were a handful of FWB Rogers & Spencer repros, and a smattering of everything else.
__________________
Support the U.S. International Muzzle-Loading Team! www.usimlt.com
Mike OTDP is offline  
Old June 11, 2014, 05:04 PM   #8
ZVP
Member
 
 
Join Date: May 20, 2010
Posts: 621
No doubt Remingtons can be accurate
1 The Imports can sometimes turn in some good groups, most are good but some can be phenominal!
My 5 1/2" shoots a consistant 3 1/2 @ 21 ft offhand. A lot of it is me, I like to shoot pistols but am only an average shot. Migh even say less than average. My 8" model shoots tighter but I lie the size of the short barrel. It just balances the revolver like a peacemaker or a Vaquero.
I load 35 gr of Pyrodex and lead balls. in both remmies. Seems to be the best all around load.
I prefer the solid frame to the Colt's open frame but I like the way the Colt sits low in the hand though.
If I was back in the Old Days, I'd probablly carry a remington.
ZVP
ZVP is offline  
Old June 11, 2014, 06:22 PM   #9
Crawdad1
Member
 
 
Join Date: September 13, 2012
Location: Pennsylvania
Posts: 1,076
Great info guys!!!
So we have the FWB built Hege Remington and the Uberti built Hege Remington?

But 80% FWB Hege, at the world Championships, that says a lot!!!!
Crawdad1 is offline  
Old June 12, 2014, 06:40 PM   #10
mec
Member
 
 
Join Date: December 27, 2002
Posts: 4,396
Ive seen the mischief that undersized chambers do with ASM revolvers, Webleys and other more or less modern revolvers. Ive seen cylinder/bbl misalignment with Smith and Wesson revolvers from the 80s (but not afterward) and a few ASMs but have had perfect luck with both with Uberti replicas -both percussion in ctg since 2005 or earlier. The chamber/bore dimensions in the Cimarron Model P WCF revolvers is much better than gen 1 colts and they are predictable more accurate: http://americanhandgunner.com/the-cimarron-model-p/
By the way, Old Fuff is the genuine article. He was probably the genuine article even when he was Young Fuff.



he Cimarron .32-20 produced “duelist” groups ranging from 2.7″ to 4″
and a best 25 yard bench group of 1.4″. The load is 4.3 Unique with
a 115 gr. Oregon Trail flat point.”
mec is offline  
Old June 12, 2014, 09:19 PM   #11
Crawdad1
Member
 
 
Join Date: September 13, 2012
Location: Pennsylvania
Posts: 1,076
I have a Uberti '58 Remington from Taylor's & Company, a class act for sure, that has a dovedtailed front blade. Once again, my 5th revolver I have bought from these people and once again without fail, the revolver's action is smooth as silk with the sweetest trigger pull anyone could ask for.

here:

http://www.taylorsfirearms.com/black...odel-107a.html

Look under 'specs' tab

or here;

http://www.taylorsfirearms.com/parts...ved-parts.html

Part #15



Meaning this cannot be used in competitions???

Last edited by Crawdad1; June 12, 2014 at 10:03 PM.
Crawdad1 is offline  
Old June 13, 2014, 01:51 AM   #12
Old Fuff
Member
 
 
Join Date: December 24, 2002
Location: Arizona
Posts: 21,912
I think a dovetailed front sight combined with a groove-in-the-topstrap rear one is considered to be "fixed sights." On the other hand some New Model Remington replicas have been made with an adjustable rear sight and matching front. They, and Ruger's Old Army (fixed or adjustable sights) are not allowed in International Competition.
Old Fuff is offline  
Old June 13, 2014, 06:37 AM   #13
BowerR64
Member
 
 
Join Date: August 1, 2013
Posts: 1,244
There are good and bad of both the colt and the remington.

I'd say the remington is the consistantly the most accurate but it has its flaws.

I didnt think the colt could ever be as accurate as a remington but it actually can. Not sure how consistantly accurate
BowerR64 is offline  
Old June 13, 2014, 07:33 AM   #14
4v50 Gary
Moderator
  
 
Join Date: December 19, 2002
Posts: 16,441
Accuracy begins with the barrel. Lockup, alignment of the cylinders are the other mechanical aspect that play a role. Finally there is the ball and powder combination (and sights and grips) which are entirely under the control of the shooter.
__________________
TFL Aluminium. Molon Labe!
4v50 Gary is offline  
Old June 13, 2014, 10:24 AM   #15
Crawdad1
Member
 
 
Join Date: September 13, 2012
Location: Pennsylvania
Posts: 1,076
As they say guys, “The proof is in the puddin” I love Colts, but in the World competition as Mike has stated most are shooting the Remington.
I don’t think I have the “eyes’ anymore to keep up with those world class shooters, years of smoking cigarettes combined with my age and who knows what has taken its toll. But I want to be there with something I use frequently, that I hunt with, target shoot with, and blast beer cans with. That said, I guess it has to be the '58 Remington.

