Dillon Casefeed
All of the Dillon products I have are built of high quality parts, no worry there.
I also turn the feeder off when loading and turn it on when the tube is almost empty.
Gary
I have used the RCBS tool to decap several hundred berdan brass cases, both 7.62x51 and 7.62x39. It works good but does require some patience. I have reloaded these cases with no problem.
Gary
Gloves
I have a pair of these, I have used them in the snow and they work well. If it was crazy cold you would need something heaver.
http://www.outdoorresearch.com/en/mens/gloves/ironsight-gloves-old-498.html
Gary
Brass
I have brass that was cleaned using wet process, at least 3 years ago and it is still bright and shiny.
You don't need brass preservative unless you live next to the ocean.
Gary
800X
I use my RCBC chargemaster combo to throw 800X for shotshell, the powder bar on the MEC does not work well with the cornflakes. I only load Buckshot and Slugs for shotgun so it work good for me.
The 800X works great in the RCBS.
Good Luck
Gary
Trigger
I put a Timney on my 700 and really like it, about 3.5 lbs pull and no issues after about 5 years.
I would not want any less pull for tactical uses (non benchrest)
Gary
RL-15
The M118LR round uses Lake City brass, RL-15 powder, and a Sierra 175gr bullet (not sure about the primer) designed to be shot in a bolt action rifle.
Gary
Lee Mold buckshot cutter
I use the Lee 00 Buckshot mold to cast buckshot. My old fingers don't like to use a utility knife to cut them apart. I built a device to cut them.
[/URL][/IMG]
[/URL][/IMG]
The base is 3/4 plywood, the rest is hardwood. The blades are utility knife blades.
I use a...
Lee Lead Tester
Here is a little contraption I built to hold the microscope with the hardness tester. I had a cheap old scope mount and one scope ring, the flashlight is from Harbor Freight, the large block is two pieces of 3/4 plywood glued together.
[/URL][/IMG]
Gary
Decapping
I use a dillon unversal decapping die to decap all brass. Then wet tumble with ss pins. I only see pins in the flash holes on mabye 1 in 250 cases. I then store it in plastic tubs until I need to load.
Gary
Federal shotgun shell powder
I opened a Federal 00 buck load a while back and the powder looked exactly like the 800x that I have. I may be different but looked the same.
Gary
308 Long Range
I have shot SMK 175's at 1000 yards and I did not observe any key-holing. The 308 is a good economic round for long range. The 6.5 is great but the barrel life is poor.
My approach is to shoot a ladder test and work up a good load from there.
good luck
Gary
Press or Bench Priming Tool
I use the RCBS APS loader that mounts in my Redding T7 Press.
I did not have extra bench space for the bench mounted one.
I have the strip loader and find it no problem to load primers into the strips.
I like the loader as I can easily adjust how deep the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.