AR trigger upgrade?

Status
Not open for further replies.

brewer12345

Member
Joined
Nov 29, 2015
Messages
2,749
How hard is it to install a drop in trigger group? I am definitely mechanically challenged, so would be interested in something that is largely idiot proof. I may want something better than the stock trigger on my low rent Aero lower.
 
Easy, one doesn't even need tools most of the time. Sometimes depending on how tight the holes and pins are one needs a light tap from a hammer to get the pins to go through. The most common problem is not getting the hammer spring set right, but if you search for a tutorial online and pay attention to the spring orientation on the hammer it won't be difficult. I use my right hand to hold the trigger group assemblies in place and manipulate the holes to line up while pushing the pins in with my left hand.
 
Brewer

what corner of the world are you in....a local forum member may be willing to help...

best
 
Drop in triggers are easier to install compared to a GI style trigger since the springs are self contained in the drop in. Easy Peasy. As others have mentioned, if your drop in trigger of choice does not include anti-walk pins, get some to go with the trigger.

I won't be much help on what brand or type of drop in trigger to get since I have never messed with them other than helping others install them.
 
Last edited:
Thanks, guys. I have to get the rifle out and shoot it with the new upper before I decide on whether to upgrade the trigger. I am not much into ARs and haven't shot mine in a few years, but I decided to put together a deer hunting AR together based on 350 Legend. Will sight it in and think about the trigger as I do so. I know what a huge difference a trigger update on my 10/22 made, so we will see. If I do decide to upgrade and blow it, I can always take it to my local range and have them deal with it. Just been trying to stay out of crowded indoor spaces these days.
 
I have short, stubby, seriously clumsy fingers, I really do. I was able to install a Timney in my AR though with minimum muss and fuss. The tool that came in handiest for me was a dental pick I used to pull two springs out of the way to install two screws.
 
Super easy. About 2x harder than changing a light bulb or TV remote batteries.

Also, 100% agree with getting a POF trigger. Comes with the 2 screws and Allen wrenches needed.
 
Brewer,

I know you are asking about dropping triggers. But don't overlook the more standard GI type triggers either. And they are not hard to install either. I can say from personal experience that the Larue MBT-2S two stage triggers are very nice especially considering they are $80. The Larue, Geissele G2S , and Rock River two stage triggers are very popular.
 
And before I forget.

I have seen a lot of heated conversations on what brand/type of trigger is best. Ideally one would be able to go to a store/shop and try as many different triggers that are available. You can have 10 people try a certain trigger and get 10 different opinions. It boils down to personal preference, there is really no right or wrong answer.
 
Actually, some places do just that. One shop near me has about a half-dozen drop in's in a display that allows you to try them, kind of like the BX-22 10/22 displays. When my Dad called and asked if I wanted to buy the Rage 140 he had, (changed his mind as usual) , I jumped on it because I had tried one there.
 
Brewer,

I know you are asking about dropping triggers. But don't overlook the more standard GI type triggers either. And they are not hard to install either. I can say from personal experience that the Larue MBT-2S two stage triggers are very nice especially considering they are $80. The Larue, Geissele G2S , and Rock River two stage triggers are very popular.

+1

Standard GI style triggers are not hard to install. I watched a youtube video and five minutes later I had the FCG properly installed. It is a little awkward to get everything to line up correctly the first time, but after doing it several times it becomes intuitive.

The Larue MBT-2S is the best trigger you will find for $80. There are much better triggers available, but they will cost 2X or 3X as much. I was so pleased with my first Larue that I bought two more.
 
Triggers....no money concern Geissele, value for the money Larue, best low dollar AGL.....(AGL ACT on the left, Larue on the right...when money is not an object, a Geissele to build....). Put together to prove I could do it (I did), and to help my friends decide when they were looking for triggers....

I do own all three, and Rock River NM....

upload_2020-8-1_11-16-57.jpeg
 
It took me about 45 minutes to put together an AR lower from start to finish, you can do it too. Take your time, watch a few different AR-15 videos and you'll be pulling a new, smoother trigger in no time :thumbup:.

La Rue has a 1 for $80, 2 for $75, 3 for $70 deal going on if you have more than one.

Stay safe.
 
I truly "drop in" trigger should be very simple. However, even a "regular" style aftermarket trigger shouldn't be too bad. I am mechanically challenged myself, and with a little patience I didn't have any issue installing a Geissele G2S in my AR. That or a LaRue would be my first choice for a 2 stage trigger without breaking the bank.

One thing I will add, though, a lower vise block will make your life easier. I did it without one so it's not necessary, but you'll have to do less fiddling with it if you have it nice and steady and don't have to hold it in place yourself. I have a Magpul BEV block, but you can get cheaper ones that will do the job.
 
I stick with the Rock River NM and Varmint (both 2-stage) for my rifles, ALG for the kids’ builds, both the ACT and QMS, plus one Jard flat face.

All are an improvement so pick what suits your preference and purpose.
 
Status
Not open for further replies.
Back
Top