|Welcome to THR|
|You are currently viewing our site as a guest which gives you limited access to view most discussions, articles and access our other FREE features. By joining our free community you will have, access to post topics, communicate privately with other members (PM), respond to polls, and access many other special features. Registration is fast, simple and absolutely free so please, join our community today! |
If you have any problems with the registration process or your account login, please visit the help section.
|August 8, 2014, 03:40 PM||#1|
Join Date: June 5, 2006
Location: In a part of Utah that resembles Tattooine.
SKS bolt trauma
I started having problems with it, I had a lot of failures to fire and one slam fire. That's when I decided to stop messing around, I called a smith, and he told me I likely had some cosmoline in the firing pin channel. I was skeptical, because I had cleaned the hell out of it and I thought that if that was the problem, it would have shown up a lot sooner. But I boiled it and soaked it in mineral spirits for a few days, and sure enough, some more cosmo oozed out. I scrubbed, blew, and rinsed it out and now I can't get any trace of anything.
Here's the problem now. The firing pin still won't exactly 'move freely'. The get it to move fully forward, I have to push it hard with my thumb, or give it a knock on a hard surface. I think there's still some kind of obstruction or damage in the channel or on the pin.
So I try to take it apart, and maybe I'm a wuss, but using punch and a BFH, I can't get the takedown pin to budge. I did some googling, and apparently the Yugos have that pin very tight to prevent halfwits like me from meddling with the bolt, where other SKSs are made so it comes out very easily. I laid it over a crack in my driveway and pounded it, I can't make it budge. I have a small vise, I put it in it, and when I whack it it falls right out. (The whole bolt assembly, not the pin.)
I also noticed that the tip of the firing pin appears to be mis-shapen, a little bit peened over. If I did this, I have no idea how.
So, I want to take the bolt apart, but I am afraid I will damage it. I'm not too worried about the shape of the pin as long as it works, but I wonder if some metal shaved off of somewhere, and it's still in the channel blocking motion.
I have the Tapco bolt they made for a while, with the trimmed rails to allow magazine removal and the sprung firing pin, but then I found out it needs to be head-spaced, it isn't drip-in. When I called Tapco about something else, they said they discontinued it because they were unable to work the bugs out of it. So I threw it in a drawer somewhere.
So I guess I'm wondering,
Do I need a new firing pin?
Do I have to take the bolt apart to figure out what's wrong?
Should I just find someone to headspace the Tapco bolt and forget about it?
"I'm not saying we should kill all the stupid people. I'm just saying that we should remove all the warning labels and let the problem work itself out."
Last edited by mljdeckard; August 8, 2014 at 04:10 PM.
|August 9, 2014, 01:40 AM||#2|
Join Date: June 7, 2006
Location: Texan by birth, in Colorado cause I hate humidity
I step out of the shower wearing nothing but an AR-15 and a frown.
Superior gear will never make up for a lack of training or attitude.
When your time comes to die, be not like those whose hearts are filled with fear of death, so that when their time comes they weep and pray for a little more time to live their lives over again in a different way. Sing your death song, and die like a hero going home.- Chief Tecumseh
|Although The High Road has attempted to provide accurate information on the forum, The High Road assumes no responsibility for the accuracy of the information. All information is provided "as is" with all faults without warranty of any kind, either express or implied. Neither The High Road nor any of its directors, members, managers, employees, agents, vendors, or suppliers will be liable for any direct, indirect, general, bodily injury, compensatory, special, punitive, consequential, or incidental damages including, without limitation, lost profits or revenues, costs of replacement goods, loss or damage to data arising out of the use or inability to use this forum or any services associated with this forum, or damages from the use of or reliance on the information present on this forum, even if you have been advised of the possibility of such damages.|