-
-
vaalpens replied to the thread Powder for Multiple Cartridges.For 10mm it is probably better to go with jacketed bullets. This is the recommendation from Xtreme: "Any velocities over 1200 FPS we... -
vaalpens replied to the thread Powder for Multiple Cartridges.Let us know how the 10mm testing goes with BE86. I am in the same boat, not loading 10mm, but trying to help out a neighbor with 10mm...
-
vaalpens replied to the thread New .40 S&W loader. (I think I'm prepared).I hardly see any cracks in my .40 cases, so I will throw out any case with a crack in the neck. Safety comes first.
-
vaalpens replied to the thread New .40 S&W loader. (I think I'm prepared).Thanks for the better explanation. My method is not perfect, but it helps when things are very close to the limits. I actually use...
-
vaalpens replied to the thread New .40 S&W loader. (I think I'm prepared).I am not a perfectionist, but those loads do not looks good. Coating is missing and it looks like the bullet ogive is inside the case...
-
-
vaalpens replied to the thread New .40 S&W loader. (I think I'm prepared).With that velocity and an 180gr bullet, there shouldn't be any problems cycling. Make sure you don't limp wrist, and do the plunk and...
-
vaalpens replied to the thread Anyone used the RMR 135gr 9mm Matchwinners?.I don't know if this is the match winner bullet, but probably close. Hodgdon load data: 9mm: 9mm +P:
-
-
vaalpens replied to the thread Advice from a professional. -Lube your pistol cases..I have been in the camp of not using lube for resizing of pistol cases, but I have made one exception. When resizing 9mm with a Lee APP...
-
vaalpens replied to the thread WTK: Lee 10mm Bulge buster Die.The .40s&w Lee FCD is used as bulge buster for .40s&w, 357sig and 10mm.
-
vaalpens replied to the thread Titegroup and 115 gr fmj.I don't have a lot of test data with 115gr fmjrn and Titegroup, but following is a load I have tested: 9mm, P365X, 3.1" Case: FC...
-
vaalpens replied to the thread The pitfalls of relying on reloaded ammo..I'm not sure this is correct based on your measurements. Your measurements shows a diameter at the top to the rim of .361", I assume...
-
vaalpens replied to the thread Confusing results with 9mm and CFE Pistol.I'm not saying you are wrong, but it takes some experimenting to find what will work. For me in 357sig, CFE Pistol and the 147gr RMR...
-
-
vaalpens replied to the thread 9mm target load.Understood. So the key is to make PF and accuracy is secondary. Just a correction on my previous post. I indicated "I have done a lot...
-
vaalpens replied to the thread 9mm target load.Looks like you are trying to find an accurate AA#5 load. I have not done a lot with AA#5, but the most accurate for me so far in 9mm is...
-
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
-
Loading…
