S&W model 1905 and later model 10 grips and plate screws interchangeability

Your Model 1905, 4th change, is a K-frame. Any Model 10 grips will fit (or any other K-frame grips). Just make sure you obtain square butt or round butt grips, whichever one yours is (most likely square butt). Your 1905 is a 5-screw gun, with 4 in the side plate and one in front of the trigger guard. The top side plate screw was eliminated in 1955. The trigger guard screw was eliminated with the introduction of the Model 10-4 (tapered barrel) and 10-6 (heavy barrel). Side plate screws should be the same from any M&P revolver from around 1910 through 1954. The bottom rear and front side plate screws "will" interchange, but they won't "work". The front side plate screw must always be placed in the front side plate hole. Obviously, the top side plate screw has a larger head to hold the side plate in place.