Dan Wesson 15-2 problem

Status
Not open for further replies.
That's part of the beauty of the DW revolvers. You can completely take them apart and put them back together so easily in minutes. It's the only revolver out of 10 I've had the courage to completely disassemble.
Ain't that the truth. No magical sequences only whispered about in dark corners. No requirements for both hands and one or two of a small boy to boot. Don't even need drawings since it is all so intuitive.

That, accuracy, quality of build, beauty and then of course... the barrels. It truly IS a wonder that it never took off more than it did. I used to love the days when you could get them on the cheap because the Colt/S&W cabal of owners had so effectively put them down.

Todd.
 
That's part of the beauty of the DW revolvers. You can completely take them apart and put them back together so easily in minutes. It's the only revolver out of 10 I've had the courage to completely disassemble.
357's on down, don't try it with the 44 or SM's they have a drop out trigger group and it requires a 3 hand or 2 hands and a long thin screwdriver in the mouth to put back together, check out danwessonforums.com
they have tutorials for the Supermags and 41,& 44's.
 
357's on down, don't try it with the 44 or SM's they have a drop out trigger group and it requires a 3 hand or 2 hands and a long thin screwdriver in the mouth to put back together, check out danwessonforums.com
they have tutorials for the Supermags and 41,& 44's.
Right, I meant the my small frame/ 357.
 
That's part of the beauty of the DW revolvers. You can completely take them apart and put them back together so easily in minutes. It's the only revolver out of 10 I've had the courage to completely disassemble.

I've done it on S&W and Taurus revolvers too, but the DW 15-2 was the first, by like 25 years. I didn't have the courage to try it on an S&W until Youtube videos showed me the way.
 
When I bought a pre-owned DW 15-2 V 6" in the early 80's it was in 99+% Condition and was about 60% of the price of a new S&W 586. To this day I think it's the best money I ever spent on a firearm. I don't know if I stole it or that was the norm then but I don't know how you beat the value I've gotten over the last 40 years.

In my opinion, the finest revolver ever built and almost no one knows...
 
I've done it on S&W and Taurus revolvers too, but the DW 15-2 was the first, by like 25 years. I didn't have the courage to try it on an S&W until Youtube videos showed me the way.
I got a Smith ultralight and foolishly took it completely apart to thoroughly clean and lube, BIG mistake, couldn't find any good tutorial, kept putting it together and wouldn't turn the cylinder, found the hand has a small(tiny) appendage that must be in the down position to engage a spring to operate the hand correctly, thankfully I was only charged $20!
 
I messed up and took apart a used Astra Terminator .44 I had bought that had a sticking trigger, and ended up having to take it to the LGS and pay to have it put back together. It was kind of embarrassing. Once I got the solidified goop out of it, and it was back together, it was a decent gun that was problem free. I ended up making a nice profit on it after some guy came over to look at a S&W 66 I was selling and he fell in love with it;. He bought both of them. He's gone now, so I have no idea where those guns went..
 
Wow lookie what I started!
This has become a really interesting informative thread on Dan Wesson's in general.
As far as getting other barrels I've always found it more affordable just to buy another Dan Wesson with the barrel you want:evil:
 
Wow lookie what I started!
This has become a really interesting informative thread on Dan Wesson's in general.
As far as getting other barrels I've always found it more affordable just to buy another Dan Wesson with the barrel you want:evil:
That's a funny note. It seems that whenever I want a particular DW barrel.... All I can come across is stainless when I want blued or vice versa. At least twice, I've gone ahead and bought a whole pistol.

I too have gotten some interesting input from the thread-drift. Thanks for not asking it to be closed like some folk do.

Todd.
 
Wow lookie what I started!
This has become a really interesting informative thread on Dan Wesson's in general.
As far as getting other barrels I've always found it more affordable just to buy another Dan Wesson with the barrel you want:evil:
Right, a new barrel for $300 or a complete gun for $500. You can make more parting your DW out than selling it complete and why there are plenty of parts available.
 
One of my 15-2's was a barrel assemblyless frame that I bought to make a 4" VH gun. Later on, I found a supposedly messed up 6" VH barrel that had been red loctited on the muzzle nut, but in great condition otherwise and I did have to replace the nut as it was damaged by a previous owner, but the barrel and shroud were fine. So now I have 3 guns and 6 barrels total. 4" and 6" for all three of them, all factory. I would like to find a 4" VH stainless barrel to make both 4" and 6" VH barrels for all three guns. When I find one, the price is insane. I could get an EWK for far less.
 
I'm gonna try to remember to take some pics of my 715 and 15-2's this morning before bed and post them. You'll be amazed at what $269 bought me in 2006.
 
P1050018.JPG
Ain't that the truth. No magical sequences only whispered about in dark corners. No requirements for both hands and one or two of a small boy to boot. Don't even need drawings since it is all so intuitive.

That, accuracy, quality of build, beauty and then of course... the barrels. It truly IS a wonder that it never took off more than it did. I used to love the days when you could get them on the cheap because the Colt/S&W cabal of owners had so effectively put them down.

Todd.
True and an exceptional example I put on the Hand guns for sale forum :) The DA trigger is better than most Pythons on my example (no stacking) and very good in SA with a crisp 3 pounds and no over travel.
 
