Recent content by Steve499

The Gatling firing cartridges pitted against riflemen firing cartridges would have been a fairer contest. Good fun, anyway!

Is it a used one? It looks new to everybody.:) Where'd you pick it up?

I managed to "ring" the bore on one of my rifles. It had been caused, apparently, by a grease cookie I had mashed down on top of the seated bullet. The cookie stayed on the ramrod and came off about 3 inches in front of the bullet. It created a bulge when I fired it that way, but the bulge was...

Smile when you call me that, pilgrim!

I have a cleaning attachment I got from Dixie Gun Works which is just a plastic hose fixed onto a fitting which threads into the barrel after the drum and nipple is removed. With the hose end submerged in hot water, you can pump it in and out of the barrel with your patched cleaning rod. I...

My last range session with my 1861 Springfield, I fired some of the best groups I've ever shot with it and I was lubing the grooves as well as filling the base level with the same lube Sharps59 mentioned. I'm not prepared to credit the improved shooting to the lube filled base, though. I'm sure...

Percussion revolvers have chamber diameters, at least in theory, larger than the bore diameter. The ball is supposed to be oversize to fill the chamber which in turn makes the ball oversize for the bore. The ball should be rammed into the chamber bare and should leave a ring of sheared lead...

Don't know where you are located English Bob but If you are in the U.S., Pedersoli's warranty gunsmith is Lee Shaver in Lamar, Missouri. http://www.egunsmith.com/ You might give him a call, He's the kind of guy who's a friend you just haven't met, yet.

I might have to look into making one for my pocket navy. I had absolute fits with it blowing caps rearward and having them get down in front of the hammer in the hammer cut. I think I have it mostly fixed now but a modification of this sort would pretty much stop that from happening. I'd have to...

Somebody over on http://britishmilitariaforums.yuku.com/directory could probably fix you right up.

It's hard to see but does the ring itself become a sort of transfer bar and strike the cap? The screws in the bottom would allow it to have forward play if it was thin enough, but it would seem to me that it would require quite a bit more hammer force.

I'm a retired State Trooper, worked 27 years. I worked for two Sheriffs as a Deputy Sheriff before that. I'm pro gun and always have been. I believe in concealed carry for everyone with a near religious fervor. Regardless of what we'd like at the above mentioned " live crime scene," the...

Based upon the numbers his mom sold, Jessie James carried a different revolver every week. Must have been something like when the President signs a bill with a bunch of pens.:)

Dang! Something's always disqualifying me.

Funny! Maybe you could rig up a sling swivel on a lug under the barrel, sort of like the express rifles have, and hook a sling in it with a stirrup on the bottom end. :eek:Make sure you have your foot in the stirrup when you shoot or it might swing in an overhead arc and break something...