Recent content by ar-newbie

wow, totally expected responses. Look at the gas tube photo above, it shows the armalite tube, and the PA10 (AR15) tube one above the other. you can clearly see the difference. Enough about regurgitating. You guys are like a third grade debate session. You can pull up old quotes and spin a tale...

the gas tube they are using is for an ar15, it is NOT made for a large AR rifle, therefor it sits lower to the bore, and has to be bent in order to MAKE it fit. The armalite tube is the proper tube to be used for the barrel and upper receiver. The hole the tube goes through into the receiver is...

There are several threads with a lot of test results and measurements. seriously, I sent you the link and you haven't even taken the time to look at it. it's all wrong, solely because you said so. And apparently I am an idiot because I came right and asked PSA what parts to order to build a PA10...

Perhaps you should come over to the 308 forum and tell us all how stupid we are and that the rifles are fine as is?

Have fun arguing with yourself. I laid out the facts, and you completely ignored them.

I guess I look at FUDDs as something separate from the guns they clutch onto. There are lots of nice classic guns both old, and new ones coming out that cater to that side of the market place.

sometimes a person just wants a particular gun, and it's not really up to anyone else. That's the point of a free market and choice. It's when they start passing laws restricting your choice where it becomes a problem.

Your implied lack of knowledge, along with the superior attitude you have is truly staggering and pathetic. I am done arguing the point. I have laid out what is wrong, and specifically why. Yet you continue to turn it around and imply it was all my own fault. Fact 1, my upper was a complete...

Here is what will happen on most of them if you don't either address the bad recoil system, OR stick quarters in the buffer tube.

As for short gas tubes, here are 5 different examples of the tube being too short The last image is what it should look like,

Also, for those who don't want to take the time to follow the link, and look at some others on the 308ar forum specifically for the PA10 rifle, and see that there are NUMEROUS specific demonstrations of short gas tubes on the PA10.

no comment from the peanut gallery on why if the PA10 is so well sorted, there are no less than 17 different Skus and 3 gas system lengths, and over 100 different youtube videos of people demonstrating the problems they are having with the PA10? Also, I have at least 5 different email...

Since you never took the time to read the thread referred, but instead preferred to dig up posts here before I was aware of the issues, here are the correct functional parts for the recoil system to work without beating itself to pieces along with your shoulder...... correct length Buffer tube -...

apparently you never read the linked thread detailing everything wrong with the recoil system, or you would know it's not over gassed, it's an improper recoil system.

well, to start off, the buffer tube and buffer and spring were all wrong from my initial order, and I ordered from their website the proprietary parts specific to their PA10, but individually, since they had no bundles. After reading the threads on 308ar forum, BEFORE ever firing the rifle I...