GeoDudeFlorida
Member
- Joined
- Dec 1, 2020
- Messages
- 11,000
I won't use WD40 on my guns because of the paraffin content. As a machinist I used it as the final step of prepping a machine for a new job after it was stripped and cleaned. Water displacers are good at displacing water.After we bought our retirement properties at the coast in 2014/2015 where 60%-100% humidity is the norm, I found everything rusted - Chrome Vanadium and stainless steel tools in the pole barn and even stainless steel gun parts stored inside the house.
21 day outdoor rust test - https://dayattherange.com/?page_id=3667
I had been using BreakFree CLP and motor oil for gun parts but after reading this extensive comparison of lubricants and other comparison tests where WD-40 Specialist kept coming out on top, I bought a can to try and now use it on all my tools and guns.
There are several different versions of "WD-40 Specialist" including the one made with silicone. You want the "Long-Term Corrosion Inhibitor" version with manufacturer's product number 300035 - https://www.homedepot.com/p/WD-40-S...-Rust-Spray-300035/300719560#product-overview
"A long-lasting rust preventative that protects metal parts, blocking rust and corrosion for up to 1 year outdoors or 2 years indoors. WD-40 Specialist® Corrosion Inhibitor is an anti-rust spray ideal for preventative maintenance and uses in extreme environments such as high humidity. It provides non-drying protection that stays where you spray it. A must have for corrosion protection.
- Protects against rust and corrosion 40x longer than competition*
- Blocks rust and corrosion for up to 2-years when used indoors and for up to 1-year when used outdoors, the formula clings to metal and protects it from air and moisture
- Recommended for preventative maintenance or for protection in corrosive environments, such as hot and highly humid or cold, and wintery atmospheres
- Included straw creates a precision stream of lubricant for controlled application and fastens to the notched cap for secure storage
- Non-drying lubricant does not run and says where you spray it, 50-state VOC compliant and NSF category A7
- *Test Lab: Petro-Lubricant Laboratories Inc. (Lafayette, NJ); ASTM B117; Test date: 05/2020"
My guns get a combination of stuff depending on what it is and what kind of action but it's generally some light machine oil on the interior and some light mineral oil with an alkyl rust inhibitor on the exterior. Grease in the places that need grease ,of course.
Not that I object to WD40 as a lubricant and protective. I don't. It does work and I do use it, just not on my guns because I don't like the feel of paraffin.
Did you know: WD40 was never patented and the exact formulations are kept as industrial secrets?