Recent content by matworz

  1. M

    X-treme Bullet question?

    ^^^ THEN - before you get carried away... do some dummy rounds and make sure that OAL fits in your magazine and feeds properly.
  2. M

    mixed brass

    8x56R? Are you shooting out of an M95? What powder? I load 8x50R for my M95 and if you're like most of us MilSurp guys, you won't be loading these heavy. I use IMR4895 in my 8x50's and I keep em pretty light. I have 3 or 4 different brands of brass. I use 7.62x54R to make my 8x50's. I've used a...
  3. M

    Powder Burning Rates Table

    Thanks Kernel! All those charts are awesome!
  4. M

    What do you call this?

    My first thoughts went to out-of-battery.
  5. M

    Suggestion for 45acp

    Of your 4 choices, I've used Power Pistol and Unique. Both work fine for me. I've also used Bullseye and HS-6. My next load work up will be with W231.
  6. M

    Can you help me plead my case?

    If the rest of your relationship is in order, do what I do. Buy the equipment, enjoy your hobby. She'll get over it.
  7. M

    Dumb question??????

    Maybe this is obvious, but just gotta say... I loaded a bunch of Spire point .30-30 rounds that I use in my Savage 170 pump rifle. Key is to only load one in the pipe and one in the mag tube. Works fine for me.
  8. M

    What is the best way to prime 338 Lapua brass

    What other calibers have you loaded? How long have you been handloading?
  9. M

    Help with Plated Bullets

    If there is anything wrong with using plated bullets for target shooting, there are thousands of people doing it wrong every day.
  10. M

    Problem with pulling down process

    Needle nose pliers to pull the jackets out? How many are you taking about here?
  11. M

    New reloader with questions

    Most people that I know of, including me, immediately cull and recycle any AMERC cases. I've never seen them in 9mm, but any I get in .45 immediately get squished with pliers and tossed in the recycle bin. The problem I have with them is a complete lack of neck tension and/or the primer pockets...
  12. M

    Berry's Bullet Data

    Fred, do you have a link? I just went to the Hodgdon Reloading center for 9mm and don't see any Berry's plated bullets listed... I'd love to see them referenced by more mfr's.
  13. M

    Berry's Bullet Data

    I don't use the 124gr in 9mm... For the 230gr RN plated (I have used Rainier) my recipe is: Rainier 230gr RN Unique 6 gr 1.255" COL Work great for me in my Bersa Ultra Compact.
  14. M

    Wood blocks for mounting reloading gear

    I like them all separate, so I can move them around when I need/want. It depends on your work area and how much space you have. I used the biggest bolts that would fit in the holes of my presses. For Lee press, I think that may be 5/16 bolts, maybe 3/8, I don't remember. For the press itself...
  15. M

    Berry's Bullet Data

    http://lmgtfy.com/?q=site%3Athehighroad.org+load+data+9mm+luger+124+grain+berry%27s+plated+unigue http://lmgtfy.com/?q=site%3Athehighroad.org+load+data+45+acp+230+grain+berry%27s+plated+unigue ;) LOL. Sorry, in a wiseacre mood today.
Back
Top