I'm with you on h110 being the velocity king in 357. But I figure if I'm going for the velocity 4227 gives I'll use a faster powder. If I'm going...
My wife is one. Busting clay pigeons on a berm turned her into a ammo burning fiend. Then she found the steel challenge range. I ended up letting...
I already have. He used it to deer hunt until he decided he likes a Sabatti rifle better because it's iron sighted.
I have a mouse l more diverse assortment than that and I am kicking the same idea around. My nephew summed it up when he said which one will you...
Mine started at well over 12 pounds. It was heavier than my DA Smith. The DA on it maxed out my scales
If you're good with mechanisms. You can shim the spring to drop the trigger pull to under 6 pounds. Too much and the trigger won't reset without...
My guess is that data may be why they posted that warning. I've loaded them using other data that was milder without issue. But like you. I have...
How close to the ragged edge do you load? Have you tried R22? It likes to be loaded hot and has some very noticeable lot to lot variances. Like...
My nagant didn't push the cylinder all the way forward. It had sticky extraction like you described until I soldered a shim on the little shoe...
If you have been on the forum a while. You would see Taliv in general makes very informative replies and isn't rude.
Speer makes a half jacket 308 110 gr. I used data from an article. I don't recall what it was. But 110 grain plated works well.
The mule of the gun world...
That sounds like my brother's super Blackhawk. It's an interesting recoil to say the least.
I think he's wanting the biggest fire ball and the most recoil he can find. I did the same thing. That 180 WFN will leave a serious wound channel....
In a way this is like what size gloves should I wear. I squeeze my hands into 9" gloves. A 1.5" handle would be my choice. If you have long...
Cut to the chase and try H110...;)
But that requires the intent of building a second one. One part at a time can be justified... Then you have all the original pieces.
Just modify that one. You'll end up with enough parts to justify building one after a while.
Some people's eyes don't work as well with iron sights as others. I ran a real on my Rossi until I got done with load development. As a kid I shot...
I've done this after an over aggressive crimp setting. It works if care is taken.
Separate names with a comma.