I have had this problem but it was the first and last dies that it did it on. First thing to do is make sure the shell holder opening is facing the 9:00 position. See if this helps. If it continues move all the dies down one station to see if it still does it on that die station hole or if it's...
This is not old news. If you look at the date, it is the official publication of the Change of the Regulation and request for input from the public. This is the official start of the administration change process. Up until today, it has been all talk and no action by the DOI.
If it's a little black smudge line, then it is most likely tarnish. The seating die will make contact with the brass and acts as an abrasive against the brass. This is normal and happens on all my brass and that's because I don't put a liquid metal polish to clean/tumble the brass first. I only...
You don't need to buy check weights as you probably already have them in your pocket.
http://www.usmint.gov/faqs/circulating_coins/index.cfm?flash=yes&action=faq_circulating_coin
I found a 2007 penny in my pocket that weighed exactly 2.5 grams just as it is listed by the U.S. Mint. I...
You know when we were so concerned about the plight of the third world in middle part of the last century, we sent them those new drugs called antibiotics. It helped them all right. Cut the death rate in half, but the birth rate remained the same. Population grows exponentially. The world...
I was told that it would take three weeks when I ordered from Precision Delta. I was willing to accept that. Then when the three weeks was up, they said it would take another week. Then today. It will take another week or more, That I won't accept. Trust is the only commodity a business has...
Has anyone else ordered from these people? I placed an order about 5 weeks ago for 9mm bullets. I called them today and they said maybe next week. That would make it six weeks at the earliest from the time I placed the order.
From the Houghington Post who Had an amicus Brief Before the Court in favor of the District and no friend of liberty:
"What still stands out to me three days after the argument, however, is that there was broad support from all sides for all current and proposed regulations concerning guns...
It comes from Alan Gura:
MR. GURA: The legislature has a great deal of leeway in regulating firearms. There is no dispute about that.
JUSTICE STEVENS: May I ask this question? Are you, in effect, reading the amendment to say that the right shall not be unreasonably infringed instead...
Gura was inept. You cannot argue that the handgun ban in the district is unreasonable, while at the same time guns "not suitable for civilian use" ( That is the District's Argument) can be outlawed and that you can ban guns on campus , you can ban armour piercing bullets, that you can license...
It all depends on where you live in relation to a retail store. The closest retail store to me would cost about $20+ in gas at today's prices so, there is no real savings in driving there.
The audio tapes will be released to a media pool right after the arguments so all the major networks including C-Span will have access to them. C-Span radio lists the oral arguments for its Tuesday programming.
If it were me, I would put the turret press back to the way it is supposed to work and check to make sure you have the dies in the right order. Even the powder charging die will seat the bullet and pour powder at the same time if you get the dies out of sequence. You need to eliminate the...
What's good for the Goose...
An informant told me that Cathy Lanier has unlawful NFA and destructive devices in her house and kiddie porn on her home computer. I say that she volunteer's her house for all the citizens of the District of Columbia to inspect.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.