I guess my 1860 Army is relegated to the display case.

Last edited by Crawdad1; June 13, 2014 at 10:31 AM.
Crawdad1 is offline  
Old June 13, 2014, 10:29 AM   #16
Crawdad1
Member
 
 
Join Date: September 13, 2012
Location: Pennsylvania
Posts: 1,076
Old Fuff, I had one of those way back I think it was the Pietta 'Target Model' and it had an adjustable rear sight mounted on the back of the top strap of the Remington.

My Second Generation 'C' Series 51' Colt in Navy caliber, the most beautiful firearm I have ever owned, consistantly beat the daylights out of it at the range.
Crawdad1 is offline  
Old June 13, 2014, 10:34 AM   #17
Crawdad1
Member
 
 
Join Date: September 13, 2012
Location: Pennsylvania
Posts: 1,076
I'll post pics of my Remington as soon as I can remember where I put my camera.
Crawdad1 is offline  
Old June 13, 2014, 12:39 PM   #18
Old Fuff
Member
 
 
Join Date: December 24, 2002
Location: Arizona
Posts: 21,912
Quote:
I had one of those way back I think it was the Pietta 'Target Model' and it had an adjustable rear sight mounted on the back of the top strap of the Remington.
Yup, but it was a bit misrepresented. While an adjustable rear sight was added no special effort was made to make the revolver more accurate. It does not surprise me that your higher quality Colt outshot it.

By the way, many years ago when I was having a good day I shot a 4 shot group with the holes interlocked in one hole about the size of a quarter coin, and a 5th one about 1" outside the group. This was done with an original Colt 1851 Navy made in 1863, held in one hand, at 25 yards. Tried hard but never duplicated it.

While I will concede that an accurized Remington (or similar) may be required to be competitive in some upper-level competitions; I see no reason to think this is the case when it comes to informal daily shooting.

When it comes to some (and only some) ordinary revolvers (regardless of make or style) accuracy issues can usually be resolved by reaming the front part of the chambers so they match the groove diameter in the barrel. Of course then you need to go to a larger ball/bullet to match the new chamber diameter. Doing this (or having it done) is neither difficult nor expensive.

It will be a cold day in a well known warm place before I give up on Colt style revolvers.
Old Fuff is offline  
Old June 13, 2014, 01:08 PM   #19
RPRNY
Member
 
 
Join Date: March 8, 2012
Location: Westchester Co NY
Posts: 1,148
My opinion, for what that is worth. I have shot just about all the Remington and Colts by the various makers in 36 and 44 cal. I am not proficient enough to be competitive at the upper end of BP pistol shooting, so the very best might be wasted on me.

But if I wanted the very best, there are three guns I would choose from:

1) the Feinwerkbau 1858 Remington target. It is markedly more finely made than anything Italian and has excellent sights
2) the Feinwerbau Rogers & Spencer target. The nicest most well made replica revolver I have ever held. Not quite as elegant as the 1858 for target use
3) the Euroarms Rogers & Spencer target with Lothar-Walther barrel. Excellent sights that need a good deal of adjusting for elevation but just not as well made as the FWB.

Again, an opinion from someone who is not a world class shot.
RPRNY is online now  
Old June 13, 2014, 01:50 PM   #20
mec
Member
 
 
Join Date: December 27, 2002
Posts: 4,396
Wonderful as equipment racing to win matches certainly is, approximating what might be expected from original period pieces is satisfying too. They are not the same. This is from an original remington in decent condition. I'm not sure what shooting position the owner was using but his results seem in line with the use most shooters of the era expected from their handguns. They resemble the results many modern Operators! get with their weapons at the same distance when they are trying hard.
This owner ( as well as Jim Taylor who has used a LOT of original remingtons) found that .457 balls worked best. He was getting chain fires with 454s and put it aside until he decided maybe the larger balls would seal up better. ..They did.



mec is offline  
Old June 13, 2014, 02:03 PM   #21
Crawdad1
Member
 
 
Join Date: September 13, 2012
Location: Pennsylvania
Posts: 1,076
Quote:
the Euroarms Rogers & Spencer target with Lothar-Walther barrel. Excellent sights that need a good deal of adjusting for elevation but just not as well made as the FWB.
Didn't they put that type of barrel on their Remington also? I know a few fellas who had the Euroarms Remington but they referred to them only as 'Match grade barrels"

I'll have plenty of time on my hands so I'm thinking about entering into some competitions with a revolver. I've competed with my flintlock longrifle at local matches and while that was fun my first love and my first firearm of any kind was a c&b revolver.