Last edited:
View attachment 895022
True and an exceptional example I put on the Hand guns for sale forum :) The DA trigger is better than most Pythons on my example (no stacking) and very good in SA with a crisp 3 pounds and no over travel.
I saw yours and thought: If only it were closer.....

The many and overlapping benefits of these pistols has fortunately still, not been reflected in their realized prices. Though they are going up. Sadly to me and those like me.

Todd.
 
Well the pistol Pac were never cheap . I bought mine New Old stock around 1986 as I remember . It was made in 1979 but the gun shop recieved it from distributor about 1983 and had it priced over $600 as I remember I waited 3 years as it gather dust before the owner lowered the price to $500+ tax (there were no license fee back then :) ) I was all ready owner of a couple Pythons; a 6" and a 2.5" and fired them pretty regularly . I shot a box of .357s thru the 6" barrel of the DW it had on it and sighted it in , indoor range at 25 yards, and found it was as accurate as the 6" python from bags !!. I fired a cylinder or two out of the other two barrels to make sure everything was good , detail stripped the gun and was startled in the ease of doing so. It the went into my (only) gun safe with a mental note to have it be the last .357 I owned when I got old as it did everything and I could maintain it. Well I got old :( I would pull it out of safe every 5 years or so and oil it with Balistol (I used it since the 70s) and played with the other guns. I bought an 8" polished nickeled NIB Python in the mid 90s but never shot it much as the prices on them were climbing .
In the 20teens I sold my well used and maintained Pythons for a lot , double or more than I paid, finally sold the 8" a couple years ago , virtually new for $2500 and thought about the stashed M27-2 5" .357 and 4" Colt Model ".357" and the DW I still had. I still had the 5" M27-2 in the wood presentation box in real pretty shape and the wonderful better than Python Colt .357 with the Fuzzy Farrants on them . With the rising price of the M27s I just sold that recently to finance my month in Mexico :) and thought about the next choice of the old Colt .357 4" which I love and the DW Pistol pack which will do anything and is like new. I decided to stick with the Old 1953 .357 4" Colt and sell the DW . It is on GB for a $1600 buy now , I was giving THR guys a break . We will see how it goes , I have no doubt it will sell over $1000 . I have around 200 guns to sell left, the kids all ready got theirs. I am 74 and want them all gone within next 5 years so I only have maybe 6 remaining and those wont be the expensive ones .
When the grim reaper calls for me I will be holding the lower value stuff that still works well for my uses. , rather than the high dollar /collectible stuff which will be gone and the $ spent . The fighting guns are pretty much distributed to kids in the free states allready. , I of course have access to them . The Dan Wesson is a very kewl do all pistol (with the Pac) that the average enthusiast can maintain and it is robust and crazy accurate design. The Monson made early ones are very carefully made and finished.
PS : I forgot about my 2.5 " Nickel Model 19 !! That will go after the Colt 357 ! Also got a Ruger .357 3 screw somewhere :)
 
Last edited:
For less than half of the money you made between buying at $269 and selling at $1600 View attachment 895484 you could buy another nice 15-2 w/o pack and pocket $700. I got this one with a 6" vented barrel last year for under $500.


I paid $500 + tax in 1980s dollars for that Pistol Pac DW 15-2 , if you read correctly . With GB charges (I featured it and highlighted listing ect. = quick sales) and shipping I got just under $1500 = 3x investment in 30* years.
At 74 I am selling before things change in a bad way and it is even more difficult to do so. I have other .357s : an S&W 19 2.5, a 1953 Colt .357 4" , and a 60s Ruger 3 screw 6 1/2" Black Hawk. By the time I am 80 I just want one of those left :)
 
I remembered and took some pics of the 715 and the prettier of the two 15-2's that I could get to without digging through the stuff in the safe.
The junk wrench that came with it, I have a bunch of the good ones too..Just the one grip, the others are in my parts drawers: check out the sights. About 100X stronger than the original: Both are nearly in mint condition. The 15-2 was at a Columbus,OH gun store and had been sitting there forever and I offered $350 for it about 10 years ago, and the owner said, " Cash? Get it out of here!" The one I didn't take a pic of looks good too, just not as good as these two do..
f4aRm0.jpg
MObZIg.jpg
5RQFZ2.jpg
GWCayl.jpg
 
I paid $500 + tax in 1980s dollars for that Pistol Pac DW 15-2 , if you read correctly . With GB charges (I featured it and highlighted listing ect. = quick sales) and shipping I got just under $1500 = 3x investment in 30* years.
At 74 I am selling before things change in a bad way and it is even more difficult to do so. I have other .357s : an S&W 19 2.5, a 1953 Colt .357 4" , and a 60s Ruger 3 screw 6 1/2" Black Hawk. By the time I am 80 I just want one of those left :)
Had a senior moment and confused Hemiram's post with yours. My apologies:oops:
 
Dan Wesson arms revolvers monopolized the winners circle for several years with revolvers notable for extreme chamber/bore alignment, firm throats, topnotch barrels, low recoil, and fast lock time. Factory service stations a feature of International Championships. M40 Super Mag .357 Maximum on work bench.

Bradshaw344_zps226f0734.jpg
 
Status
Not open for further replies.
Back
Top