Shooting the 6.5 Creedmoor out to 1000 yards

Status
Not open for further replies.

TheDomFather

Member
Joined
Feb 22, 2017
Messages
469
After a year of working on load development and learning, learning and more learning. I finally took it out to 1000 yards to qualify at the range this weekend. I've learned a ton as a new shooter. I want to thank everyone on the high road who helped along the way. Attached is the video of me shooting out to 1000 yards for the first time. Note: in this video I did miss all 3 shots at 1000 when I went back the next day and shot it again I realized there is a hit indicator on the target (flashing light) it is very tough to see your misses at this distance even dialed all the way up to 25x magnification on my Kahles 525i scope. Its very helpful to have someone with a spotting scope to help. there was virtually no wind this weekend but beyond 800 yards you do get a little spin drift from the rotation of the bullet causing it to drift right a bit.

 
Frontline Defense! I am a member there, and I have met you several times. Didn't know it was you.

I have been shooting 223 out to 700 yards there, and have been thinking of getting a 6.5C rifle so I can go farther. You have a nice setup!
 
Frontline Defense! I am a member there, and I have met you several times. Didn't know it was you.

I have been shooting 223 out to 700 yards there, and have been thinking of getting a 6.5C rifle so I can go farther. You have a nice setup!
Thanks bud look forward to seeing you there again!
 
That was your hold, but what was your call - what windspeed? Frame rates kind of mess with the mirage, so it’s hard to tell on video whether the indicator is lying or not.
There was virtually no wind. Just holding for spin drift.
 
So you’re holding .4mil spin drift at 1,000yrds? Sure looked like the mirage was rolling across the field in the video, and your impacts on target were progressively drifting across the plates as range increased. Spin drift at 1000 should only be 6-7” for that load, if you were holding left edge and hitting right edge at 700 and 900, then giving up the left edge and still slipping off the right edge at 1000, you would be drifting more than 18”. That ain’t spin drift - that’s a 3-4mph wind you didn’t hold for.
 
I agree with Varminterror… with the left to right mirage I could see in the video, I would have allowed more than left edge holdoff. Mirage is the best wind flags you have at long range when "the wind" drops down. Take your spotting scope and simply lay down and move the focus in and out from 300-1000 as others shoot and watch their impacts as compared to the mirage changes. You will be surprised how much wind is really out there even if the wind flags or socks are lying dead. Forget about spin drift. wind and mirage are your biggest enemies at long range and if you are not watching and adjusting for them your loosing.

Nice setup though. Keep shooting and gaining experience and you will have a ball shooting long range.

Steve
 
With that glass you should be able to see your hits fairly easy the misses can be pretty hard to see depending on the back stop. In dirt you can usually see them but if you are shooting into grass you can forget it. Keep working on it you are coming along very well.
 
I shot at this range last weekend, and the combination of mirage, sun angle, and wet ground made it virtually impossible to see where the bullets hit the berm. I can't wait until it warms up a bit and the ground drys out.
 
I shot at this range last weekend, and the combination of mirage, sun angle, and wet ground made it virtually impossible to see where the bullets hit the berm. I can't wait until it warms up a bit and the ground drys out.
Thats our problem our berms are clay so you dont really see the dirt kick up.
 
You guys that are having issues spotting your shots due to lack of impact evidence... have you ever tried to watch the bullet trace in the air? If you never have, back off on your scope power a little to make it easier at first. Pull the trigger and look back through the top of the scope ASAP and look for the bullet trace. With some practice you can do this 95% of the time regardless of the condition of the ground. You have plenty of time when firing at 1000yds. At 600yds it is tough with dealing with recoil and shorter time of flight.

Wasn't sure if ya'll were aware of this or not. If you are, not a problem and sorry to waste your time.

Steve
 
You guys that are having issues spotting your shots due to lack of impact evidence... have you ever tried to watch the bullet trace in the air? If you never have, back off on your scope power a little to make it easier at first. Pull the trigger and look back through the top of the scope ASAP and look for the bullet trace. With some practice you can do this 95% of the time regardless of the condition of the ground. You have plenty of time when firing at 1000yds. At 600yds it is tough with dealing with recoil and shorter time of flight.

Wasn't sure if ya'll were aware of this or not. If you are, not a problem and sorry to waste your time.

Steve
Oddly,
I found this much easier with my .22LR, Last I had my Ruger precision rimfire out I was able to see most of the bullet traces out to 300 yards. I will back off the zoom but I didnt see any of these with the 6.5 Creedmoor.
 
Definitely helpful to work in teams and have your spotter make calls. I know with some of my lighter sporter rifles there’s no chance in seeing the vapor trail or splash. I can only look for the result a second or two after I regain my line of sight.

Keep up the good work.
 
Status
Not open for further replies.
Back
Top