Quantcast

jmorris's Recent Activity

  1. jmorris replied to the thread How good are your eyes.

    Yep, better than the link.

    May 23, 2019 at 6:50 PM
  2. jmorris attached a file to the thread Dillon tumbler died... what next..

    Can’t tell a lot from that photo but it looks like the end of the case is crimped. [ATTACH] Might be able to straighten the dimples...

    677BCDCD-BAC9-4A4E-819A-76C0CE1FD0E3.jpeg May 23, 2019 at 6:49 PM
  3. jmorris liked Rule3's post in the thread How good are your eyes.

    That was fun. Shooters' Forum - Error You must be logged in to do that. Log in or Sign up Your name or email address: Do you already...

    May 23, 2019 at 6:46 PM
  4. jmorris replied to the thread Electric bicycles for hunting?.

    I think if they let you use an electric bike seems like they would let you use an electric golf cart. With many hours of driving farm...

    May 23, 2019 at 9:57 AM
  5. jmorris liked Mn Fats's post in the thread Electric bicycles for hunting?.

    I take one of these. Typically the Big Reds. [ATTACH]I'll even take my '72 Polaris 530 sled if there's snow on the ground. Never had an...

    20190403_151914.jpg May 23, 2019 at 9:52 AM
  6. jmorris replied to the thread Trimming down brass that is below the COL.

    Your numbers are under max so all you could add by using them is some unmeasurable amount of neck tension. If you are not checking all...

    May 22, 2019 at 10:24 PM
  7. jmorris replied to the thread mixing lead with 50/50 tin /lead???.

    I have one particular mold I use because I know what weight “certified” lead drops from it. If it drops heavy, I add Linotype. If it...

    May 22, 2019 at 9:55 PM
  8. jmorris replied to the thread Raising Quail.

    I built an incubator that has done a number of batches with 100% hatch rate, using light bulbs a humidifier, a hot dog rotisserie and 3...

    May 22, 2019 at 8:36 PM
  9. jmorris replied to the thread Dillon tumbler died... what next..

    Actually most of the time it’s just the bushing on the counter balance end of the shaft. An oil impregnated bronze bushing is cheap...

    May 22, 2019 at 4:38 PM
  10. jmorris replied to the thread Reactive Targets.

    Yes, exactly. It’s clear as a bell at 300 yards. :)

    May 22, 2019 at 10:24 AM
  11. jmorris replied to the thread Dillon tumbler died... what next..

    For a timer I use one of these....

    May 22, 2019 at 10:17 AM
  12. jmorris replied to the thread Reactive Targets.

    It’s an out of certification high pressure gas cylinder with the bottom cut off. That was a 9mm.

    May 22, 2019 at 10:14 AM
  13. jmorris liked Walkalong's post in the thread Stupid reloading mistake of the week.

    That is usually where they end up, but they can find their way into the oddest places. Things happen. It is good to have a routine that...

    Primer in Gas Tube Pic 1.jpg May 22, 2019 at 10:13 AM
  14. jmorris replied to the thread Stupid reloading mistake of the week.

    Why I post load tumble then case gauge. Any loose pockets, the primer will be gone before the gauge. Only takes one time to understand...

    May 21, 2019 at 11:27 PM
  15. jmorris replied to the thread upgrading one of my presses input needed.

    This is my favorite thing about the 550. [MEDIA]

    May 21, 2019 at 11:18 PM
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice