Guns that are not made anymore that I would buy
- Thread starter nettlle
- Start date
- Status
Some of these guns are still not that hard to find on the used market.
While Winchester redesigned the model 70 in 1964 they brought the original design back in 1992. I would argue that the 1992-2006 rifles were better than the pre-64's. They are easier to locate and usually priced better. When FN resumed production in 2008 they tweaked the design slightly so the 2008-present model 70's aren't perfectly true to the original design. But they are still a very nice rifle that is a better rifle than the pre-64. Kimber, Ruger, and others have reintroduced CRF designs based on the model 70 since the 1990's as well. Since 1992 the mystique of the pre-64 rifles has been greatly diminished.
There are 2 that come to mind for me. One is the Savage 99. They do show up used from time to time, but many are late production budget versions, others are priced well over what I'm willing to pay. And unlike the Winchester 70 I don't see anyone re-introducing a faithful copy at a price I'd pay.
Another is the Ruger Security or Speed 6 revolver in 357 mag. Those were under rated revolvers back in the day, but were every bit as good as the K frame Smith revolvers. They used to sell for considerably less than the Smith, especially used. I actually had a couple back in the day and let them go for whatever reason. My logic at the time was that I could always pick up another dirt cheap later. Unfortunately prices on used versions have gone over what I'd pay right now. If you can find one for sale.
While Winchester redesigned the model 70 in 1964 they brought the original design back in 1992. I would argue that the 1992-2006 rifles were better than the pre-64's. They are easier to locate and usually priced better. When FN resumed production in 2008 they tweaked the design slightly so the 2008-present model 70's aren't perfectly true to the original design. But they are still a very nice rifle that is a better rifle than the pre-64. Kimber, Ruger, and others have reintroduced CRF designs based on the model 70 since the 1990's as well. Since 1992 the mystique of the pre-64 rifles has been greatly diminished.
There are 2 that come to mind for me. One is the Savage 99. They do show up used from time to time, but many are late production budget versions, others are priced well over what I'm willing to pay. And unlike the Winchester 70 I don't see anyone re-introducing a faithful copy at a price I'd pay.
Another is the Ruger Security or Speed 6 revolver in 357 mag. Those were under rated revolvers back in the day, but were every bit as good as the K frame Smith revolvers. They used to sell for considerably less than the Smith, especially used. I actually had a couple back in the day and let them go for whatever reason. My logic at the time was that I could always pick up another dirt cheap later. Unfortunately prices on used versions have gone over what I'd pay right now. If you can find one for sale.
Trey Veston
Member
S&W 625 Mountain Gun in .45 Colt...
JCooperfan1911
member
- Joined
- Oct 8, 2020
- Messages
- 2,709
Nylon 66.
What I'd give for a reintroduction that was identical with the expecting of the vastly improved and long lasting polymers of today, and maybe some internal changed to simply the disassembly process.
Maybe make the barrel fixed to the receiver to eliminate the scope issues. But keep the campy wood grain! It's fun. Of course an obligatory black tactical model would be needed to survive the modern market.
What I'd give for a reintroduction that was identical with the expecting of the vastly improved and long lasting polymers of today, and maybe some internal changed to simply the disassembly process.
Maybe make the barrel fixed to the receiver to eliminate the scope issues. But keep the campy wood grain! It's fun. Of course an obligatory black tactical model would be needed to survive the modern market.
Crazy think is, glass reinforced polyamide 6/6 (nylon 66) is still the go to material of tool manufacturers for all sorts of applications.
For me, another vote for the Colt 1903 and 1908. Also,
Marlin model 60 (which I would think Ruger will make again)
Ruger Security Six
JCooperfan1911
member
- Joined
- Oct 8, 2020
- Messages
- 2,709
I don't think its glass reinforced? Not sure, but the Nylon 66 plastic does not hold up over time and the stocks are statting to get brittle with each day. We have far better plastics now.
giggitygiggity
Member
- Joined
- Mar 18, 2009
- Messages
- 2,251
This is a great thread. There are definitely a few guns that keep popping up in people’s posts. Hopefully manufacturers see this thread. I think that if a manufacturer could reintroduce some of these guns for $1000 or below, they’d sell like crazy. Understandably, it’s mostly wishful thinking as I suspect the profit margin in significantly higher with polymer pistols than it is with guns of steel and wood. I am curious as to the number of re-released Colt Cobras, Pythons, King Cobras, and Anacondas that Colt sold and what their profit margin is. Although consistently priced above MSRP and not facing immediate threat from gun control advocates, the snake guns seem to sell out quickly when they come into stock. My point is that if H&K re-introduced a P-7, even at $1500 or so, it would still be a brand new gun and priced well below the $2500+ that they’re valued at and selling for today.
My suspicion is that manufacturers certainly can produce iconic guns, but that tooling, researching, training employees, etc is too much of a burden and that greater profits can be achieved by selling guns of simpler and more modern designs and materials.
My suspicion is that manufacturers certainly can produce iconic guns, but that tooling, researching, training employees, etc is too much of a burden and that greater profits can be achieved by selling guns of simpler and more modern designs and materials.
barnett
Member
P&R model 47
entropy
Member
That is the correct Croatian pronunciation. Unlike some Perazzi owners who spaz if you say pe-razi instead of the correct Pe-RAH-tze, with a slight roll to the 'r' and the emphasis on the 'rah', most Ljutic owners just say Loo-tic.
P5 Guy
Member
S&W 3906. Why S&W only made a couple thousand of this model confounds me.
WheelGunMan
Member
Sig P239
redneck2
Member
I had two of these, both pristine. Had a hell of a time selling them. The mint one in .300 Savage sold for $425
The extremely pristine, limited edition, presentation grade .250-3000 made in 1916 sold for $1,100.
Everyone wants one until they’re actually available. Then, no one has the money
earlthegoat2
Member
Colt Diamondback
Ruger 44 Carbine or Deerfield Carbine
IMI Timberwolf 44
Stevens 520
Winchester Model 12
Ruger 44 Carbine or Deerfield Carbine
IMI Timberwolf 44
Stevens 520
Winchester Model 12
JCooperfan1911
member
- Joined
- Oct 8, 2020
- Messages
- 2,709
A Savage 99, even if it were the budget models, in .308 would be an amazing choice.
But AR15s and Glocks are what drive the market. Most of the guns mentioned here will appeal to us older guys, but the youth shooters now seem totally uninterested in the past.
But AR15s and Glocks are what drive the market. Most of the guns mentioned here will appeal to us older guys, but the youth shooters now seem totally uninterested in the past.
Omaha-BeenGlockin
Member
S&W 3913
Winchester 94/22
Is what I can think of right off hand.
Winchester 94/22
Is what I can think of right off hand.
Gridley
Member
A LeMat revolver - you know, the one with the 20ga shotgun barrel. 
- Status
Similar threads
- Locked
