MarshallDodge
Latest activity Postings Images About
-
-
MarshallDodge reacted to Walkalong's post in the thread Long Range Rifle/Scope/PRS question(s) with
Like.
The newest PRS/NRL-22 rifle combination. We'll break it in this weekend. -
MarshallDodge replied to the thread Drill motor trim tool?.Is the Sierra box UL rated? 😂 That's pretty cool.
-
Its a worm drive automotive power window motor that has had a piece of barstock tacked to the drive shaft after I drilled and tapped it...
-
I have some 6 br brass, although shot in my chamber it should be sizable. Let me know if that helps you out.
-
These are quite good https://www.harrellsprecision.com/products/full-length-die
-
MarshallDodge replied to the thread Drill motor trim tool?.I do the same. Set for 1.759, just below max case length. I believe the little Lee trimmers are closer to 1.750
-
I use a WFT for .223/5.56. I sort of chringed a bit at the cost but it was money well spent IMO. Trimming .223 still isn't "fun" but it...
-
I don't mean to come across as critical, but the discussion of manual safety vs. no manual safety inevitably becomes -- as this one long...
-
-
I always answer this question the same way - I would get a nicer Python!
-
MarshallDodge replied to the thread The manual safety - yet again..I've had issues with the grip safety as well. If my grip isn't perfect, the safety will not disengage.
-
Mini drill press and Giraud Tri-way trimmers work great for me.
-
On the Forster you just turn the handle backwards to remove it and Chuck up the shaft.
-
You didn't wip out a piece of oil bronze and make an upgrade :)
-
I know a REAL gunsmith. The kind of gunsmith you read about, one who does things by the seat of his pants but with a micrometer at hand...
-
-
Loading…
-
Loading…
-
Loading…