Custom case on a budget.

I figured I'd share my experience and products I've found for those who are like me and want a nicer case for their firearms but don't want to or can't spend the money to get something professionally done. I am not really handy at all, and with the ability many have on here I'm sure yours could look alot better!

Awhile back, I was oogling Case Club cases and decided to try my hand at making my own. Ended up a little rough around the edges but functional. I used a Plano All Weather XL Pistol case and 2 layers of 57mm Kaizen foam. For those not familiar, Kaizen foam is made of thin layers of closed cell polyethylene foam glued together. This is the cheapest place I've found it:

https://www.newegg.com/p/2YG-007B-00003?&quicklink=true



So, time went by and I ended up upgrading several of my rifle cases from the cheap Plano cases. I recently bought one of their 52" All Weather Rifle Cases at their outlet store for $49 (killer deal!) and ordered this foam from Case Club via Amazon:

https://www.amazon.com/Case-Club-Closed-Military-Grade/dp/B07Z17LQW4?th=1&psc=1

It's similar to the Kaizen foam but the layers don't seperate so you have to cut all the way through. This is what I ended up with for my Savage 10. For a total investment of $100 between the case and foam, it's hard to beat. Looks nicer and will last alot longer than the pick and pluck.




Pretty soon, I'm going to order 2 more sheets of Kaizen to do cases for my AR and Weatherby Vanguard.

Snap off utility knives. Larger one for the long stretches, smaller one for the more detailed bits. Some people use an electric carving knife, I also used a hot knife in the past, works really well but the fumes aren't great for you so I use it sparingly and to smooth edges.

Stew0576 said:

How much for you to make me a pistol case lol

Click to expand...

Before I get into that business, I'd need some better tools! The one I made is really rough, honestly the pictures make it look better than it is up close, but its functional which is what matters to me. I have actually since cut slots on the top left and right for my LCP 2 and Shield as well, making it a 7 pistol case all said and done.

Anyway, the design looks complicated but it's not that difficult to do. If you are interested in a more detailed process of how I made the pistol case, I started by using Case Club's custom design tool here:

https://www.caseclub.com/custom-foam-designer/

I put in the dimensions of the case and messed with different arrangements and measurements until I settled on what I have, which looks like this in the tool.



Splitting that between two layers, it looked like this. Top one has the blue cut all the way through, bottom has the black sections cut 1 inch deep. After that it was just measure and cut. I did have to relieve a little extra for the revolver cylinder after the initial cuts. Each layer is 2 inches thickness and I used foam glue to glue them together afterwards.

With the slots cut for the LCP 2 and Shield, this is what it looks like now. Kinda gives a better view of the roughness, haha. I may redo it with the left over foam from my rifle cases.



Oh, and as a budget option, if you have a Harbor Freight near you they have some decent weatherproof pistol cases (Apache is the brand) at a good price. No Pelican but good enough for most situations.

ApacheCoTodd said:

Imperfections are smoothed with scotch-brute pads and then those are rinsed of residue with hot water and returned to circulation.

Click to expand...

I'll have to give that a shot.

I've toyed with the hot wire idea, if I were handier I've seen some inexpensive homemade setups that are very nice I'd like to try. If I could even get a thinner bladed hot knife I think it would make a big difference.

Call me crazy, but I'm really considering buying this case and working out a whole new layout so I can fit all 8 handguns in one case. The other way I've been thinking of going is getting one of the smaller Apache cases and cutting that one for revolvers and redoing my Plano for my semi autos.

https://www.amazon.com/DURATOOL-22-24160-Equipment-Weatherproof-Polypropylene/dp/B079BMBQKH

Option number two is probably smarter, I don't shoot my revolvers that often so it would make sense too.

ApacheCoTodd said:

Looks like it would certainly work but appears to maybe be a bit awkward to carry once filled with shootin' irons.

Todd.

Click to expand...

Ya, that was one of my issues. Much deeper than it needs to be.

Looks really nice! I'm thinking about picking up one of these rotary saws from Harbor Freight and trying it out. Designed for drywall but I imagine it would work. Depth isn't quite as deep as I want but I'm thinking I might be able to use a regular drill bit that's a bit longer since foam won't be as hard on it as drywall maybe?

https://www.harborfreight.com/electric-cutout-tool-42831.html

Oh, and one thing I forgot to toss in earlier, I use this for tracing. Makes life alot easier.

https://www.amazon.com/FastCap-Long-Nosed-Pattern-Marker/dp/B002NQPEE6

Rembrandt said:

Nicely done Nature Boy, looks great.

Did a case for an over/under four barrel set, used the open cell foam at the time, wish I'd used closed cell instead.


View attachment 893954

View attachment 893955

View attachment 893956

Click to expand...

I like how it looks! If you ever get bored, doing it in closed cell wouldn't be that much effort, honestly I find it to be a nice relaxing afternoon project (which I'm guessing you know based on previous posts). With the kaizen foam coming in 2'x4' sheets, depending on the size of the case you can often get multiple cases out of it.

For me, the biggest benefit of the closed cell is the peace of mind that it won't a absorb moisture. Not that my firearms stay in the cases long enough for it to really be a major worry, but I'm just a worry wart when it comes to moisture and rust.

Zombie thread time.

I bought that electric cutout tool and will be ordering the Kaizen foam this week, so I'll update on how it works. Excited to see if I can get a better looking cut.

So, here's my last 2 cases. The electric cut out tool, with the provided bit, cuts just about 3/4 of the way through the kaizen sheet when fully extended, if you wanted to you could adjust the depth shallower to fit your needs. I should have worn a mask (lots of foam dust, still coughing that crap out) but it definitely gave me a straighter, neater cut than the snap off blades, which work fine in their own right.