Last edited by Crawdad1; June 13, 2014 at 02:10 PM.
Crawdad1 is offline  
Old June 13, 2014, 02:09 PM   #22
Crawdad1
Member
 
 
Join Date: September 13, 2012
Location: Pennsylvania
Posts: 1,076
Quote:
It will be a cold day in a well known warm place before I give up on Colt style revolvers.
I know exactly what you mean, but I just can't get the confidence in my 1860 Colt that I need to compete with it. But we'll see.
Crawdad1 is offline  
Old June 13, 2014, 04:17 PM   #23
Old Fuff
Member
 
 
Join Date: December 24, 2002
Location: Arizona
Posts: 21,912
Quote:
Wonderful as equipment racing to win matches certainly is, approximating what might be expected from original period pieces is satisfying too. They are not the same. This is from an original remington in decent condition. I'm not sure what shooting position the owner was using but his results seem in line with the use most shooters of the era expected from their handguns. They resemble the results many modern Operators! get with their weapons at the same distance when they are trying hard.

This owner ( as well as Jim Taylor who has used a LOT of original remingtons) found that .457 balls worked best. He was getting chain fires with 454s and put it aside until he decided maybe the larger balls would seal up better. ..They did.
If we presume that the other chambers are the same a .457" Dia. ball would be swaged to .454" in the chambers. Now the question is (which I can't answer) is, "What is the barrel's groove diameter?".

However...

Dixie/Uberti Remington New Model Army (reproduction)
Chambers: .450" Diameter: Barrel Grooves: .460" Diameter (.010" over chamber diameter.)

Notice these numbers concerning Ruger's Old Army - that has a wide reputation for outstanding accuracy, modern design not withstanding.

Chamber Diameter: .453" Recommended Ball Diameter: .457"

Barrel Specifications: .004 Deep, Cut rifling: 6 Grooves, 1 to 16" Twist. .451" Groove Diameter. (Groove Diameter is .002 under chamber diameter.)

Are any light bulbs going on?
Old Fuff is offline  
Old June 13, 2014, 04:31 PM   #24
Old Fuff
Member
 
 
Join Date: December 24, 2002
Location: Arizona
Posts: 21,912
Quote:
I know exactly what you mean, but I just can't get the confidence in my 1860 Colt that I need to compete with it. But we'll see.
We both fit the saying, "Growing old is hell, but the alternative is much more so."

Unless it's "Newby Dub-Day" at any tournament I might go to, it's highly likely I'd come in 49th in a total field of 48.

But I can have fun, shoot the best I can, and BS with the new shooters coming up.

Your Colt 1860 replica may need a chamber reaming job and a little work on the action/trigger pull, but I can assure you that any big groups are not the revolver's fault. Been there/done that.
Old Fuff is offline  
Old June 13, 2014, 04:46 PM   #25
mec
Member
 
 
Join Date: December 27, 2002
Posts: 4,396
the guy was just looking for a ball that would fit and discourage chain fires. I don't know if he measured the bore or not. Taylor said the chamber openings on the originals were .452 and he found an early Hawes to have .445 chambers- so much under bore size that he reamed them to accept .457 balla.
mec is offline  
Reply


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:30 AM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
vBulletin Optimisation by vB Optimise.
This site, its contents, Shooting Reviews, and its contents are Copyright (c) 2010-2013 Firearms Forum, Inc.
IMPORTANT DISCLAIMER
Although The High Road has attempted to provide accurate information on the forum, The High Road assumes no responsibility for the accuracy of the information. All information is provided "as is" with all faults without warranty of any kind, either express or implied. Neither The High Road nor any of its directors, members, managers, employees, agents, vendors, or suppliers will be liable for any direct, indirect, general, bodily injury, compensatory, special, punitive, consequential, or incidental damages including, without limitation, lost profits or revenues, costs of replacement goods, loss or damage to data arising out of the use or inability to use this forum or any services associated with this forum, or damages from the use of or reliance on the information present on this forum, even if you have been advised of the possibility of such damages.