Which Scope rings for CZ99 22LR to pair a BSA SWEET 22 Scope?

Status
Not open for further replies.
vikingcanuck

vikingcanuck

Member
Joined
Oct 18, 2017
Messages
6
Location
Canada
howdy from Canada first of all
just wanted to say great sight here!

Ok im seeking advice on a set of scope rings for my CZ99 22LR?
which will fit?

its a Serb 22LR rifle made under different names reming and few others so i have learnt 3/8th groove i think

I was looking on ebay at the BSA Sweet 22cal scope 3x9x40mm which i think pairs well for the price
Ok i just need set of proper rings for it in size and in height for the scope i looking at
so if anyone could send me a link to amazon or ebay which rings will work with that scope and my gun
it would be greatly appreciated

Vk
 
I have two of the Zastava made rimfire rifles. A Zastava MP22 and a Remington Model 5. They are the same gun as your CZ99, just imported with different names.

They all have 11mm dovetails. The receivers where the dovetail is cut has a rounded top, so I'm not sure that adapter rail you show in your second post would fit due to the underside being cut flat and having what appears to be low clearance.

I have used air rifle rings on one of my Zastavas with good results. The other one I've used vertical split rings with good results.
 
I'll try and post what I have a bit later when I have access to my laptop.

By the way, I mention air rifle rings because most break barrel air rifles have round top receivers and are cut at 11mm spacing.
 
Last edited:
vikingcanuck said:
heres something i was hoping might werk for my CZ99 22Cal anyone care to let me know if it will or not fit my 22?

http://a.co/ee5bHbm
Click to expand...

In hindsight, I see that has a scope stop screw. That means it's meant for air rifle duty, which also means there may be enough clearance for a round top receiver. Break barrel air rifles tend to have tubular receivers with the scope dovetail cut into it.
 
Just for your reference, here are the two inexpensive scope ring set ups I've used. Both are with a 2-7x32 scope which is smaller than the 40mm objective you are looking into.

From an air rifle I have, these are what is shown on the gun below - https://www.pyramydair.com/s/a/Leapers_Accushot_1_Rings_Medium_3_8_Dovetail_4_Screws_Cap/793

Plenty of clearance for a 40mm objective, I would think. It clears the round top receiver well.
View attachment 765885

Here is a lower set on the same gun and same scope that works well for 32mm objectives. Still clears the round top receiver very well.
https://www.opticsplanet.com/leupold-3-8-ring-mounts-57405.html

View attachment 765887
 
Last edited:
Status
Not open for further replies.

Similar threads

TRX
  • Locked
Scope rings for BSA rifles
Replies
3
Views
3K
TRX
TRX
Frulk
  • Locked
Scoping .22 Mag Ruger M/77 International
Replies
10
Views
349
Varminterror
Varminterror
S
  • Locked
Rossi Matched Pair .22LR + 20ga - Part II: Scope and Rings
Replies
0
Views
2K
sabatier
S
4
  • Locked
Bases and rings and scopes, OH MY!
Replies
0
Views
1K
45Badger
4
R
  • Locked
Which scope rings for M1A: Burris Signature or Warne QR?
Replies
4
Views
1K
madcratebuilder
M
Back
Top