full or parts for LNL Case P/M

I got this kit when I did this last year.

https://www.midsouthshooterssupply....ooters-ultimate-hornady-ap-powder-measure-kit

.40

Midway has the case activated powder drop die.

https://www.midwayusa.com/product/1012747927?pid=591344

Powder measure is purchased separately.

That’s a pretty good deal. I had to buy a powder measure with a rifle rotor then buy a pistol rotor and then the linkage. Was a lot more than what they want.

Here is a list of common spares that LNL AP owners should have on hand. If one these breaks sure Hornady will replace it, but if you have a spare you can get back to work.

Hornady LNL

Common Spare Parts



Qty 3 - 392336 SPRING PRIMER SLIDE LNL AP QTY 1 $1.88 EA

392363 SPRING CASE RETAINER LNL AP QTY 2 $2.00 EA

392344A PAWL-NEW STYLE LNL AP QTY 4 $5.21 EA

392423 SPRING PAWL QTY 1 $1.88 EA

398738 SPRING EXT. 1.59 (NEW) QTY 1 $2.73 EA

392202 BRACKET LNL AP QTY 1 $2.57 EA

.40

Why are you switching the rotor? You can easily remove the insert.

bbqreloader said:

Because I have it primarily set up for pistol, i.e. pistol rotor. The two inserts have different sized stems, therefore require different rotors.

Click to expand...

Ok, that makes sense. It's also a pain.

That is a good deal. I have one set up for pistol and one for rifle.

forty_caliber said:

Here is a list of common spares that LNL AP owners should have on hand. If one these breaks sure Hornady will replace it, but if you have a spare you can get back to work.

Hornady LNL

Click to expand...

I solved that issue by buying a 2nd LNL when Midsouth had them on sale around New Years.
Also, I've had the spring anchor on the primer slide come loose and throw the machine off. I took the slide out and used a center punch to stake the anchor in place. So far, so good.