I have a 9mm Shield and a friend has the same gun in 40. The 40 definitely has a more snappy recoil.
They make them with or without a covered back strap too
My first semi auto pistol was a C9. It was accurate and ran everything except Russian steel cased ammo which would stick in the chamber. Being a...
Bigger grips help with the recoil but what really makes it shootable is using my 130gr, mid-range reloads
I too have used it for 147 grain,9mm and thought it worked pretty well
I lost a base plate part for my Sr22 which was purchased 6 years earlier. I called Ruger to buy the part. Told them I lost it. The customer...
Saw a YouTube video a few years ago where they were torture testing a Hipoint C9. At first they took a bunch of loaded mags and had a couple guys...
These are Thai made grips from EBay. They feel a lot like a Magna/T-grip combo
I jokingly refer to my 60 pro as the uncatalogged Trump commemorative. The serial number prefix is DJT
I was shooting reloads with a130 grain bullet, at about 1200fps, so recoil was not too bad at all.
I had my 3 inch model 60 Pro out on Labor Day.
I have installed a 15# rebound slide spring along with a Wolff reduced power main spring...
I used to load 3.6gr of Titegroup with that bullet all the time. It was an accurate and easy to shoot load
They have to pay for that Remington ammo plant they just bought
Nice magnum k frame. If you think that was a bit steep, don't even look at what the ones with a 3 inch barrel are going for
I shoot mine out to 30 yards at a 9" X 11" steel plate. Can usually hit 4 out of 5
I recently shot some of the Federal HST, 135gr Plus P, short barrel load in my 442. It was surprisingly mild and hard to believe it was plus P....
I have a 638, 442 and a 3 inch model 60. With the light weight guns with 38 special plus p, recoil is a bit lighter than the m60 with magnums in...
Not really a Glock upper. The Hipoint is a straight blowback operated gun with a fixed barrel, while the Glock has a tilting barrel design
S&W did not stamp the name on most revolvers prior to or after 1957 and model numbers were stamped from 58 on.
One of the few with a name stamp...
Separate names with a comma.