Quantcast

Reeferman's Recent Activity

  1. Reeferman replied to the thread Hornady shell plate issue.

    https://forums.brianenos.com/topic/283615-hornady-lnl-ap-powder-jump-fix/

    Jul 10, 2020 at 10:59 PM
  2. Reeferman replied to the thread Hornady shell plate issue.

    It did for me. And I also usually notice things like this but seeing as I’ve had that #32 shell plate since last year and just noticed...

    Jul 10, 2020 at 9:40 PM
  3. Reeferman replied to the thread Hornady shell plate issue.

    I don’t know if you use a case feeder but I do and if spring gets any kink other than a very small one cases won’t feed properly. It...

    Jul 10, 2020 at 9:39 PM
  4. Reeferman liked cfullgraf's post in the thread Hornady shell plate issue.

    I had not thought about polishing and breaking the sharp edges but the only shell plate I have trouble with is the 45 Colt. This might...

    Jul 10, 2020 at 9:36 PM
  5. Reeferman attached a file to the thread Hornady shell plate issue.

    Some of you may already know this and are using them. I found a post on Brian Enos’s site by a guy who has been doing this for many...

    699D898B-0EA8-4334-940D-FD52763D67CF.png Jul 10, 2020 at 9:35 PM
  6. Reeferman replied to the thread Hornady shell plate issue.

    Not sure about Walkalong but all my shell plates worked fine other than the #32 one but I couldn’t go load more than 50 rounds before...

    Jul 10, 2020 at 8:18 PM
  7. Reeferman replied to the thread Hornady shell plate issue.

    Well Dremel, die grinders and lots of other tools I have, not so sure of the steady hand and good eyes though these days. I also...

    Jul 10, 2020 at 7:43 PM
  8. Reeferman replied to the thread I went red. Hornady LNL.

    The majority of those that I have seen in videos who are having so many problems with the LNL and especially with case feeder, when...

    Jul 10, 2020 at 6:49 PM
  9. Reeferman replied to the thread Hornady shell plate issue.

    It’s odd that some shell plates for rim cases have the bevel and some don’t.

    Jul 10, 2020 at 5:47 PM
  10. Reeferman replied to the thread Hornady shell plate issue.

    Mine all have two detents.

    Jul 10, 2020 at 3:54 PM
  11. Reeferman replied to the thread Hornady shell plate issue.

    Walkalong I’ve known about what you did for a longtime. Hornady sent me a sublet last year which I finally got to install awhile ago...

    Jul 10, 2020 at 3:53 PM
  12. Reeferman replied to the thread Hornady shell plate issue.

    I found this when searching. He didn’t follow up on what any solutions might have been. [MEDIA]

    Jul 10, 2020 at 1:57 PM
  13. Reeferman replied to the thread Hornady shell plate issue.

    I’ve never had to do that with the ones I load.

    Jul 10, 2020 at 1:55 PM
  14. Reeferman replied to the thread Hornady shell plate issue.

    My 44 magnum and 38/357 plates have bevel cut into them.

    Jul 10, 2020 at 1:30 PM
  15. Reeferman replied to the thread Hornady shell plate issue.

    I contacted Hornady and they are sending me a new one though they didn’t seem to know why the 32 plate doesn’t have a bevel or if the...

    Jul 10, 2020 at 1:08 PM
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice