Glock suggestions

I have a G35 I put better sights (LPAs) and a G26 I put Tru-Glos on + a Glock extended slide release on (G35 already has this). Other than that, I'm really happy with their performance.

Replace the magazine when empty.

If yours doesn't already have glow-in-the-dark sights, or the factory sights have gone dim, and you think such things are useful, you might get a set.
That's about it when it comes to Glocks.

I don't think the Glock is perfect by any means.
But, I haven't found anything to hang on it, or to replace, which would make it any more useful to me.

When you buy a good quality hand drill at the hardware store, do you modify it, or "upgrade" it?
No. You don't.
You just use it.

If it ain't broken, don't fix it. That's the idea. I agree about the sights though. May be they're worth replacing.

Guns are tools but certain upgrades can make them more effective. They have a market for accessories, whereas drills don't.

Im looking for any suggestions from those that own older glocks if there is anything else I should replace as its an early gen 3 made in 1999.

Click to expand...

If it has the plastic factory sights I would replace those. I would have spares for things like the recoil spring on hand and replace as needed.

Anytime I buy a used semi-auto, especially if I don't know its history, I'll replace the recoil spring. Did this when I got my used Gen3 19. Usually inexpensive and good insurance to keep your "new" firearm running well.

Where did you find the G19 mags?

I would do a complete spring change, cheap insurance. I recommend Wolff Gun springs. Also get a Ghost 3.5 connector.

I run stainless steel guide rods on all my glocks as well as glockworx race connectors and adjustable fulcrum triggers. What works for me might not work for you but my Glock 17 is on par with my 1911's at 25-50 yards.

If it's your EDC, then do as suggested, get night sights and a new recoil spring.

If it's just a range toy, then shoot it until it breaks, which, being a Glock, may take a while!

It may have not seen many rounds, and even if it has, no worries! Have fun!

I just check the springs,add 3.5 connectors with over travel stops,polish the innerds,and change out the sights on all glocks and shoot the heck out of them.I do not lighten any of the springs.

miles1 said:

I have No idea how to do that.I guess I could ask a glock armorer but not sure if its worth the cost.

Click to expand...

There are plenty of online resources that can assist you. If you plan on having a long , fruitful life with your Glock, you will need to learn anyway. This is one of the positives of the Glock, ease of maintenance.

I agree on the spring change. Whenever I buy I used autoloader with unknown history it gets this as preventative maintenance. I would go a step further than recoil spring though and say also coiled trigger return spring, firing pin (striker) spring, and extractor spring. Give it a good detail cleaning while you're in there especially in the striker and extractor channel. You want it clean, but DRY. Don't get a bunch of oil or solvent in there, and if you do while cleaning, dry thoroughly. Who knows what the guy before you did, it may be full of crud.

Other things I would take into consideration would be a new slide lock spring and slide stop spring. Check your mags too, give them a cleaning and possibly a spring swap. I'm sure some would find all this excessive, but the parts are so cheap and easy to change it's hard to think of a reason not to do it for a firearm that may be used to defend your life or the life of your family. If I pick up a newer Glock that still has anti-seize compound in it and looks like it's barely been shot I'm a bit more lenient, but they still get the basic spring change. Keep in mind also, some of this is not just to replace worn parts, but to fix any "upgrades" Bubba may have added to the gun. I've seen some interesting modifications in used guns.

Hold off on the aftermarket parts, reduced weight connectors, etc, until you've left a pile of brass at your feet through the gun. Gain some experience with the weapon until you don't need to ask others what to change. You may find that you like it just the way it is. Glocks are great platforms, very durable, and very low-maintenance, but not maintenance free.

Buy some night sights or fiber optic sights and magazines and you're good to go

Extended mag release and extended slide release. Cheap to do and very functional.

miles1 said:

Funny, after your first post I ended up looking on you tube and found multiple posts on exchanging springs that didnt look too bad.I think Ill give it a try.

Click to expand...

Glocks are awesome for detail stripping. Very easy. I was terrified the first time. And it was so easy - when done, I knew all about my firearm and that it was good to go. I used YouTube videos as a guide, as well as some online step by step guides with good pictures.

I would keep some spares handy of the following:

Take down lever spring
Slide stop spring
trigger spring

Shoot it until it seems to have an issue though

I've done as much puttering around with Glocks as anybody.

I can tell you this. On Gen 4 Glocks, CHANGE NOTHING... But the stock sights. Go with some Meprolights. They are as good as they come for the money. Maybe go to a 3.5 connector, but that's about it.

Your Gen 3... Do the following.

Sights - Meprolights.
Extended mag release button.
Maybe an extended slide lock - Makes takedown easier.
Maybe an extended slide stop lever - Allows your thumb to let the slide move forward after a mag change.
Maybe a 3.5 connector.

http://m.youtube.com/watch?v=DZf4mUM10Vc

Here you go... Basics on cleaning. and... I dig Ballistol. Great product and works on wood, plastic and coats metals like Hickok says...