Right now just safe and functional 12 gauge ammo. Primary use is trap/skeet
Thanks for the help! I kinda figured it was something like that, but wanted to make sure before I began loading ammo
Looking at load data for 12 gauge on the Hodgdon website. For AA hulls, lead shot, 1oz loads using REM 209 primers and WAA12SL wads, they list 4...
Thanks for all the replies. I do add wash and wax when cleaning and the loading process goes very smooth. I may try some lube like One Shot and...
that’s the thing, I haven’t used pins at all when I wet tumble. Just the brass, citric acid, and soap
The primers seat just fine the majority of the time. There’s a few that take a bit more force but nothing I noted as being odd or excessive
Good question. I didn’t notice it while loading too much, just after when I wasn’t as focused on powder charge. It’s at all stations, but mainly...
Recently started wet tumbling and really like it. But I’ve began to get some brass shavings when loading. The cases don’t seem to be sticking, so...
Thank you for responding. Think I’ll go with the wash n wax in the tumbler and see how it does, and try one shot if I get any stickiness when...
Is one shot lanolin based?
You mentioned on a post a year or so ago that you shouldn’t wet tumble lanolin lubed cases, is there a lube you recommend to someone making the...
I had read that wet tumbling with primers still in, and not depriming can cause trouble like stuck primers or only partially decapping. Do you not...
Thank you all for the help! In the middle of a move so it’s still not an immediate changeover. Just trying to figure out logistics Edit to add I’m...
I’m looking into getting into wet tumbling but have a concern or two. First, does wet tumbling make brass stick when loading like when you buy...
Thanks for responding Jake. Is that both plated and FMJ?
Thanks all. I appreciate the info!
So considering that I won’t be pushing the bullets to those velocities, is it ok the load FMJ bullets with the TMJ data?
Wanting to try out loading 9mm 147 grainers for fun (plan on getting a few RMR FMJs). Available powders are 700-X and TiteGroup. My Lyman #49...
Look up Leatherhead Custom Holsters or Sword Slinger Holsters online. Both make great stuff.
There's really no need to substitute or extrapolate data in this case. There's lots of 9mm lead info out there, I'd just use that.
Separate names with a comma.
