Cabelas Gun Counter Rep Let My Gun Fall!

Status
Not open for further replies.

UKWildcatFan

Member
Joined
Nov 4, 2009
Messages
517
Location
St. Louis metro
...off the rack. They were installing my AR scope and the dude failed to secure it on their rack and it fell off to the ground. Couldn't believe it. Sales manager came over to inspect it with me, but c'mon. I just called their headquarters to tell them and she's calling the store manager and one of them will be calling me back. Carelessness doesn't belong in a gun dept.
 
They were installing my AR scope and the dude failed to secure it on their rack and it fell off to the ground.

Did he do push-ups afterwards?

In all seriousness, stuff happens. It matters whether he was utterly careless and tossing your gun around, or thought it was secure and then it fell. If it was the latter, then surprise, the guy's a human. If the former, then he's a careless human and you should go elsewhere. Of course you could always support your local gunsmith instead of a big box store. That's a personal choice, but I won't let a chain work on any of my guns.

The good news here is that it couldn't have happened to a better platform. Optics aside, if an AR can't survive a fall from a few feet you know you got the wrong brand. You didn't say where they were at in the process of installing the scope, but as long as they make sure the job is done well you should be good to go.
 
Yeah, I'm rarely in Cabelas, but my local GS was closed and I needed to get it installed quickly. I always go to local guys for everything.

Oh, and I just had on Magpul MBUS sites at the time. Scope was still in the box. 20 people were waiting in line to look at handguns and they looked like they were watching a train crash.
 
Is the gun a safe queen or a shooter? I doubt it hurt the gun other than cosmetics. I would have installed my own scope instead of some unknown. That's a very durable gun. Watch out for heavy brush it might scratch it. Be careful crawling in the mud with it also. People make mistakes and it seems today others want a piece of them for it or compensation. If he said he was sorry get over it. If there was any real damage Cabellas would have stepped up. Do you want him fired? Do you want money? Do you think he will be more careful in the future and learned? Why did you call corporate? Just to put a bad mark on his future? Do you think he did it on purpose? Its a Battle Rifle not a Weatherby Mark V Deluxe.
 
Last edited:
Unless damage was done or the guy was totally cavalier about it, just let it go. Stuff happens, and if the fellow already felt bad, getting him written up by his superior will only make him mad instead of guilt ridden.
 
What matters if they will make any problems right, did it damage anything?
I would double and triple check but if there's no damage, no harm....no foul. If there is ANY damage they need to fix it to point which satisfies you.

I would also say while I do agree with you, careless dose not belong any where near a firearm. BUT no-body's perfect it happens, I was once told there's only been one perfect person and we crucified him. The store management just needs to pay attn, if he made a mistake once...give him a pass. If he is really being careless it will show up in other areas at which point they can let him stock clothes.


My 2¢, and it's what what you paid for it.:neener:
DS
 
Oh, and I just had on Magpul MBUS sites at the time. Scope was still in the box. 20 people were waiting in line to look at handguns and they looked like they were watching a train crash.

You should be fine then. Magpul products aren't exactly ceramic ornaments when it comes to surviving use/abuse.
 
I found what appeared to be an unissued, all number matching, 1895 dated Mauser on their rack. It had a zip tie holding the bolt shut. I asked a sales guy if I could work the bolt and inspect the bore. He pulled out a pocket knife and pryed with the backside of his knife on the wood until it cut the tie. It didn't even occur to him that he was damaging the stock on a pristine 117 year old gun.
Some people don't comprehend taking care of things.
 
Yeah I'd call that a learning experience. I used to let jiffy lube change my oil...
 
I have a hard time relating to having somebody else install a scope.

I guess if they have a laser bore sighter it could be helpfull... but it isn't at all difficult.

If the rifle was damaged and they wouldn't make it right, I could see calling HQ. But if all is well, I don't see the point.

Have you never dropped something of value?
 
I have a hard time relating to having somebody else install a scope.

Indeed. Maybe if the gun needed to be drilled and tapped, but just mounting it sounds almost as silly to me as taking your mags to the store so they can load them up for you.

Either way, as said if there's no damage I wouldn't worry about it.
 
Come on guys, remember this is the High Road. I have friends that shoot, that bring their scopes to me to mount and then boresight. To be honest they do not have levels and such to get the scope straight. Lets not be too harsh on our fellow gun owners. Again UK, sorry this happened. I have a couple AR's that I would laugh if they hit and were not damaged, but I have three that I might feel like crying. I hope the scope wasn't damaged. If the guy was apologetic, I would just let it slide, if he acted like a tool, I would press it. I agree though. I was looking (still in the box)at the first Hk MR556 I had seen and another customer wanted to see it. He began charging it and dry firing it. He then started acting up with it like he were a in a shoothouse. He started talking about how he wouldn't pay that much money for an AR. When the store owner ask if I wanted it, I replied no. I personally will not buy a new "expensive"( to me) rifle that has been displayed. I am OCD about it. But that is my choice. I found one a month later that was still sealed until I inspected it to purchase. If I am getting a great deal on a new but displayed rifle, I have no problem buying it. Before people start flaming me, I have always been OCD about my firearms. To each their own.
 
Last edited:
I smell someone loosing their job. Maybe 2 people.

This is why I don't like to go shopping with my Dad. He has standards of customer service that if you don't answer his question the way HE wants you to answer it, he'll go to a different store. I agree with what was said before...

If there was no damage, or minor cosmetic damage on a work gun, then a simple apology will suffice.
If there was damage, but they fixed the issue or compensated you justly in some other way, that will suffice.
If there was damage and they did nothing, then write to the supervisor and/or find a different store.

If it was no big deal, or if they fixed the problem, then whatever...mistakes happen.
 
Status
Not open for further replies.
Back
Top