What is your dream revolver?

Status
Not open for further replies.
Mmm. Something along the lines of a S&W 640 Pro, but in 9x19 Luger, a 3" bull barrel (I forget what it's actually called), and a round butt frame, with no underlug or halfed underlug.
 
Wow! Pictures please!!!
Not great pics, but tolerable. The one from '66 (right) is actually the worse looking of the two I bought. The '73 one is even prettier than it is, and it was clean.The '66 will get a look over and total cleaning on Sunday...Notice the grip on the right gun compared to the one on the left, not nearly as nice. I paid a lot more for the older gun, which came in the original box with all the stuff in it.
iY13WI.jpg
Only flaw on the '73 seems to be a little peen on the ejector star. Someone playing "detective" and slamming it shut?
Z0ct2K.jpg
Doesn't seem to affect anything. I can't tell when that ratchet pad/tooth is engaged with the hand all hammer pullbacks feel the same. The hand has zero wear on it, BTW.
 
I decided to live my dream about ten years ago and bought my first Korth after having shot a few in the 30 years preceding the purchase. In the meantime my Korth collection grew to well over one dozen and I now wonder why I wasted 30 years before I bought my first own Korth. Among all my revolvers, however, it is not a .357 Magnum Korth that I like the most but a 1969 vintage Korth Sport in .22 l.r., the Korth that started it all for me.

xdvF2rDh.jpg

xVZqhZAh.jpg

E4vSz22h.jpg

That doesn't mean, that I do not like my S&W revolvers anymore. The rare Raymond Sassia model 19-3 version with the three inch barrel is definitely a great gun.

Xb1XiLkh.jpg

...and in single action the 1952 vintage K-22 can shoot side-by-side with any gun, matching the mechanical accuracy of my Hammerlis.

OnlLBZeh.jpg

Life is too short to just dream, life is for living the dream!
 
Then there should be a cylinder latch in front of the cylinder -- but there are no latches at all.
Aren't you talking about the Korth post?

Many Korths have the release beside and parallel to the hammer. Look for the rounded knob beside the hammer in the photos.

Also found at the end of the ejector rods on some.


Todd.
 
I had a no dash M60.
Bobbed the hammer.
Carried it a couple yrs.
Nice gun. Think it had Pachmayr compacts on it.
Of course now the ol lady says she wants a stainless J frame hammerless ..................
 
Aren't you talking about the Korth post?

Many Korths have the release beside and parallel to the hammer. Look for the rounded knob beside the hammer in the photos.

Also found at the end of the ejector rods on some.


Todd.

Todd,

Willi Korth had his revolver lockwork completed in 1969, it included the roller for the double action, from the outside adjustable rebound spring, short shroud on the ejector rod housing, and the cylinder release was moved to the upper right side of the frame. Before 1969, the cylinder release was doing double duty as ejector rod.
 
The new hasnt worn off my current dream revolver.
I took it out for a sunny Sunday afternoon woods walk and found the first shed antler of the year. Pictured here with my 2½" model 66 s&w
 

Attachments

  • 20200216_163120.jpg
    20200216_163120.jpg
    145.2 KB · Views: 32
  • 20200216_163042.jpg
    20200216_163042.jpg
    164.1 KB · Views: 31
  • 20200216_162935.jpg
    20200216_162935.jpg
    152.9 KB · Views: 31
Status
Not open for further replies.
Back
Top