Pay it Forward in Reloading

Mark_Mark said:
I think .357 max and 360 DW is being replace with commercial available at Walmart 350 Legend
Click to expand...
357 Max was always a niche cartridge, in a niche application.

360 DW is even more so - almost a wildcat except for the Dan Wesson revolver, AFAIK.

Both cartridges could disappear and most people, having never known of their existence, would never miss them.
 
Hooda Thunkit said:
357 Max was always a niche cartridge, in a niche application.

360 DW is even more so - almost a wildcat except for the Dan Wesson revolver, AFAIK.

Both cartridges could disappear and most people, having never known of their existence, would never miss them.
Click to expand...
my only reference to .357 Max was from a old episode of IV8888 with Berry like 10 years ago.and seen a huge bag of brass at my LGS 4 years ago
 
BIZERKO666 said:
Anyone out there running a Lee 3-turret or a Pro 1000? I have a couple 3-hole die holders for you. PM me and I’ll get them to you. First come first served.View attachment 1104897View attachment 1104898
Click to expand...
Man I would jump on that. But I've been blessed by PIF already this week. Time to let someone else get some.
I need to finish sorting my brass do I can give it on here. But there's been a tent revival this week. Been kind of busy...
 
MacAR said:
I have 14 270 WSM cases of anyone wants them. I've no use for them, and since they were given to me I feel like I ought to pass them along. PM your address and they're yours.

Mac
Click to expand...
what’s more rare, the 270 or 280?
 
Mark_Mark said:
what’s more rare, the 270 or 280?
Click to expand...
No idea Mark. I don't usually see or hear about 270 wsm, but since I've never heard of 280wsm until today I'd guess the 280 is more scarce. A buddy of mine brought me a big bag of brass yesterday and they were in it, and I figured somebody would want them.

Mac

Mac
 
I have a partial box of Hornady FTX .444 Marlin 265gr. .430 bullets. Bought them by accident for my 44 Mag deer rifle. Was able to work up a load that shot well but nowhere near the 2000-2200 fps velocities that Hornady recommends for this bullet. I figured I’d see if someone else could use them for their intended rifle instead of using them
As expensive plinking ammo. There are 40 left in the box
 
HandyAndy said:
I have a partial box of Hornady FTX .444 Marlin 265gr. .430 bullets. Bought them by accident for my 44 Mag deer rifle. Was able to work up a load that shot well but nowhere near the 2000-2200 fps velocities that Hornady recommends for this bullet. I figured I’d see if someone else could use them for their intended rifle instead of using them
As expensive plinking ammo. There are 40 left in the box
Click to expand...
I have 8 or so boxes .444 factory ammo. Dies, and powder… only missing rifle! lol
 
OK. In a fit of "I think I need that", I purchased several bags of 12 gauge wads which (as it turns out) are not really good for my applications. Up for grabs are the following items:

Clay Buster CB6100-12 WAA12 clone good for 7/8 oz loads (in tapered hulls) quantity 495
Clay Buster CB8100-12 TGT12 clone good for 7/8 oz loads quantity 500
Clay buster CB1100-12 WAA12-SL clone good for 7/8 oz loads (in tapered hulls) quantity 492

Regular rules - first PM takes the stuff!
 
Akula69 said:
OK. In a fit of "I think I need that", I purchased several bags of 12 gauge wads which (as it turns out) are not really good for my applications. Up for grabs are the following items:

Clay Buster CB6100-12 WAA12 clone good for 7/8 oz loads (in tapered hulls) quantity 495
Clay Buster CB8100-12 TGT12 clone good for 7/8 oz loads quantity 500
Clay buster CB1100-12 WAA12-SL clone good for 7/8 oz loads (in tapered hulls) quantity 492

Regular rules - first PM takes the stuff!
Click to expand...
Now That’s a quality PIF!!! good job!!!
 
Akula69 said:
OK. In a fit of "I think I need that", I purchased several bags of 12 gauge wads which (as it turns out) are not really good for my applications. Up for grabs are the following items:

Clay Buster CB6100-12 WAA12 clone good for 7/8 oz loads (in tapered hulls) quantity 495
Clay Buster CB8100-12 TGT12 clone good for 7/8 oz loads quantity 500
Clay buster CB1100-12 WAA12-SL clone good for 7/8 oz loads (in tapered hulls) quantity 492

Regular rules - first PM takes the stuff!
Click to expand...
I don’t know enough about reloading shotshell to know if that stuff would help me or not. :(
 
GeoDudeFlorida said:
I don’t know enough about reloading shotshell to know if that stuff would help me or not. :(
Click to expand...

I've been slowly accreting vintage shotshell reloading equipment, but haven't gotten around to trying to use the different pieces yet. I understand the Lee unit. And the Herter's paper hull softener makes sense. But there's a Pacific Blue thing, a roll crimper, and some other darned contraption that I need to surf the web for operating instructions. Another thing I haven't gotten around to doing with competing interests
 
CoalCrackerAl said:
I have some 300 B.O brass up for grabs. I didn't count them Tomorrow ill get them together. They will tumbled and de-caped.
Click to expand...
300 BLK with Supressor will be my new project after my Colt SAA obsession

Already got all the parts! 300 BLK is ment fir short and silence … just like me. Reloaders dream! fir heavy and slow
 
You must log in or register to reply here.

Similar threads

S
  • Locked
.277 bullets,pay it forward...
Replies
7
Views
313
climbnjump
climbnjump
primalmu
  • Locked
Pay It Forward Idea
Replies
13
Views
883
NeuseRvrRat
NeuseRvrRat
Patocazador
  • Locked
Pay It Forward in Hunting
2
Replies
48
Views
2K
WestKentucky
WestKentucky
LiveLife
  • Locked
Thank You THR - Pay it Forward
79 80 81 82 83 84 85 86 87 88
Replies
2K
Views
245K
Dudedog
Dudedog
M
  • Locked
There’s more than one way to Pay It Forward...
Replies
13
Views
696
Encoreman
E
Back
Top